t0869-standard-application-layer-protocol

name	T0869_standard-application-layer-protocol
description	Adversaries may establish command and control capabilities over commonly used application layer protocols such as HTTP(S), OPC, RDP, telnet, DNP3, and modbus.
category	configuration
version	18.1
author	cyberstrike-official
tags	["mitre-attack","ics","t0869","command-and-control"]
technique_id	T0869
tactic	command-and-control
all_tactics	["command-and-control"]
platforms	["ICS"]
mitre_url	https://attack.mitre.org/techniques/T0869
tech_stack	["ics"]
cwe_ids	["CWE-300"]
chains_with	[]
prerequisites	[]
severity_boost	{}

T0869 Standard Application Layer Protocol

High-Level Description

Adversaries may establish command and control capabilities over commonly used application layer protocols such as HTTP(S), OPC, RDP, telnet, DNP3, and modbus. These protocols may be used to disguise adversary actions as benign network traffic. Standard protocols may be seen on their associated port or in some cases over a non-standard port. Adversaries may use these protocols to reach out of the network for command and control, or in some cases to other infected devices within the network.

Kill Chain Phase

• Command and Control (TA0101)

Platforms: ICS

What to Check

• Identify if Standard Application Layer Protocol technique is applicable to target ICS environment
• Check ICS/SCADA systems for indicators of Standard Application Layer Protocol
• Verify mitigations are bypassed or absent (3 known mitigations)
• Assess detection coverage (1 detection strategies)

How to Test

Identify Attack Surface

Determine if the target ICS/SCADA environment is susceptible to Standard Application Layer Protocol by examining operational technology systems and network architecture.

Assess Existing Defenses

Review whether mitigations for T0869 are in place. If defenses are absent or misconfigured, this technique may be exploitable in the ICS environment.

Remediation Guide

M0930 Network Segmentation

Ensure proper network segmentation between higher level corporate resources and the control process environment.

M0931 Network Intrusion Prevention

Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware can be used to mitigate activity at the network level.

M0807 Network Allowlists

Network allowlists can be implemented through either host-based files or system host files to specify what external connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in the Filter Network Traffic mitigation.

Detection

Detection of Standard Application Layer Protocol

Risk Assessment

Finding	Severity	Impact