electronics

name	electronics
description	Electronics Educational Pack — routes queries to 15 modules covering Ohm's law through PCB design
triggers	["electronics","circuit","voltage","current","resistor","capacitor","inductor","amplifier","transistor","diode","op-amp","digital logic","PCB","power supply","microcontroller","sensor","DSP","filter","ADC","DAC"]

Electronics Educational Pack

Comprehensive electronics curriculum grounded in The Art of Electronics (Horowitz & Hill, 3rd ed., 2015). Covers 15 modules across 4 tiers, from Ohm's law through PCB design, with interactive labs powered by MNA circuit simulation and digital logic simulation.

Routing

Given a user topic, this skill routes to the appropriate module by matching trigger keywords against the 14 domain skills defined in chipset.yaml.

routeToModule(topic: string): string | null

Accepts a topic string (user query or keyword) and returns the target module directory name, or null if no match is found.

Algorithm:

1. Normalize the topic string (lowercase, trim whitespace)
2. Match against each skill's triggers array from chipset.yaml
3. If multiple skills match, prefer the most specific match (longest matching trigger string)
4. Return the matched skill's module field (e.g., "01-the-circuit")
5. For industrial-and-applied (multi-module skill), return the best-fit module from [13-plc, 14-off-grid-power, 15-pcb-design] based on the specific trigger matched
6. If no trigger matches, return null

Keyword-to-Module Routing Table:

Keyword	Module	Skill
voltage, current, resistance, ohm, kirchhoff, power, series, parallel, divider	01-the-circuit	circuit-fundamentals
capacitor, inductor, RC, RL, RLC, filter, resonance, thevenin, norton, impedance	02-passive-components	passive-components
AC, frequency, bode, decibel, dB, noise, signal, coupling, spectrum, waveform	03-the-signal	signal-analysis
diode, rectifier, zener, LED, shockley, clamping, bridge, I-V curve	04-diodes	diode-circuits
transistor, BJT, MOSFET, amplifier, common-emitter, emitter-follower, current-mirror, beta, gain	05-transistors	transistor-circuits
op-amp, operational amplifier, inverting, non-inverting, integrator, differentiator, comparator, golden rules, active filter	06-op-amps	op-amp-circuits
power supply, regulator, buck, boost, switching, linear, 7805, LDO, ripple, thermal, battery	07-power-supplies	power-supply-design
logic gate, boolean, AND, OR, NOT, NAND, NOR, XOR, CMOS, truth table, K-map, de morgan	07a-logic-gates	logic-gate-design
flip-flop, counter, register, state machine, clock, latch, moore, mealy, SRAM, memory	08-sequential-logic	sequential-logic
ADC, DAC, sampling, nyquist, quantization, R-2R, SAR, sigma-delta, aliasing	09-data-conversion	data-conversion
DSP, FIR, IIR, FFT, DFT, filter design, convolution, windowing, fixed-point	10-dsp	dsp-fundamentals
microcontroller, MCU, GPIO, UART, SPI, I2C, interrupt, PWM, Arduino, ESP32	11-microcontrollers	microcontroller-systems
sensor, actuator, Wheatstone, H-bridge, stepper, thermocouple, optocoupler, strain gauge, instrumentation amplifier	12-sensors-actuators	sensor-actuator-systems
PLC, ladder logic, off-grid, solar, MPPT, PCB, layout, Gerber, PID, Modbus, NEC	13-plc / 14-off-grid-power / 15-pcb-design	industrial-and-applied

Modules

#	Module	Tier	Topics
1	The Circuit	1	V, I, R, Ohm's law, KVL/KCL, voltage dividers, power
2	Passive Components	1	Capacitors, inductors, RC/RL/RLC, filters, Thevenin/Norton
3	The Signal	1	AC, frequency response, Bode plots, dB, noise
4	Diodes	2	I-V curves, rectification, Zener, LEDs, Shockley equation
5	Transistors	2	BJT, MOSFET, amplifiers, common-emitter, current mirrors
6	Op-Amps	2	Golden rules, inverting/non-inverting, active filters, integrators
7	Power Supplies	2	Linear/switching regulators, buck/boost, LDO, thermal
7A	Logic Gates	3	Boolean algebra, CMOS, truth tables, K-maps, De Morgan's
8	Sequential Logic	3	Flip-flops, counters, state machines, registers, memory
9	Data Conversion	3	ADC/DAC, sampling, Nyquist, quantization, aliasing
10	DSP	3	FIR/IIR, FFT/DFT, convolution, windowing, fixed-point
11	Microcontrollers	4	MCU, GPIO, UART/SPI/I2C, interrupts, PWM
12	Sensors & Actuators	4	Wheatstone, H-bridge, stepper, thermocouples, inst. amps
13	PLC	4	Ladder logic, PID, structured text, Modbus, IEC 61131-3
14	Off-Grid Power	4	Solar PV, MPPT, batteries, charge controllers, NEC
15	PCB Design	4	Layout, design rules, EMI, Gerber files, soldering

Learning Progression

The curriculum follows a 4-tier pipeline, where each tier builds on the previous:

Tier 1 (Foundations) -- Modules 1-3 Voltage, current, resistance, passive components, and AC signals. No active devices. All labs use passive circuits only. Safety: Annotate mode.

Tier 2 (Active Devices) -- Modules 4-7 Semiconductors (diodes, transistors), op-amps, and power supplies. Introduces nonlinear behavior and active circuit design. Safety: Gate mode for higher voltages.

Tier 3 (Digital & Mixed-Signal) -- Modules 7A, 8, 9, 10 Logic gates, sequential circuits, data conversion, and DSP. Bridges analog and digital domains. Safety: Annotate (logic) to Gate (mixed-signal).

Tier 4 (Applied Systems) -- Modules 11-15 Microcontrollers, sensors, PLCs, off-grid power, and PCB design. Real-world applications combining all previous tiers. Safety: Gate to Redirect mode for industrial/high-voltage.

Configuration

See chipset.yaml for detailed skill triggers, agent assignments, and pipeline topology. See metadata.yaml for pack identity, version, and tier structure. See references/bibliography.md for H&H citation conventions. See references/hh-chapter-map.md for chapter-to-module mapping.