メニュー
Development reference for Waveshare ESP32-S3-Touch-AMOLED-1.8. Use when working with this device, its AMOLED display (SH8601 QSPI), touch (FT3168), audio (ES8311), power (AXP2101), IMU (QMI8658), or RTC (PCF85063).
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
SOC 職業分類に基づく
Common ESP32-S3 platform reference for all Waveshare devices in this monorepo. Use when working with PlatformIO setup, toolchain, common libraries, or adding a new device.
Development reference for Waveshare ESP32-S3-ePaper-1.54G (200×200 4-color e-paper, ES8311 audio, SHTC3, PCF85063 RTC, battery). Use when working with this device, its e-paper display (EPD_1in54g driver), power rails, audio codec, sensors, deep-sleep, or restoring the factory firmware.
Development reference for Waveshare ESP32-S3-Touch-AMOLED-1.75C (round 1.75" watch form factor). Use when working with this device, its AMOLED display (CO5300 QSPI 466×466), touch (CST9217), audio (ES8311 playback + ES7210 mic-array AEC), power (AXP2101), IMU (QMI8658), or restoring the factory firmware.
Development reference for Guition JC3636K718 (ESP32-S3, round 1.8" 360×360 + encoder + RGB ring). Use when working with this device, its display (ST77916 QSPI), audio chain (PCM5100A DAC + NS4150B amp), 13× WS2812 ring on GPIO 0, encoder, microphone, DRV2605 + LRA haptics, or restoring the factory firmware.
Development reference for Waveshare ESP32-S3-Knob-Touch-LCD-1.8. Use when working with this device, its dual-MCU architecture, display (ST77916 QSPI), touch (CST816), haptics (DRV2605), or audio (PCM5100A).
| name | waveshare-amoled |
| description | Development reference for Waveshare ESP32-S3-Touch-AMOLED-1.8. Use when working with this device, its AMOLED display (SH8601 QSPI), touch (FT3168), audio (ES8311), power (AXP2101), IMU (QMI8658), or RTC (PCF85063). |
| Spec | Value |
|---|---|
| MCU | ESP32-S3R8 — Xtensa dual-core 240 MHz, WiFi + BLE 5 |
| Flash / PSRAM | 16 MB Flash (Quad SPI) / 8 MB PSRAM (Octal SPI) |
| Display | 1.8" AMOLED, 368x448, SH8601 QSPI |
| Touch | FT3168 capacitive, I2C (0x38) |
| Audio | ES8311 codec (I2S + I2C ctrl), speaker + mic, PA on GPIO 46 |
| Power | AXP2101 PMIC, I2C (0x34) — USB 5V / Li-ion |
| IMU | QMI8658 6-axis (accel + gyro), I2C (0x6B) |
| RTC | PCF85063 real-time clock, I2C (0x51) |
| I/O Expander | XCA9554 (TCA9554), I2C (0x20) — LCD ctrl, PMU INT, SD power |
| Storage | MicroSD (SDMMC 1-wire) |
| USB | Type-C, native USB CDC |
| Framework | PlatformIO (ESP-IDF + Arduino) |
| Function | GPIOs | Interface |
|---|---|---|
| Display (SH8601) | CLK:11 D0:4 D1:5 D2:6 D3:7 CS:12 | QSPI |
| Touch (FT3168) | SDA:15 SCL:14 INT:21 | I2C (0x38) |
| Audio (ES8311) | MCK:16 BCK:9 WS:45 DI:10 DO:8 PA:46 | I2S + I2C (0x18) |
| I2C bus | SDA:15 SCL:14 | Shared: touch, PMIC, IMU, RTC, codec, expander |
| SD Card (SDMMC) | CLK:2 CMD:1 D0:3 | SDMMC 1-wire |
| AXP2101 PMIC | via I2C (0x34) | Power management |
| QMI8658 IMU | via I2C (0x6B) | 6-axis accel + gyro |
| PCF85063 RTC | via I2C (0x51) | Real-time clock |
| XCA9554 expander | via I2C (0x20) | LCD ctrl, SD power, PMU INT |
# Build + upload via USB
pio run -t upload
# Monitor serial
pio device monitor -b 115200
For deeper information, consult these files in order:
Convention :
esp32-platform.mdcontains generic ESP32-S3/PlatformIO knowledge.device-hardware.mdcontains everything specific to this Waveshare device.