メニュー
Diagnose a failing flyprof command by its error code. Use when any flyprof command returns ok:false / a non-zero exit, to decide whether to stop, fix config, retry, or treat the result as a finding. Maps each error.code to a hard action so you don't loop.
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
Analyze a captured FlyDSL kernel bundle with flyprof: read the roofline/occupancy (counters), tile advice, stall/bubble taxonomy (bubbles), and the ISA<->Python mapping (map). Use after `flyprof capture`, when you need to understand where a kernel spends its stall cycles and how the ISA lines up with the .py source.
Capture a rocprofv3 ATT (Advanced Thread Trace) for a FlyDSL kernel with flyprof, including kernel discovery, tile sizing, and handling empty/out-of-range dispatches. Use when you need to record a kernel's per-instruction trace before analysis, or when `flyprof capture` returned EMPTY_ATT / DISPATCH_OUT_OF_RANGE / NO_KERNEL_DISCOVERED.
Produce and act on a FlyDSL kernel optimization report with flyprof: synthesize the ranked bubble->FlyDSL-knob recommendations, read the ISA<->Python evidence, optionally apply one knob, and verify the change re-profiles better. Use when asked what to change to make a kernel faster, or to turn a captured bundle into an optimization plan.
Start here to profile a FlyDSL kernel on AMD CDNA (gfx950/MI350X). Router for the flyprof CLI: how to run the fixed capture->analyze->report workflow, read its JSON envelopes, and pick the right sub-skill. Use whenever asked to profile/analyze a kernel, find why a kernel is slow, build an optimization report, or capture an ATT trace for a FlyDSL kernel.
SOC 職業分類に基づく
| name | flyprof-triage |
| description | Diagnose a failing flyprof command by its error code. Use when any flyprof command returns ok:false / a non-zero exit, to decide whether to stop, fix config, retry, or treat the result as a finding. Maps each error.code to a hard action so you don't loop. |
| allowed-tools | Bash(flyprof:*), Read |
Every failure is one envelope: {"ok": false, "error": {"code", "exitCode", "message", "help", ...}}. Read the code, take the bound action. Do not retry the same command
hoping for a different result.
| code | exit | action |
|---|---|---|
ROCPROFV3_MISSING | 69 | STOP. rocprofv3 isn't on PATH. Tell the user to install ROCm / fix PATH. Do not retry. |
NO_GPU | 69 | STOP. No GPU visible. Do not retry. |
BUILD_TREE_MISSING | 78 | STOP. No built FlyDSL. Fix --worktree to a checkout with build-fly/python_packages. |
BAD_ARGS | 78 | Fix the argument the message names (e.g. --shape M,N,dtype), then re-run. |
MISSING_PREREQ | 78 | Run the prerequisite command (error.help says which) into the same --bundle, then re-run. |
KERNEL_NOT_FOUND | 66 | The kernel isn't in the worktree. flyprof list to find the right name. Not a bug. |
NO_KERNEL_DISCOVERED | 66 | --stats saw no FlyDSL kernel. The test may not launch one; check error.candidates. Try a real --shape. |
EMPTY_ATT | 66 | All dispatches were empty shells — the grid was too small. Enlarge --shape. A result, not a crash. |
DISPATCH_OUT_OF_RANGE | 66 | Use a dispatch id from error.available. |
NO_ARTIFACT / NO_RECOMMENDATION | 66 | Empty ≠ broken. Likely a valid "nothing here" / "already optimal". Investigate, don't "fix". |
CAPTURE_TIMEOUT | 75 | Transient. Retry once with a bigger --timeout or a smaller --shape. Budget one retry. |
INTERNAL | 70 | A real bug in flyprof. Capture error.trace, report it. Don't loop. |
If capture reports the kernel failed to compile (e.g. a missing fast-dispatch slot),
that is a real result to report, not a signal to retry with tweaks. Surface it and stop.
At most 3 triage rounds for a single goal. If you've fixed config (worktree, shape, prerequisite) twice and still fail, stop and report the last envelope verbatim — don't keep mutating arguments.
