メニュー
Use when capturing SEGGER RTT over ST-Link via memory polling, or when implementing and diagnosing strtt-style RTT control-block scanning and ring-buffer polling.
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
SOC 職業分類に基づく
Use when acquiring STM32 runtime data from global symbols, memory regions, stack-published local slots, or RTT channels and converting captures into structured artifacts for analysis.
Use when debugging STM32 applications with J-Link or ST-Link, including breakpoints, watchpoints, register or memory inspection, HardFault analysis, and automated fault-context capture.
Use when flashing STM32 firmware, verifying flash results, diagnosing download failures, or running repeatable CLI-based flash workflows.
Use when building a closed STM32-to-Matlab workflow for J-Link HSS data capture, system identification, PID/LQR/MPC tuning, Kalman parameter estimation, or Matlab/Simulink code-generation feedback loops.
Use when preparing, auditing, repairing, or launching SEGGER Ozone STM32 debug projects (.jdebug / .jdebug.user). Trigger this skill when Ozone shows stale Windows paths, wrong ELF/SVD/device/interface settings, missing FreeRTOS awareness, duplicated case-variant project files, stale fixed J-Link serial bindings, or when a user wants a ready-to-debug Ozone session opened from the current STM32 project.
Use when capturing STM32 RTT output through the current J-Link mainline, validating runtime behavior after flash/reset, or collecting short runtime evidence from J-Link RTT channels.
| name | bfd-strtt-rtt |
| description | Use when capturing SEGGER RTT over ST-Link via memory polling, or when implementing and diagnosing strtt-style RTT control-block scanning and ring-buffer polling. |
Use this skill for polling-based ST-Link RTT workflows inspired by strtt. This skill is independent from J-Link RTT and independent from J-Link HSS.
python3 ./.codex/skills/bfd-project-init/scripts/bootstrap.py --project-root . --mode check
python3 BFD-Kit/scripts/bfd_stlink_rtt.py \
--elf "${STM32_ELF}" \
--role boot \
--duration 5 \
--output logs/rtt/stlink_rtt.log
_SEGGER_RTT from ELF when possible.STM32_RTT_SCAN_WINDOW for "SEGGER RTT".SEGGER_RTT_CB and buffer descriptors.RdOff after host-side consumption.bfd-data-acquisition.bfd-rtt-logger for native J-Link RTT instead of this skill.bfd-rtt-loggerbfd-stlink-interfacebfd-data-acquisition