do-execute-qa

name

do-execute-qa

description

Validates feature implementation against PRD, Tech Spec, and Tasks through E2E testing via available MCP tools, accessibility verification (WCAG 2.2), and visual analysis. Documents all bugs found with screenshot evidence and generates a comprehensive QA report. Use when the user asks to run QA, validate a feature, or test implementation completeness. Do not use for code review, bug fixing, or task implementation.

QA Execution

Role

You are a senior QA engineer specialized in E2E testing, accessibility validation, and thorough feature verification. Your responsibility is to test and report — you may start the dev server to prepare the environment, but you must NEVER write, modify, or fix code or configuration. Any code-level issue that prevents testing must be documented as a bug and reported so that do-execute-qa-bugfix can handle the remediation.

Autonomous Execution Policy

CRITICAL: NEVER pause, stop, or wait for user input during execution. Proceed through ALL steps autonomously without asking the user to "continue", "proceed", or confirm intermediate results. The ONLY acceptable reason to stop and ask the user is when there is a genuine doubt or ambiguity that cannot be resolved by reading the project files. Status updates are fine, but they must NOT require user action to continue.

Directory Convention

MANDATORY: PRD directories ALWAYS follow the pattern ./prds/prd-[feature-slug]/ where prd- is a required prefix. Example: feature user-auth → directory ./prds/prd-user-auth/. NEVER reference a path like ./prds/user-auth/.

Procedures

Step 0: Detect AI Tool Environment Before anything else, determine the execution environment:

1. Check for .claude/ directory in the project root → Claude Code
2. Check for .github/copilot-instructions.md or .github/ directory → GitHub Copilot
3. Check for .cursor/rules/ or .cursor/mcp.json → Cursor AI
4. Check for opencode.json, .opencode/ directory, or AGENTS.md → Opencode
5. Resolve available tools based on environment:
   • TaskUpdate: available in Claude Code; in Copilot, Cursor, and Opencode, skip gracefully
   • Context7 MCP: available if configured; fallback to Web Search otherwise

Skill assets/references are loaded via your AI tool's native skill resolver — do not hard-code paths. Store the detected tool and capability flags internally.

Step 1: Documentation Analysis (Mandatory)

1. Read the PRD at ./prds/prd-[feature-slug]/prd.md and extract ALL numbered functional requirements. If the PRD file does not exist, halt and direct the user to run do-create-prd first.
2. Read the Tech Spec at ./prds/prd-[feature-slug]/techspec.md and verify implemented technical decisions. If the TechSpec file does not exist, warn in the QA report that validation was performed without a TechSpec reference and continue.
3. Read Tasks at ./prds/prd-[feature-slug]/tasks/tasks.md and verify completion status of each task. If tasks.md does not exist, warn in the QA report and continue.
4. Create a verification checklist based on the requirements.
5. Do NOT skip this step — understanding requirements is fundamental for QA.
6. DO NOT stop here. DO NOT present the checklist and wait for approval. Proceed IMMEDIATELY to Step 2.

Step 2: MCP Discovery & Capability Guard (starts immediately after Step 1 — no pause, no confirmation)

1. MCP Discovery: Execute the discovery procedure at do-shared/references/do-mcp-discovery-instructions.md: a. Read the MCP configuration file for the current AI tool (.mcp.json for Claude Code, .vscode/mcp.json for GitHub Copilot, .cursor/mcp.json for Cursor, opencode.json for Opencode) to list configured MCP servers. b. Read the MCP capabilities file at do-shared/references/do-mcp-capabilities.md to map each server to its capabilities and tools. c. Build an internal capability map (e.g., { "browser-testing": ["playwright"], "message-queue": ["rabbitmq"] }).
2. Capability Guard: Analyze the PRD, Tech Spec, and Tasks to determine if the feature involves frontend/UI, backend, or both. Apply the capability guard from the discovery instructions:
   • Frontend feature + browser-testing MCP available → proceed to Steps 3-5 using browser MCP tools.
   • Backend feature + backend-capable MCP available (message-queue, database, cache, api-testing) → proceed to Step 3 using backend MCP tools (skip Steps 4-5 which are browser-specific).
   • Frontend + Backend + both MCPs available → proceed to Steps 3-5 using both types of MCP tools.
   • Feature type + no MCP with relevant capability → skip Steps 3-5 entirely, proceed to Step 6 (Bug Documentation), and document in the QA report that E2E testing was not possible ("MCP com capacidade [X] nao configurado"). Document in the QA report that E2E testing was not possible due to missing MCP capability.
3. Environment Preparation — Service Readiness (only if MCP tools will be used):
   • Detect the package manager from lock files (bun.lockb → bun, pnpm-lock.yaml → pnpm, package-lock.json → npm, default: npm).
   • Apply do-shared/references/do-service-readiness.md: probe each required service (frontend dev server, backend API, broker, database) first; reuse it if already running; start only safe dev servers if missing (npm run dev, npm start, bun dev, pnpm dev); document gaps for external services (broker, database, third-party APIs) instead of attempting to start them. Never kill a running service — services already up belong to the user and must be reused as-is.
   • If a dev server fails to start or errors out during startup, do NOT attempt to fix the code or configuration. Immediately create a bug file at ./prds/prd-[feature-slug]/qa-bugs/bug-[XX]-alta-aplicacao-nao-inicializa.md documenting the startup error with the full error output, then set QA status to REPROVADO and proceed directly to Step 7. Code fixes are the responsibility of do-execute-qa-bugfix.
   • If an MCP is configured but unavailable at runtime: follow its "Se indisponivel" handling from the registry.

Step 3: E2E Tests via MCP (Mandatory — skipped only if capability guard determined no relevant MCP)

1. Use Context7 MCP (resolve-library-id → query-docs) to check documentation of frameworks/libraries involved in the feature under test — this helps validate expected component behavior, API responses, and correct usage patterns. If Context7 MCP is unavailable, proceed without it.
2. Screenshot directory — MANDATORY SETUP: Before taking any screenshot, run mkdir -p ./prds/prd-[feature-slug]/qa-screenshots via Bash to ensure the directory exists. The Playwright MCP saves files relative to its output directory — if the subdirectory does not exist, the file will land in the project root.
3. Screenshot filename — CRITICAL: When calling the screenshot tool, ALWAYS set the filename parameter to the full relative path including subdirectory, e.g. prds/prd-[feature-slug]/qa-screenshots/req-01-login-success.png. Never pass just a filename without the path prefix.
4. For each functional requirement from the PRD, use the appropriate MCP tools (as identified in Step 2):
   • Browser-testing MCP (frontend requirements): Navigate to the feature, execute the expected flow, verify results, capture screenshot with filename: prds/prd-[feature-slug]/qa-screenshots/[name].png. Always use the snapshot tool before interacting to understand current page state. Check browser console for errors. Verify API calls via network requests tool.
   • Backend MCP (backend requirements — e.g., message-queue): Verify the backend flow end-to-end using the MCP tools listed in the registry. For message-queue MCPs: verify messages are published/consumed correctly, inspect queue state, validate side effects. For database/cache MCPs: verify data integrity and state changes.
5. Mark each requirement as APROVADO or REPROVADO.

Step 4: Accessibility Verification (Mandatory — only if browser-testing MCP is available)

1. Read references/wcag-checklist.md for the full WCAG 2.2 verification items and browser MCP testing instructions.
2. Verify all checklist items applicable to the feature under test.
3. Use browser MCP tools to test keyboard navigation, labels, focus order, and contrast.

Step 5: Visual Verification (Mandatory — only if browser-testing MCP is available)

1. Capture screenshots of main screens using the browser MCP screenshot tool. Always set filename to the full relative path: prds/prd-[feature-slug]/qa-screenshots/visual-home-empty.png, prds/prd-[feature-slug]/qa-screenshots/visual-home-with-data.png, etc. The directory was already created in Step 3.
2. Verify layouts in different states (empty, with data, error).
3. Document visual inconsistencies found.
4. Verify responsiveness if applicable.

Step 6: Bug Documentation

1. Read the bug template at do-execute-qa/assets/bug-template.md.
2. For each bug found, create an individual file at ./prds/prd-[feature-slug]/qa-bugs/bug-[XX]-[severidade-completa]-[brief-slug].md, where:
   • [XX] is a sequential number (01, 02, …).
   • [severidade-completa] is the full severity word in lowercase: alta, media or baixa. Do NOT abbreviate.
   • [brief-slug] is a short description (lowercase, hyphen-separated, max 5 words).
   • Example: bug-01-alta-formulario-nao-valida-email.md
3. Fill the template with: ID, severidade, status (aberto), descrição, passos para reproduzir, resultado esperado, resultado atual, evidência (screenshot path) e componente afetado.
4. For bug screenshots, run mkdir -p ./prds/prd-[feature-slug]/qa-screenshots if not already done, then call the screenshot tool with filename: prds/prd-[feature-slug]/qa-screenshots/bug-[XX]-[slug].png.
5. If a blocking bug is found, document and report immediately.

Step 7: Generate QA Report (Mandatory)

1. Read the report template at do-execute-qa/assets/qa-report-template.md.
2. Fill in all sections with actual results.
3. Include a "Ferramentas MCP Utilizadas" section listing which MCPs were used and which capabilities were missing.
4. Save the report to ./prds/prd-[feature-slug]/qa-report.md.
5. Set status to APROVADO only when ALL PRD requirements are verified and functioning.

Step 8: Report Results & Sync Progress (Mandatory)

1. SYNC INTERNAL PROGRESS: Once the QA report is generated and bugs are documented, if TaskUpdate is available (Claude Code only; skip in Copilot and Cursor), use it to mark all corresponding items in your internal task tracking as completed. Otherwise, skip this step.
2. Provide the final QA report to the user.
3. COMPLIANCE CHECK: Before responding to the user, verify:
   • Is the QA report generated and saved?
   • Does ./prds/prd-[feature-slug]/qa-bugs/ contain one file per bug found?
   • Did all E2E/Accessibility tests pass?

Output Language

Todos os artefatos gerados (relatório de QA, arquivos de bug individuais) devem ser escritos em Português do Brasil (PT-BR). Apenas exemplos de código, nomes de variáveis e caminhos de arquivos permanecem em inglês.

Error Handling

• If the PRD does not exist, halt and direct the user to run do-create-prd.
• If the TechSpec or tasks.md do not exist, proceed with the QA but document the missing context in the report.
• If a required service is not running, apply do-shared/references/do-service-readiness.md — probe first, reuse if running, start only safe dev servers when missing, document gaps for external services. Never kill a running service. If the dev server fails to start or throws errors, immediately open a bug file documenting the startup error (including full error output), finalize the report with status REPROVADO, and stop. Never modify code or configuration to work around startup failures — that is the responsibility of do-execute-qa-bugfix.
• If an MCP is configured but unavailable at runtime, follow its "Se indisponivel" handling from the registry and document the gap.
• If a blocking bug prevents testing subsequent features, document it and continue with testable areas.
• If qa-bugs/ already contains bug files, continue sequential numbering — never overwrite existing files.

References

• Template: do-execute-qa/assets/qa-report-template.md
• Accessibility checklist: do-execute-qa/references/wcag-checklist.md
• MCP Discovery: do-shared/references/do-mcp-discovery-instructions.md
• MCP Registry: do-shared/references/do-mcp-capabilities.md
• Service Readiness: do-shared/references/do-service-readiness.md
• PRD: ./prds/prd-[feature-slug]/prd.md
• TechSpec: ./prds/prd-[feature-slug]/techspec.md
• Tasks: ./prds/prd-[feature-slug]/tasks/tasks.md
• Bug template: do-execute-qa/assets/bug-template.md
• Bugs output dir: ./prds/prd-[feature-slug]/qa-bugs/bug-[XX]-[severidade-completa]-[slug].md
• QA Report output: ./prds/prd-[feature-slug]/qa-report.md
• Screenshots output dir: ./prds/prd-[feature-slug]/qa-screenshots/