メニュー
Install and configure Allxon DMS agent on NVIDIA Jetson devices for remote monitoring and management via the Allxon cloud portal. Supports JetPack 4.6+.
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
SOC 職業分類に基づく
| name | allxon-setup |
| description | Install and configure Allxon DMS agent on NVIDIA Jetson devices for remote monitoring and management via the Allxon cloud portal. Supports JetPack 4.6+. |
Allxon is an edge device management solution for remote monitoring and management of Jetson devices via a cloud portal. Installation is a single command.
Hardware: Any NVIDIA Jetson device, OOB Enabler (optional for out-of-band management) Software: JetPack 4.6+, internet connection
Run one phase at a time. After each phase:
[STOP] → stop immediately, consult the failure decision tree[OK] → tell the user "Phase N complete" and proceedcat /etc/nv_tegra_release
Confirm JetPack 4.6 or later. Check internet:
ping -c 2 get.allxon.net
[OK] when JetPack version confirmed and internet works.
[STOP] if JetPack < 4.6 or no internet.
Ask the user: "Do you already have an Allxon DMS account?"
If no:
[OK] when user confirms they have an account.
sudo wget -qO - "https://get.allxon.net/linux/standard" | sudo bash -s
During installation, it will ask whether to install Trend Micro IoT Security (3-month free trial). User can choose Y or N.
Verify agent is running:
systemctl status allxon-dms-agent
[OK] when agent is active/running.
CLI method:
dms-get-pairing-code
Or GUI method: press Ctrl + Shift + B on the Jetson desktop to open the agent window,
then click "Get device pairing code".
[OK] when pairing code is obtained.
[OK] when device appears in the Allxon DMS Portal.
| Symptom | Action |
|---|---|
wget install script fails | Check internet. Verify get.allxon.net is reachable. Try with sudo. |
| Agent not running after install | Run sudo systemctl start allxon-dms-agent. Check logs with journalctl -u allxon-dms-agent. |
| GUI agent doesn't appear | Press Ctrl + Shift + B to start it. Or use CLI dms-get-pairing-code. |
| Pairing code rejected | Ensure device has internet. Regenerate code and try again. |
| Device not showing in portal | Wait 1–2 minutes. Refresh the portal page. Check agent status. |
sudo systemctl disable dms-install.service
sudo wget -qO - "https://get.allxon.net/linux/uninstall" | sudo bash -s
references/source.body.md — Original Seeed wiki with screenshots and wiring diagramsInstall NVIDIA-optimized PyTorch with CUDA support on reComputer Jetson devices, covering JetPack 5.x and JetPack 6.x workflows, cuSPARSELt setup, torch/torchvision pairing, probing multiple Python or conda targets, and managing multiple PyTorch versions with Miniconda.
Deploy a local AI NVR (Network Video Recorder) on Jetson Orin using NVIDIA VST and Jetson Platform Services with DeepStream pedestrian detection. Requires Jetson Orin with JetPack 6.0 and an IP camera.
Perform over-the-air JetPack/L4T updates on Jetson devices using Allxon DMS Portal. Covers OTA payload generation, upload, and fleet distribution. Requires Ubuntu host PC and Allxon DMS agent.
Set up the alwaysAI computer vision platform to deploy ML-based object detection on Jetson devices. Supports live camera and video file inference with TensorRT acceleration. Requires JetPack 4.6 and a host PC.
Backup and restore a reComputer Jetson system image using the L4T backup/restore script. Requires Ubuntu host, USB-C cable, and the matching JetPack BSP package.
Build Seeed's custom BSP source code for Jetson devices — obtain NVIDIA L4T, overlay Seeed patches, compile kernel, and flash. Requires Ubuntu 20.04/22.04 host PC.