create-workflow-aspire

name	create-workflow-aspire
description	This skill creates a Dapr workflow application with .NET Aspire. Use this skill when the user asks to "create a workflow with Aspire", "write an Aspire workflow application" or "build a workflow app with .NET Aspire".
allowed-tools	["Bash(dotnet:*)","Bash(aspire new:*)","Bash(~/.aspire/bin/aspire new:*)","mcp__ide__getDiagnostics"]

Create Dapr Workflow .NET Aspire Application

Overview

This skill describes how to create a Dapr Workflow application using Aspire. The generated solution uses Aspire to orchestrate the Dapr sidecar, a Valkey state store, and the Diagrid Dev Dashboard as container resources.

Execution Order

You MUST follow these phases in strict order:

1. Check specification - Check if the user specified what needs to be built.
2. Project Setup — Create all files and folders.
3. Verify — Verify that the project builds.
4. Create README.md — Create a readme that summarizes what is built and how to run & test the application. Do not provide instructions at the end of this phase.
5. Show final message - Your LAST output MUST be EXACTLY the message defined in the ## Show final message section. Do NOT add any other text, summary, or commentary after it.

Check specification

If you don't have enough context what to build, ask the user the following clarifying questions one by one using an interview style:

1. What is the purpose of the workflow application?
2. Describe how workflow should work. Which patterns should be used?
3. Specify the input and output objects of the workflow.
4. What's the name of this project? This will be used as the folder name and solution name. Don't use any spaces in this name.

Prerequisites

The following must be installed by the user before this skill can run:

• .NET 10 SDK
• Aspire CLI — install via curl -sSL https://aspire.dev/install.sh | bash or irm https://aspire.dev/install.ps1 | iex
• Docker or Podman
• Dapr CLI

Additional runtime dependencies (handled during project setup):

• NuGet package: Dapr.Workflow version 1.18.4 (ApiService)
• NuGet package: CommunityToolkit.Aspire.Hosting.Dapr version 13.0.0 (AppHost)
• NuGet package: Aspire.Hosting.Valkey version 13.4.4 (AppHost)

Project Setup

Scaffold the solution using the Aspire CLI inside the current location where the terminal is open, then customize it for Dapr Workflow.

IMPORTANT: Always include --non-interactive and --test-framework none in the aspire new command below. Omitting either flag causes the command to block waiting for user input, which breaks skill execution.

aspire new aspire-starter -n <SolutionRoot> -o <SolutionRoot> --non-interactive --test-framework none

After scaffolding:

1. Remove the Web project — The generated <SolutionRoot>.Web project is not needed. Delete the <SolutionRoot>.Web folder and remove its project reference from <SolutionRoot>.AppHost.csproj and the .sln file.
2. Add NuGet packages — run these commands from inside the <SolutionRoot> folder (do NOT cd elsewhere between commands, as the working directory persists across Bash calls and will break subsequent file operations that use relative paths):

   dotnet add <SolutionRoot>.ApiService/<SolutionRoot>.ApiService.csproj package Dapr.Workflow --version 1.18.4
   dotnet add <SolutionRoot>.AppHost/<SolutionRoot>.AppHost.csproj package CommunityToolkit.Aspire.Hosting.Dapr --version 13.0.0
   dotnet add <SolutionRoot>.AppHost/<SolutionRoot>.AppHost.csproj package Aspire.Hosting.Valkey --version 13.4.4
   

3. Create/update source files — Create all files described below, using REFERENCE.md for complete code.

Folder structure

<SolutionRoot>/
├── .aspire/
│   └── settings.json
├── .gitignore
├── <SolutionRoot>.sln
├── <SolutionRoot>.ApiService/
│   ├── <SolutionRoot>.ApiService.csproj
│   ├── <SolutionRoot>.ApiService.http
│   ├── Program.cs
│   ├── appsettings.json
│   ├── appsettings.Development.json
│   ├── Properties/
│   │   └── launchSettings.json
│   ├── Models/
│   │   └── <ModelName>.cs
│   ├── Workflows/
│   │   └── <WorkflowName>.cs
│   └── Activities/
│       └── <ActivityName>.cs
├── <SolutionRoot>.AppHost/
│   ├── <SolutionRoot>.AppHost.csproj
│   ├── AppHost.cs
│   ├── appsettings.json
│   ├── appsettings.Development.json
│   ├── Properties/
│   │   └── launchSettings.json
│   └── Resources/
│       ├── statestore.yaml
│       └── statestore-dashboard.yaml
└── <SolutionRoot>.ServiceDefaults/
    ├── <SolutionRoot>.ServiceDefaults.csproj
    └── Extensions.cs

.gitignore

Visual Studio style .gitignore file in the solution root. Ignores build output (bin, obj), debug/release folders, and other common .NET artifacts. See REFERENCE.md for full example.

AppHost.cs

Configures Dapr via AddDapr(), adds a Valkey cache container on port 16379, registers the ApiService project with WithDaprSidecar(), and adds the Diagrid Dashboard as a container resource. See REFERENCE.md for full example and key points.

AppHost .csproj

Uses Aspire.AppHost.Sdk, references CommunityToolkit.Aspire.Hosting.Dapr and Aspire.Hosting.Valkey packages, includes a project reference to ApiService, and copies Resources to output. See REFERENCE.md for full example.

Resources/statestore.yaml

State store component for the apiservice Dapr sidecar. Uses localhost:16379 to connect to the Valkey container managed by Aspire. See REFERENCE.md for full example and key points.

Resources/statestore-dashboard.yaml

State store component for the Diagrid Dashboard container. Uses host.docker.internal:16379 because the dashboard runs in a Docker container and needs to reach Valkey on the host. Scoped to diagrid-dashboard. See REFERENCE.md for full example and key points.

ApiService Program.cs

Same pattern as the dotnet skill but adds builder.AddServiceDefaults() at the start and app.MapDefaultEndpoints() before app.Run(). Uses AddDaprWorkflow() to register the Dapr Workflow runtime (workflows and activities are auto-registered). Uses DaprWorkflowClient to schedule workflow instances and query status via HTTP endpoints. Includes start, status, pause, resume, and terminate endpoints. See REFERENCE.md for full example and key points.

ApiService .csproj

Standard ASP.NET Core web project targeting net10.0 with the Dapr.Workflow package and a project reference to ServiceDefaults. See REFERENCE.md for full example.

Models

Record types for workflow and activity input/output, placed in a Models folder. Must be serializable since Dapr persists workflow state. See REFERENCE.md for full example and key points.

Workflow Class

Inherits from Workflow<TInput, TOutput>, overrides RunAsync, and orchestrates activities via context.CallActivityAsync. Must be internal sealed. Place in a Workflows folder/namespace. See REFERENCE.md for full example, key points, determinism rules, and workflow patterns (chaining, fan-out/fan-in, sub-workflows).

Activity Class

Inherits from WorkflowActivity<TInput, TOutput>, overrides RunAsync, and contains the actual business logic. Must be internal sealed. Place in an Activities folder/namespace. See REFERENCE.md for full example and key points.

ServiceDefaults Extensions.cs

Template-generated file that adds OpenTelemetry, health checks, service discovery, and resilience. No modifications needed — keep as scaffolded by aspire new. See REFERENCE.md for reference.

.ApiService.http

HTTP request file for testing the workflow endpoints. Contains a start request (POST) to schedule a new workflow instance and a status request (GET) to query the workflow state. See REFERENCE.md for full example.

Verify

IMPORTANT: After Project Setup you MUST show these exact verification instructions:

1. Run dotnet build on the .sln file to check for build errors.
2. Instruct the user to start the application with aspire run in the solution root to start the Aspire-orchestrated workflow app.

Create README.md

IMPORTANT: After Verify you MUST run these instructions:

Create a README.md file inside the <SolutionRoot> folder.

The README contains the following sections:

1. Summary of what this folder contains.
2. Architecture description that explains the technology stack (Aspire, Dapr Workflow, Valkey, ServiceDefaults) and prerequisites to run it locally. DO NOT suggest to run Redis or Valkey separately since Aspire manages it as a container resource.
3. A mermaid diagram that explains the workflow.
4. How to start the application using aspire run.
5. List the available endpoints in the ApiService Program.cs file and provide examples how to call these using curl. Also include a link to the <SolutionRoot>.ApiService/<SolutionRoot>.ApiService.http file.
6. How to inspect the workflow execution using the Diagrid Dev Dashboard (managed by Aspire, accessible via the Aspire dashboard resource links).

Show final message

IMPORTANT: This is the LAST step. After Create README.md, your final output MUST be ONLY the message below — no preamble, no summary, no additional commentary, only replace the with the actual value:

The workflow application is created. Open the README.md file in the folder for a summary and instructions for running locally.