| name | component-honglitronic-hl-am-2835h421w-s1-08-hr3 |
| description | Resolve the exact Honglitronic HL-AM-2835H421W-S1-08-HR3 LED and subordinate FOJAN FRC2512F33R0TS ballast resistor used on Board L. Use for polarity, optical bins, current/voltage limits, thermal/reflow constraints, branch sharing, and resistor stress. |
Board L LED string and ballast
Run the central validator and read every local JSON file before using these records. Official primary specifications support the Honglitronic base-MPN LED limits and the exact FOJAN order code and ballast ratings. Available LCSC JSON-LD confirms only the C210315-to-exact-MPN/2800–3100 K/3000 K distributor identity; the bare MPN spans multiple CCT rows. Incoming reel/label/bin acceptance and real eight-branch current sharing remain open.
The LED drawing defines pad 2 as anode and pad 1 as cathode. Exact 3000 K output is 27 lm minimum / 29 lm typical at 60 mA, with Ra at least 80 and forward voltage 2.6 to 3.2 V. Absolute maxima are not operating targets. Follow the assembly section's maximum two reflow cycles; a reliability-test condition mentioning three cycles is not process authorization.
Board L has eight parallel branches, each one 33 ohm ballast followed by three series LEDs. Do not infer total current or current sharing without the driver state, supply waveform, LED bin/Vf distribution, resistor tolerance/temperature, thermal coupling, PWM duty, layout and bench data. An open LED removes its branch; a short or unequal heating redistributes stress. Use the included nominal 60 mA calculations only as arithmetic context, not proof of the design operating point.
Human component reference
Human projection of this bundle: rec-c210315, rec-c2934070. Those pages are generated from the JSON files here and add nothing to them — where the two disagree, this bundle is correct. See also the component catalog and the cross-component rules.
