| name | graph-macro |
| description | Drive the ZenUML Graph (DrawIO) macro through any entry point — slash-menu insert, in-editor Edit, copy-then-edit fallback, or view-mode Edit — and into the inner DrawIO editor to append a timestamp shape and Publish. Classifies the save outcome as success or did-not-persist, and records whether the paywall was observed. Use whenever you need to verify a Graph macro insert / edit / save end-to-end via Playwright MCP without re-deriving the Forge → DrawIO iframe chain. Triggers on "insert graph macro", "edit graph macro", "publish graph", "spot check drawio publish", "test graph save", "verify graph publish on lite", or any ad-hoc Graph-macro MCP spot check on lite-stg / full-stg / dia-stg / zenuml-stg / prod. |
Graph (DrawIO) macro — MCP-driven spot-check playbook
A single, MCP-readable playbook that takes you from "Confluence page open in Chrome" to "Graph macro inserted or edited, Publish attempted, outcome classified." Avoids re-deriving the Forge → DrawIO iframe chain, the slash-menu keystroke trap, the paywall placement, and the metered continue-attempts semantics — each is captured inline below with a code citation so you can trust the why, not just the what.
When to use this skill vs an adjacent one
| If you need to … | Use |
|---|
| Spot-check the Graph macro insert / edit / publish flow via MCP | this skill |
| Edit a non-Graph macro (no DrawIO inner iframe) | /edit-macro |
| Verify the cross-page-copy writeback behaviour specifically | /copy-macro |
| Run release-gating validation (not ad-hoc) | /pvt-drawio or /pvt-edit |
| Set up a fresh page from scratch (login + page creation) | /smoke-test, then come back to this skill |
This skill is variant-agnostic. It reports observations; the caller (you) interprets the result against the variant under test using the table in the final section.
Preconditions
- Chrome already logged in to a Confluence site.
- A Confluence page URL is open in the active Chrome tab (view or edit mode is fine — the skill clicks Confluence's page-level Edit button itself if Insert is needed and the page is in view mode).
- Playwright MCP tools (
mcp__playwright__*) available.
You do not need to specify a variant. Drive whichever site is open; interpret the report at the end.
Selector inventory (referenced throughout)
| Element | Selector |
|---|
| Forge editor modal | [data-testid="custom-ui-modal-dialog"] |
| Forge app iframe inside the modal | [data-testid="hosted-resources-iframe"] |
| Inner DrawIO iframe | nested iframe reached via the Playwright locator chain — never page.frames().find() (URL-match is fragile across drawio/editor vs drawio/editor.html) |
| Macro extension wrap (in Edit Mode) | .extensionView-content-wrap |
| Confluence native macro pencil / edit toolbar (Edit Mode fallback) | TBD — pin on first run by inspecting the floating selection toolbar that appears after clicking a macro in the page editor, then update this table |
| Paywall "Continue editing" button | [data-testid="continue-editing-btn"] (defined in src/components/UpgradePrompt/UpgradePrompt.vue:51) |
The TBD is acceptable slack — pin it the first time this skill drives a page with our Edit button blocked, and record the verified selector here in-place.
Entry-point decision tree
Pick the entry section by looking at the page's current state. Do not ask the caller; observe.
What's on the page?
├── No Graph macro yet
│ └── Section A: Insert via slash menu
│ (requires page in Edit Mode; if currently in View Mode,
│ click Confluence's page-level Edit button first and wait
│ for the editor toolbar)
│
└── Graph macro already on page
├── Page in View Mode → Section E3: click our viewer's Edit button
│
└── Page in Edit Mode → Section E1 with E2 auto-fallback:
├── Try E1: click our viewer's Edit button (short timeout ≤ 3 s)
└── If E1 not clickable → E2: click Confluence's native macro
pencil / edit toolbar button
(E2 is the documented fallback for just-copied macros —
see /copy-macro)
All entry sections converge on the same postcondition: the Forge editor modal [data-testid="custom-ui-modal-dialog"] is open. Section C runs from there.
Record entry_path_used in the final report (A, E1, E2, or E3) so spot checks investigating copy-related bugs can verify they hit the expected path.
Section A — Insert via slash menu
Preconditions: page in Edit Mode. If currently in View Mode, click Confluence's page-level Edit button and wait until the editor toolbar mounts before continuing.
Steps:
-
Click in the page body to position the cursor.
-
Type / then graph using mcp__playwright__browser_press_key (or browser_type one character at a time).
Keystroke trap: ProseMirror (Confluence's editor) watches input events. mcp__playwright__browser_fill_form bypasses those events and the slash menu never opens. Use real keystrokes.
-
Wait for the slash menu to render the Graph option, then click "Graph (DrawIO)" specifically. Do not pick any other Graph-named option.
-
Wait for [data-testid="custom-ui-modal-dialog"] to appear.
Convergence: Forge modal is open. Proceed to Section C.
Section E1 + E2 — Edit in page Edit Mode (auto-fallback)
Documented as one section with two steps so the fallback is intrinsic, not an indirection.
Preconditions: page in Edit Mode, Graph macro already present on the page.
Step E1 (preferred)
- Drill to our viewer iframe:
.extensionView-content-wrap → [data-testid="hosted-resources-iframe"] → our viewer.
- Inside that iframe, locate our viewer toolbar's Edit button.
- Click with a short timeout (≤ 3 s) — this is a clickability probe, not a long wait.
- If
[data-testid="custom-ui-modal-dialog"] appears → record entry_path_used = E1, proceed to Section C.
- If the click times out or has no effect → fall through to E2. Do not retry E1.
Step E2 (fallback — just-copied-macro path)
- Click the
.extensionView-content-wrap once to select the macro in the page editor.
- Confluence renders a floating selection toolbar with a pencil / edit icon — its own native affordance, distinct from our app.
- Click that pencil / edit icon (selector TBD on first run — update the selector inventory once pinned).
- Wait for
[data-testid="custom-ui-modal-dialog"]. Record entry_path_used = E2.
Why the fallback exists: Our Edit button is not clickable immediately after Confluence's copy operation — see /copy-macro for the underlying writeback race. Always fall through to E2 if E1 doesn't respond within ~3 s; do not retry E1 with longer timeouts.
Convergence: Forge modal is open. Proceed to Section C.
Section E3 — Edit in View Mode
Preconditions: page in View Mode (do not click Confluence's page Edit button), Graph macro already rendered.
Steps:
- Locate our viewer iframe directly. In View Mode there is no
.extensionView-content-wrap envelope — the chain is shorter than in Edit Mode.
- Find the Edit button on the viewer toolbar.
- Click it; wait for
[data-testid="custom-ui-modal-dialog"]. Record entry_path_used = E3.
E2 is not available in View Mode — Confluence's native macro toolbar only appears inside the page editor. Our Edit button is generally more reliably clickable here than in E1 because there is no editor-mount race.
Convergence: Forge modal is open. Proceed to Section C.
Section C — Shared in-editor tail
Runs after any of A / E1 / E2 / E3 leaves [data-testid="custom-ui-modal-dialog"] open. Six steps: C0 paywall check, C1 drill, C2 timestamp, C3 publish, C4 outcome watcher, C5 report.
C0 — Paywall check (immediately after editor opens)
The paywall fires at editor entry, not at Publish. Handle it before drilling.
- Inside the Forge iframe, check for
[data-testid="continue-editing-btn"] with a short timeout (~2 s — the overlay mounts synchronously with the editor).
- If present (
paywall_observed = yes):
- Capture the most recent
paywall_triggered event from api.mixpanel.com to record action_type (page_editor for edit-blocked, page_editor_create for create-blocked). The skill only drives the editor surface, so fullscreen_viewer should never appear here — if it does, flag it as an anomaly in the report.
- Click
[data-testid="continue-editing-btn"] (this emits PAYWALL_CONTINUED_EDITING per src/components/UpgradePrompt/UpgradePrompt.vue:110).
- Wait for
[data-testid="continue-editing-btn"] to disappear.
- If absent: record
paywall_observed = no and proceed.
Why paywall belongs here, not at Publish: src/utils/paywall/mountPaywallGate.ts (tryPageEditorPaywall) runs synchronously during the editor's mount path — the gate is the modal at editor entry, never a save-time check. The Lite paywall is a metered soft-paywall: each "Continue editing without upgrading (N)" click decrements a localStorage counter (DEFAULT_CONTINUE_ATTEMPTS = 15, key paywallContinueAttempts:<domain>:<space>:<user>), and during that grace window saves succeed by design — saveToPlatform deliberately has no shouldBlockActions check. At N=0 the Continue button is replaced by the non-clickable "Request extension to continue editing" span ([data-testid="continue-attempts-exhausted"]), so the user never reaches the editor at all: blocking happens at the modal, not at Publish. If C0 finds that exhausted state instead of continue-editing-btn, record it and stop the run there — that is the intended lockout. (Some code comments still describe a persistence-layer save gate; that wording is misleading — ignore it. Canonical model: CLAUDE.md § "How the Lite paywall actually enforces".)
Dismiss only via the button, not the backdrop. Backdrop click fires MODAL_DISMISSED instead of PAYWALL_CONTINUED_EDITING, which would skew the continued-editing rate the team tracks.
C1 — Drill outer → inner DrawIO iframe
- From
[data-testid="custom-ui-modal-dialog"], locate [data-testid="hosted-resources-iframe"] (Forge app iframe).
- Inside that iframe, locate the nested inner DrawIO iframe via Playwright locator chain.
Both drawio/editor and drawio/editor.html appear in different builds. page.frames().find() URL-matching can pick the wrong frame. Use the locator chain instead.
C2 — Append a timestamp text shape (without overwriting)
The goal of this step is to make the published result observable (you can see when the spot check ran) and non-destructive (existing canvas content untouched).
Timestamp content: edit-test YYYY-MM-DD HH:mm UTC — for example edit-test 2026-05-24 10:23 UTC. The edit-test prefix is a recognisable marker for grep / future debugging; UTC keeps it sortable and unambiguous.
Primary mechanism (UI-driven):
- Double-click an empty area near the canvas top-left (offset
(20, 20) is safe for most diagrams).
- DrawIO's shape picker opens → type
text → press Enter to place a text shape.
- Type the timestamp content.
- Press Escape to commit.
Fallback mechanism (API-driven, use if primary is flaky against the deployed DrawIO build):
Use mcp__playwright__browser_evaluate inside the inner DrawIO iframe to call mxGraph's editorUi.editor.graph.insertVertex(...) directly. More invasive but bypasses UI-version drift in DrawIO's shape picker.
Don't click on or near existing shapes — that may select / modify them. The top-left margin works as a default; if the diagram has content there, pick another empty spot but never overlap existing geometry.
C3 — Click Publish in the inner DrawIO frame
The trap that costs everyone time: Publish lives in the inner DrawIO frame, not the outer Forge modal. The Forge modal chrome does not own that button. This is the same for Connect and Forge; do not search the outer modal for Publish. Verified in tests/e2e-tests/helpers/MacroFlowHelper.ts (clickEditorPublish(page, { nested: 'drawio' })).
Click Publish inside the inner DrawIO iframe drilled in C1.
C4 — Watch for save completion (single watcher)
Wait up to 15 s for two things together:
[data-testid="custom-ui-modal-dialog"] disappears, AND- Our viewer iframe re-renders with the new timestamp shape visible.
| Result | Classification |
|---|
| Both happen within 15 s | outcome = success |
| Timeout | outcome = did-not-persist |
There is no second paywall watcher at this step — the paywall has already been observed (or not) in C0, and it never gates the save itself. Once "Continue editing" was clicked in C0, the metered grace window applies and the save is expected to persist — even on a paywalled Lite space.
outcome = did-not-persist is therefore always a real failure to investigate, regardless of paywall_observed. Capture mcp__playwright__browser_console_messages for the report.
C5 — Structured report
Emit this exact shape so the caller can interpret without follow-up questions:
Outcome: <success | did-not-persist>
Entry path used: <A | E1 | E2 | E3>
Timestamp injected: edit-test YYYY-MM-DD HH:mm UTC
Time to outcome: <Ns>
Paywall observed: <yes | no>
action_type: <page_editor | page_editor_create> (only if yes; fullscreen_viewer here = anomaly)
Console errors (whenever outcome = did-not-persist — a non-persisting save is always a real failure):
[<error 1>, <error 2>, …]
Caller-side interpretation hints
| Variant under test | Expected pattern |
|---|
| Lite (paywalled space, Continue clicked in C0) | paywall_observed = yes + outcome = success — saves persist during the metered grace window by design; this is NOT a broken gate |
| Lite (paywalled space, continue attempts exhausted, N=0) | Run stops at C0: the modal shows the non-clickable "Request extension to continue editing" (continue-attempts-exhausted) and the editor is unreachable. Blocking happens at the modal, never at save time. |
| Lite (non-paywalled space) | paywall_observed = no + outcome = success |
| Full / Diagramly | paywall_observed = no + outcome = success |
| Suspect — investigate | outcome = did-not-persist in ANY combination — a save that doesn't persist is never the expected paywall behaviour; read the console errors. Also investigate paywall_observed = yes on Full/Diagramly (paywall is Lite-only). |
If action_type = fullscreen_viewer shows up in the report, that's also an anomaly — this skill only ever drives the editor surface, so the fullscreen-viewer paywall path should never be hit here.
