lspeasy-client

description	Documentation site for lspeasy Use when: You are implementing a custom client layer and need the same validation....
name	lspeasy-client

@lspeasy/client

Documentation site for lspeasy

Use @lspeasy/client when you need to build the consumer side of the Language Server Protocol — an editor extension, a CLI analysis tool, a test harness, or any process that speaks to a language server process.

The primary entry point is LSPClient. Construct it with ClientOptions, call connect(transport) to complete the LSP handshake, then use expect<ServerCaps>() to get typed access to capability-aware namespaces (e.g. client.textDocument.hover(params)).

Transport Decision Tree

Stdio (StdioTransport from @lspeasy/core/node) — Use when: spawning the language server as a child process (the canonical editor extension pattern). Zero network overhead; server and client share a lifespan. Failure mode: server process dies silently → stdout EOF fires onClose; pair with HeartbeatMonitor on long-lived processes.

WebSocket (WebSocketTransport from @lspeasy/core) — Use when: the language server runs remotely (CI, container, cloud dev env) or must be browser-accessible. Supports reconnect with exponential back-off. Failure mode: network partition → onError fires without onClose; enable enableReconnect and subscribe to ConnectionHealthTracker events.

TCP (TcpTransport from @lspeasy/core/node) — Use when: you need a persistent local socket and control both ends (e.g. a test harness or a daemon that outlives the client process). Failure mode: port conflict at startup; use mode: 'client' only after confirming the server is listening, or wrap in a retry loop.

DedicatedWorkerTransport (DedicatedWorkerTransport from @lspeasy/core) — Use when: running the language server in a Web Worker for browser isolation. Zero latency (shared memory), no WebSocket overhead. Failure mode: worker uncaught exception terminates silently; subscribe to worker.onerror.

Connection health

Use ConnectionHealthTracker and HeartbeatMonitor to detect silent transport failures. Subscribe to state-change events via ConnectionState.

Dynamic registration

The client handles client/registerCapability and client/unregisterCapability requests from the server automatically, updating the typed namespaces at runtime.

When to Use

Use this skill when:

• You are implementing a custom client layer and need the same validation behaviour that LSPClient uses. Otherwise this is an internal detail. → use CapabilityGuard
• You need to monitor connection liveness → use ConnectionHealthTracker — for example, to show a status indicator, trigger reconnection logic, or surface transport errors to users.
• You need to detect silent transport failures → use HeartbeatMonitor — for example, when the server process dies without closing the socket, leaving the client hanging indefinitely on pending requests.
• You need to await a specific server-to-client notification after triggering a server-side operation → use NotificationWaiter — for example, waiting for textDocument/publishDiagnostics after saving a document.

Do NOT use when:

• The transport already provides its own keep-alive mechanism (e.g. WebSocket ping frames) — adding a heartbeat on top creates redundant round-trips and may interfere with the transport's own timeout logic. (HeartbeatMonitor)
• You need to listen for ongoing notifications (not a one-shot wait) — use LSPClient.onNotification for persistent subscriptions instead. (NotificationWaiter)

API surface: 5 classes, 11 types, 2 enums, 1 constants

NEVER

• NEVER construct CapabilityGuard before the initialize handshake completes. Server capabilities are only known after the InitializeResult is received; instantiating the guard too early will treat all methods as unsupported.
• NEVER register server-to-client handlers for capabilities not declared in the original initialize request — the server may send the corresponding requests, but without the capability declaration the client has no contract to handle them, leading to silent failures or unexpected errors.
• NEVER mutate the object returned by getHealth() — it is a defensive copy but consumers that store a reference and then modify it will see stale state.
• NEVER call setState from outside LSPClient internals. External callers have no knowledge of the full state-transition graph; setting state directly can desync the client's internal bookkeeping from the tracker's reported state.
• NEVER set interval shorter than the typical round-trip latency for your transport — doing so causes constant onUnresponsive callbacks on any non-local transport, triggering spurious reconnects.
• NEVER rely on heartbeat for authentication or access control. The heartbeat only confirms the transport is alive; it carries no identity information.
• NEVER create a NotificationWaiter without setting a timeout — an indefinite wait will leak the waiter permanently if the notification never arrives (e.g. the server suppresses it for certain file types).
• NEVER use NotificationWaiter to wait for notifications that arrive before the waiter is registered. The waiter only sees notifications emitted after start() is called; earlier notifications are silently missed.

Configuration

4 configuration interfaces — see references/config.md for details.

Quick Reference

Client: CapabilityGuard (Validates outgoing client requests and notifications against the server's declared capabilities), ClientCapabilityGuard (Validates that server-to-client handler registrations are backed by client capabilities declared in the initialize request), ConnectionHealthTracker (Tracks connection state transitions and message activity timestamps), HeartbeatMonitor (Runs interval-based heartbeat checks for active transports), NotificationWaiter (Tracks a single wait-for-notification operation and its timeout lifecycle), LSPClient (Typed LSP client that connects to a language server, manages the LSP handshake, and exposes capability-aware request namespaces), InitializeResult (Initialize result from server), CancellableRequest (Return value of LSPClient), NotebookDocumentNamespace(Namespace for sending notebook-document lifecycle notifications to a server),ConnectionHealth(Aggregated connection health snapshot returned byLSPClient), HeartbeatStatus (Snapshot of the current heartbeat monitoring status), StateChangeEvent (Payload emitted when the connection state changes), ConnectionState (Lifecycle state of an LSPClient connection), LSPClient (Constructs an LSPClient instance) types: PartialRequestResult (Result returned by partial-result enabled requests) Transport: Transport (Pluggable communication layer for JSON-RPC message exchange) Logging: Logger (Structured logging interface used throughout lspeasy), LogLevel (Numeric severity levels for filtering log output) Lifecycle: Disposable (Represents a resource that can be explicitly released)

References

Load these on demand — do NOT read all at once:

• When using a class → read references/classes.md for properties, methods, and inheritance
• When defining typed variables or function parameters → read references/types.md
• When using exported constants → read references/variables.md
• When configuring options → read references/config.md for all settings and defaults

Links

• Author: Pradeep Mouli [e-mail] (https://github.com/pradeepmouli)