sniper-review

name	sniper-review
description	Manually trigger a review gate for the current phase
arguments	[{"name":"phase","description":"Phase to review (defaults to current phase from live-status)","required":false}]

/sniper-review

Manually trigger a quality gate review. Use this when you want to run gate checks outside of the normal protocol flow.

Process

1. Determine Phase

• If --phase is specified, use it
• Otherwise, read .sniper/live-status.yaml for the current phase
• If no active phase, ask the user which phase checklist to run

2. Load Checklist

Read the checklist from .sniper/checklists/<phase>.yaml (or from .claude/ if scaffolded there).

3. Run Checks

Spawn a gate-reviewer agent to execute the checklist:

• Use the Task tool with the gate-reviewer agent definition
• Pass the checklist path and phase name
• Wait for the gate result

4. Present Results

Display the gate result:

• Overall: PASS or FAIL
• Each check with status and any output
• Blocking failures highlighted
• Suggestions for fixing failures

5. Write Result

Save the gate result to .sniper/gates/<phase>-<timestamp>.yaml.

6. Capture Feedback

If the gate fails and the user provides feedback on what should change:

1. Parse the feedback for actionable, generalizable patterns
2. If the feedback describes a pattern (not a one-off fix):
   • Create a learning with source.type: human, confidence: 0.9
   • Scope to the reviewed phase and relevant agents
   • Write to .sniper/memory/learnings/
3. Note: "Learning {id} captured from review feedback."

Rules

• This is a manual trigger — it does NOT advance the protocol phase
• Always write results to .sniper/gates/ for audit trail
• If checks reference commands that don't exist in config, skip with a warning