メニュー
Route Jarvis audio responses to a Sonos speaker. Mic stays on Discord/phone — only the output is redirected. Supports per-message routing and a persistent speaker mode that stays active until turned off.
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
SOC 職業分類に基づく
Manage the Kanban task board — create, start, list, and trash tasks from Discord or voice. Wraps the kanban CLI to give Jarvis full board access without opening a browser.
Launch a safe Claude Code subagent development session for a repo. Use when the user wants to start building a feature, write code, or kick off a coding task. Opens an isolated branch with safety guardrails — agents commit freely but cannot push, open PRs, or touch main.
Send a Jarvis-voiced TTS announcement to a Sonos speaker in the house. Uses Chatterbox for voice generation. Use when the user wants to send a spoken message to someone in another room via a Sonos speaker.
Interactive Jarvis Voice installer. Walks through the complete setup from clone to first voice response, including tier selection and skill installation. Use when someone says install Jarvis, set up Jarvis voice, install Jarvis voice, or wants to get the voice bot running.
Interactive voiceprint enrollment for Jarvis Voice. Guides the user through enrolling their voice so only they can command Jarvis. Use when someone says enroll my voice, set up voiceprint, train Jarvis to recognize me, or voice enrollment.
Install and configure Jarvis Voice — a real-time Discord voice assistant for OpenClaw. Speak in a Discord voice channel and your OpenClaw agent responds by voice.
| name | speaker-route |
| description | Route Jarvis audio responses to a Sonos speaker. Mic stays on Discord/phone — only the output is redirected. Supports per-message routing and a persistent speaker mode that stays active until turned off. |
| tier | JARVIS |
| triggers | ["say that on the speaker","play that on the speaker","send that to the speaker","route to speaker","speaker mode on","speaker mode off","switch to kitchen speaker","switch to bedroom speaker","follow me to the kitchen","follow me to the bedroom","play through the speaker","say that downstairs","say that upstairs","stop speaker mode","turn off speaker mode"] |
Discord/phone stays the input. Jarvis's spoken response comes out of whichever Sonos speaker you choose instead of (or in addition to) the phone.
"Say that on the speaker." "Switch to bedroom speaker." "Follow me to the kitchen — speaker mode on." "Speaker mode off." "Play that downstairs."
| User says | Target | sonos-say arg |
|---|---|---|
| "kitchen", "downstairs" | Kitchen Sonos | down |
| "bedroom", "upstairs", "bathroom" | Bedroom Sonos | up |
| "everywhere", "all speakers", "whole house" | Both | all |
| (no location, mode on) | Default (down) | down |
User says "say that on the speaker" or "send that to the bedroom" — route only the current response, then return to normal.
After generating your response text:
sonos-say <target> "<response text>"User says "speaker mode on" or "switch to [speaker]" — all subsequent Jarvis responses also play on that speaker until turned off.
/tmp/jarvis-speaker-mode (e.g. down, up, or all)/tmp/jarvis-speaker-mode, call sonos-say with the response textTo check if speaker mode is active:
cat /tmp/jarvis-speaker-mode 2>/dev/null
Empty or missing = mode off.
User says "speaker mode off" or "stop speaker mode":
rm -f /tmp/jarvis-speaker-mode
Confirm: "Speaker mode off — audio back to Discord only."
When routing to speaker, the response text should be:
Keep the full text response in Discord as usual. The speaker gets a clean spoken version.
sonos-say <up|down|all> "response text"
/tmp/jarvis-speaker-mode — contains: up | down | all
Missing or empty = speaker mode off.
At the start of every response, check if speaker mode is active:
SPEAKER_TARGET=$(cat /tmp/jarvis-speaker-mode 2>/dev/null)
If non-empty, append a sonos-say call after generating your response.