setup-architect

name	setup-architect
description	Sets up and installs the AI Software Architect framework in a NEW project for the FIRST time. Use when the user requests "Setup .architecture", "Setup ai-software-architect", "Initialize architecture framework", "Install software architect", or similar setup/installation phrases. Do NOT use for checking status (use architecture-status), creating documents (use create-adr or reviews), or when framework is already set up.
allowed-tools	Read,Write,Edit,Glob,Grep,Bash(git:*,npm:*,node:*,mkdir:*,cp:*,ls:*,test:*)
disable-model-invocation	true

Setup AI Software Architect Framework

Sets up and customizes the AI Software Architect framework for a project.

Overview

This skill performs a complete framework installation:

1. Locates the framework source (plugin install dir or legacy clone)
2. Analyzes the target project (languages, frameworks, structure, patterns)
3. Scaffolds .architecture/ in the target project from framework templates
4. Customizes team members and principles for the detected tech stack
5. Performs an initial system analysis
6. Reports customizations and findings, with explicit next steps

Detailed procedures: references/installation-procedures.md Customization guide: references/customization-guide.md

What happens when you run Setup ai-software-architect

The skill creates a .architecture/ directory in your target project (not in this plugin's repo) and populates it with templates customized for your tech stack. After it finishes you'll have:

• .architecture/decisions/adrs/ — empty, ready for create-adr
• .architecture/reviews/initial-system-analysis.md — your team's first pass at the codebase
• .architecture/members.yml — team customized for your detected stack
• .architecture/principles.md — principles tailored to your frameworks
• .architecture/config.yml — operational config (pragmatic mode, etc.)
• .architecture/templates/ — ADR + review templates ready to use

The skill writes only into your target project's .architecture/. It does not modify code outside that directory.

High-Level Workflow

1. Locate framework source

The framework templates can live in two places: inside the installed Claude Code plugin (canonical, 1.4.0+) or under a legacy .architecture/.architecture/ clone in the target project. Discovery is deterministic — run the framework's own CLI:

# Locate the plugin install on disk first; tools/cli.js lives inside it.
TOOLS_CLI=""
if [ -n "${CLAUDE_PLUGIN_ROOT:-}" ] && [ -f "$CLAUDE_PLUGIN_ROOT/tools/cli.js" ]; then
  TOOLS_CLI="$CLAUDE_PLUGIN_ROOT/tools/cli.js"
else
  TOOLS_CLI=$(find ~/.claude/plugins -type f -name cli.js -path '*ai-software-architect/tools/*' 2>/dev/null | head -1)
fi

if [ -z "$TOOLS_CLI" ] && [ -f ".architecture/.architecture/tools/cli.js" ]; then
  # Legacy clone path: the cli ships in the cloned repo.
  TOOLS_CLI=".architecture/.architecture/tools/cli.js"
fi

if [ -z "$TOOLS_CLI" ]; then
  echo "Framework not found. Install the plugin or clone manually — see error message below."
  exit 1
fi

# Resolve the framework source via the canonical discovery logic.
FRAMEWORK_ROOT=$(node "$TOOLS_CLI" find-source)

Discovery order (encoded in tools/lib/setup-source-discovery.js and tested via tools/test/setup-source-discovery.test.js):

1. ${CLAUDE_PLUGIN_ROOT} env var (if set and contains .architecture/templates/adr-template.md).
2. Recursive search of ~/.claude/plugins/ for any ai-software-architect/ directory containing the sentinel.
3. .architecture/.architecture/ in the target project (legacy clone path).

If find-source exits non-zero, surface its error message verbatim — it tells the user exactly which install option to take.

2. Analyze Project

Identify project characteristics:

• Languages: JavaScript/TypeScript, Python, Ruby, Java, Go, Rust
• Frameworks: React, Vue, Django, Rails, Spring, etc.
• Infrastructure: Testing setup, CI/CD, package managers
• Structure: Directory layout, architectural patterns

Use Glob and Grep to detect technologies, Read to examine configs.

3. Install Framework

Execute installation steps (see references/installation-procedures.md):

# $FRAMEWORK_ROOT is from step 1.
cp -r "$FRAMEWORK_ROOT/.architecture/templates" .architecture/templates
cp "$FRAMEWORK_ROOT/.architecture/principles.md" .architecture/principles.md
cp "$FRAMEWORK_ROOT/.architecture/members.yml" .architecture/members.yml
cp "$FRAMEWORK_ROOT/.architecture/config.yml" .architecture/config.yml

mkdir -p .architecture/decisions/adrs
mkdir -p .architecture/reviews
mkdir -p .architecture/recalibration
mkdir -p .architecture/comparisons
mkdir -p .architecture/agent_docs

• Create directory structure (decisions/adrs, reviews, recalibration, etc.)
• Initialize .architecture/config.yml from the source location's templates
• Set up agent documentation (ADR-006 progressive disclosure)
• Legacy clone path only: remove .architecture/.architecture/ and (with safeguards) the cloned .git/ directory. Plugin path: no clone removal needed — the plugin's install dir stays where it is under ~/.claude/plugins/.

Critical (legacy clone path only): Follow safety procedures when removing .git/ directory. See references/installation-procedures.md § Cleanup Procedures.

4. Customize Architecture Team

Add technology-specific members to .architecture/members.yml:

• JavaScript/TypeScript: JavaScript Expert, framework specialists (React/Vue/Angular)
• Python: Python Expert, framework specialists (Django/Flask/FastAPI)
• Ruby: Ruby Expert, Rails Architect
• Java: Java Expert, Spring Boot Specialist
• Go: Go Expert, Microservices Architect
• Rust: Rust Expert, Systems Programmer

Use template from assets/member-template.yml.

Keep core members: Systems Architect, Domain Expert, Security, Performance, Maintainability, AI Engineer, Pragmatic Enforcer.

Customization details: references/customization-guide.md § Customize Team Members

5. Customize Architectural Principles

Add framework-specific principles to .architecture/principles.md:

• React: Component composition, hooks, unidirectional data flow
• Rails: Convention over configuration, DRY, RESTful design
• Django: Explicit over implicit, reusable apps, use built-ins

Principle examples: references/customization-guide.md § Customize Principles

6. Update CLAUDE.md Integration

If CLAUDE.md exists in project root, append framework usage section:

• Available commands
• Where to find documentation
• How to invoke skills

Template: references/customization-guide.md § Update CLAUDE.md

7. Cleanup

Remove framework development files:

• Framework documentation (README.md, USAGE*.md, INSTALL.md)
• Template .git/ directory (with critical safety checks)

⚠️ IMPORTANT: Follow all safeguards in references/installation-procedures.md § Cleanup.

8. Create Initial System Analysis

Generate comprehensive initial analysis document:

• Each member analyzes system from their perspective
• System overview (stack, structure, patterns)
• Strengths identified
• Concerns raised (with impact levels)
• Recommendations prioritized (Critical/Important/Nice-to-Have)
• Collaborative synthesis of findings

Save to .architecture/reviews/initial-system-analysis.md.

Template: assets/initial-analysis-template.md

9. Report to User

Provide a setup summary using the template below, then the success checklist so the user can verify the install end-to-end.

Provide setup summary:

AI Software Architect Framework Setup Complete

Customizations:
- Added [N] technology specialists: [list]
- Customized principles for: [frameworks]
- Configuration: Pragmatic mode [enabled/disabled]

Initial Analysis Highlights:
- Overall assessment: [assessment]
- Top strength: [strength]
- Top concern: [concern]
- Critical recommendation: [recommendation]

Location: .architecture/reviews/initial-system-analysis.md

Next Steps:
- Review initial analysis findings
- "List architecture members" to see customized team
- "Create ADR for [first decision]" to start documenting
- "What's our architecture status?" to verify setup

Setup successful when...

A first-time user can verify the install by checking that all of these are true:

• .architecture/decisions/adrs/ exists and is empty
• .architecture/reviews/initial-system-analysis.md exists and is non-empty
• .architecture/members.yml lists at least the seven core members plus any technology specialists added in step 4
• .architecture/principles.md exists and includes any framework-specific principles added in step 5
• .architecture/config.yml exists (pragmatic mode flag visible)
• .architecture/templates/ contains adr-template.md and review-template.md
• No leftover .architecture/.architecture/ directory (legacy clone path only)
• Running What's our architecture status? returns a coherent summary
• Running List architecture members shows the customized team

If any of these fail, see the recovery section below.

Recovery

If setup fails partway through (e.g., framework files copied but customization didn't run):

1. Inspect .architecture/ to see what landed.
2. If only a few files copied, the simplest recovery is rm -rf .architecture/ and re-run Setup ai-software-architect (no project code is touched outside .architecture/).
3. If most files are in place but members.yml or principles.md weren't customized, you can re-run setup; the skill will detect the partial install and offer to complete the customization step rather than restart.
4. If the initial analysis didn't run, ask: Generate initial system analysis at .architecture/reviews/initial-system-analysis.md — the orchestrator will dispatch the team without redoing the file install.

If setup ran but the team isn't right for your project, you don't need to re-run setup. Edit .architecture/members.yml directly (set CLAUDE_ALLOW_PROTECTED=1 to satisfy the PreToolUse hook) and run node tools/cli.js generate-subagents to refresh the corresponding agents/<id>.md files.

Error Handling

Framework source not found:

I can't find the framework templates. Two installation options:

  Recommended (plugin):
    /plugin marketplace add codenamev/ai-software-architect
    /plugin install ai-software-architect@ai-software-architect

  Legacy (clone):
    git clone https://github.com/codenamev/ai-software-architect .architecture/.architecture

After installing, run "Setup ai-software-architect" again.

Already set up:

Framework appears to be already set up.

To verify: "What's our architecture status?"
To reconfigure: Manually edit .architecture/members.yml and .architecture/principles.md

Unclear project structure:

Could not clearly identify project type. Please describe:
- Primary programming language(s)
- Framework(s) used
- Project purpose

I'll customize the framework accordingly.

Related Skills

After Setup:

• list-members - View customized team
• architecture-status - Verify setup completion
• create-adr - Document first decision

Initial Work:

• Review initial-system-analysis.md findings
• specialist-review - Deep-dive on specific concerns
• create-adr - Document existing key decisions

Workflow Example: Setup → Review initial analysis → Create ADRs → Status check → Regular reviews

Notes

• Customize based on actual project, not every possible option
• Be specific about why each customization was made
• Initial analysis should be thorough but focused on actionable findings
• Safety checks during cleanup are non-negotiable

Documentation

• Installation details: references/installation-procedures.md
• Customization guide: references/customization-guide.md
• Initial analysis template: assets/initial-analysis-template.md
• Member template: assets/member-template.yml
• Common patterns: ../_patterns.md