godot-remote-executor

name

godot-remote-executor

description

Execute GDScript code on a running Godot editor or game runtime via the Hastur broker-server HTTP API. Use this skill whenever the user wants to manipulate a Godot editor or running game remotely — creating/modifying scenes, adjusting node properties, running editor operations, inspecting project state, querying live game runtime state (scene tree, physics, FPS, input, variables), or any task that requires interacting with a live Godot instance. The broker-server supports two executor types: "editor" (the editor plugin) and "game" (a GameExecutor autoload running in the game process). Target the game runtime by specifying `type: "game"` in execute requests. Trigger this skill when the user mentions Godot, Godot editor, GDScript execution, scene manipulation, node operations, game runtime inspection, live game state, or any task involving controlling a Godot project remotely, even if they don't explicitly mention "broker" or "remote execution." Also use when the user asks to inspect, query, or modify anything in their Godot project while the editor or game is running.

Godot Remote Executor

This skill enables you to execute arbitrary GDScript code on a running Godot editor or game runtime instance through the Hastur broker-server. The broker-server acts as a bridge: you send HTTP requests to it, and it forwards the code to a connected Hastur Executor (editor plugin or game runtime) via TCP.

Executors have a type field: "editor" for the editor plugin, "game" for the GameExecutor autoload running in the game process. Use type: "game" to target the live game runtime — useful for inspecting runtime state, scene tree, physics, FPS, input, and variables during gameplay.

Prerequisites

Before you begin, you need two things from the user:

1. Auth token — The broker-server requires a Bearer token for authentication. Ask the user for it if not provided. It was printed to stdout when the broker-server started.
2. Base URL — Defaults to http://localhost:5302. The user may specify a different host/port.

Store these for the duration of the conversation:

• HASTUR_AUTH_TOKEN — the Bearer token
• HASTUR_BASE_URL — defaults to http://localhost:5302

Step 0: Read GDScript Syntax Reference (Critical)

Before writing any GDScript code, read the GDScript syntax reference to avoid compilation errors. GDScript has Python-like indentation-based syntax but significant differences in typing, built-in types, and conventions.

Read this file first:

• references/gdscript-syntax/gdscript_basics.rst.txt — The core language reference (~2900 lines). Covers syntax, types, control flow, functions, classes, signals, exports, and all language constructs.

This is the single most important thing you can do to reduce errors. GDScript has many subtle differences from Python:

• Uses := for type inference (not :)
• var x: int for typed variables
• func not def
• Indentation matters (tabs, not spaces)
• @onready, @export, @tool annotations
• Built-in types: Vector2, Vector3, Color, Dictionary, Array, etc.
• String formatting with % operator or format() method
• match instead of switch
• No list comprehensions (use Array.map() / Array.filter())
• for x in range(n) or for x in array
• Signals declared with signal keyword
• preload() and load() for resources

For @GDScript built-in functions and annotations, read:

• references/gdscript-syntax/[e-mail] — @GDScript annotation and function reference

For global scope functions (print, push_error, etc.), read:

• references/gdscript-syntax/[e-mail] — @GlobalScope constants and functions

For code style conventions, read:

• references/gdscript-syntax/gdscript_styleguide.rst.txt — official style guide

Step 1: Discover Connected Executors

First, check which Godot executors are connected to the broker-server. Run:

curl -s -H "Authorization: Bearer HASTUR_AUTH_TOKEN" HASTUR_BASE_URL/api/executors

The response looks like:

{
  "success": true,
  "data": [
    {
      "id": "a1b2c3d4-e5f6-7890-abcd-ef1234567890",
      "project_name": "my-game",
      "project_path": "C:/Users/dev/projects/my-game",
      "editor_pid": 12345,
      "plugin_version": "0.1",
      "editor_version": "4.6.0",
      "supported_languages": ["gdscript"],
      "connected_at": "2026-03-28T10:00:00.000Z",
      "status": "connected",
      "type": "editor"
    },
    {
      "id": "b2c3d4e5-f6a7-8901-bcde-f12345678901",
      "project_name": "my-game",
      "project_path": "C:/Users/dev/projects/my-game",
      "editor_pid": 67890,
      "plugin_version": "0.1",
      "editor_version": "4.6.0",
      "supported_languages": ["gdscript"],
      "connected_at": "2026-03-28T10:01:00.000Z",
      "status": "connected",
      "type": "game"
    }
  ]
}

Each executor has a type field: "editor" or "game". Note the id and type for targeting specific executors.

Step 1.5: Game Runtime Not Available — Auto-Recovery

When the user's task requires targeting the game runtime (type: "game") but no game executor appears in /api/executors, and an editor executor is connected, follow this recovery flow before reporting failure. This is a common situation — the user simply hasn't started the game or hasn't added the GameExecutor autoload yet.

Recovery Steps

1. Check if the game is currently running — Execute code on the editor to inspect the game process state:

var ei = executeContext.editor_plugin.get_editor_interface()
var is_playing = ei.is_playing_scene()
executeContext.output("is_playing", str(is_playing))

2. Check if game_executor.gd is registered as an Autoload — Read the [autoload] section from the project's project.godot file. There is no runtime API to list registered autoloads. The project.godot file is located at the project root and contains autoload entries like:

[autoload]

GameExecutor="*uid://7yjc3ixh2laf"

Look for an entry containing game_executor or GameExecutor.

3. Ask the user before taking action — Based on the diagnostics above:

• If the game is not running AND the autoload is missing: Tell the user both issues and ask what they'd like to do:

  "No game runtime is connected. The game is not currently running, and game_executor.gd is not registered as an Autoload. Would you like me to:\n1. Add game_executor.gd as an Autoload and then start the game\n2. Just add the Autoload (you'll start the game yourself)\n3. Just start the game (but it won't connect without the Autoload)"

• If the game is not running but the autoload IS configured: Ask:

  "No game runtime is connected. The GameExecutor autoload is configured, but the game isn't running. Would you like me to start the game from the editor?"

• If the game IS running but no game executor appeared: The game might still be starting up. Wait a few seconds and re-check /api/executors. If it still doesn't appear, the autoload might be missing — ask the user:

  "The game appears to be running but no game executor connected. The GameExecutor autoload may not be registered. Would you like me to add it to the project settings? (You'll need to restart the game afterwards.)"

4. Execute user-approved actions — Only after the user confirms:

• To add an Autoload, use executeContext.editor_plugin.add_autoload_singleton(). For example, to add GameExecutor:

  executeContext.editor_plugin.add_autoload_singleton("GameExecutor", "res://addons/hasturoperationgd/game_executor.gd")
  executeContext.output("result", "done")
  

• To remove an Autoload, use executeContext.editor_plugin.remove_autoload_singleton(). For example, to remove GameExecutor:

  executeContext.editor_plugin.remove_autoload_singleton("GameExecutor")
  executeContext.output("result", "done")
  

  Both methods update project.godot automatically. No need to manually modify project settings or call ProjectSettings.save().

• To start the game, execute on the editor:

  var ei = executeContext.editor_plugin.get_editor_interface()
  ei.play_main_scene()
  

  Or trigger via the menu bar's Debug menu if more control is needed.

  • To stop the game:

  var ei = executeContext.editor_plugin.get_editor_interface()
  ei.stop_playing_scene()
  

Important: Always Ask First

Never start the game or modify project settings without the user's explicit approval. These are significant actions that can disrupt the user's workflow. Present the situation clearly and let the user decide.

Step 2: Execute Code

Send GDScript code to a connected editor via POST request:

curl -s -X POST \
  -H "Authorization: Bearer HASTUR_AUTH_TOKEN" \
  -H "Content-Type: application/json" \
  -d '{"code": "<GDScript code here>", "executor_id": "<executor id>"}' \
  HASTUR_BASE_URL/api/execute

Targeting an Executor

You can identify the target executor in three ways (provide exactly one):

• executor_id — exact match, most reliable
• project_name — fuzzy substring match on the project name
• project_path — fuzzy substring match on the project path

When only one executor is connected, project_name is convenient. When multiple executors are connected, use executor_id to be precise.

Filtering by Type

Add "type": "editor" or "type": "game" to the request body to restrict the executor search to a specific type:

curl -s -X POST \
  -H "Authorization: Bearer HASTUR_AUTH_TOKEN" \
  -H "Content-Type: application/json" \
  -d '{"code": "executeContext.output(\"fps\", str(Engine.get_frames_per_second()))", "project_name": "my-game", "type": "game"}' \
  HASTUR_BASE_URL/api/execute

This is useful when both an editor and a game executor are connected for the same project — use type: "game" to target the live game process, or type: "editor" to target the editor.

Execution Modes

The Hastur Executor supports two modes (for both editor and game executors), determined automatically by whether the code contains extends:

Snippet mode (no extends keyword): Code is automatically wrapped in a @tool extends RefCounted class with a run() method. The executeContext variable is available as an ExecutionContext object with an output(key, value) method for returning structured results.

var node = get_tree().current_scene
executeContext.output("scene_name", node.name)
executeContext.output("child_count", str(node.get_child_count()))

Full class mode (contains extends keyword): Code must define a func execute(executeContext): method. Useful when you need to extend a specific type.

extends Node

func execute(executeContext):
    var root = get_tree().root
    executeContext.output("viewport_size", str(root.get_visible_rect().size))

Understanding the Response

{
  "success": true,
  "data": {
    "request_id": "uuid",
    "compile_success": true,
    "compile_error": "",
    "run_success": true,
    "run_error": "",
    "outputs": [["key1", "value1"], ["key2", "value2"]]
  }
}

• compile_success — whether the code compiled
• compile_error — error message if compilation failed
• run_success — whether the code ran without errors
• run_error — runtime error message
• outputs — array of [key, value] pairs collected via executeContext.output()

Step 3: Handle Errors

Compilation Errors

If compile_success is false, read the compile_error message. Common causes:

• Syntax errors (wrong indentation, missing colons, Python-style syntax that doesn't work in GDScript)
• Type mismatches
• Undefined variables or functions

Re-read the GDScript syntax reference if you encounter repeated compilation errors. The most common mistakes are:

• Using spaces instead of tabs for indentation
• Using def instead of func
• Using Python-style string formatting (f"...") instead of GDScript's %s or format()
• Using True/False instead of true/false
• Using None instead of null
• Forgetting : after func, if, for, while, class, enum declarations

Runtime Errors

If compile_success is true but run_success is false, check run_error. The code compiled but crashed during execution. Outputs collected before the crash are still available in outputs.

Error Return Values from Godot APIs

Many Godot API methods return an Error enum value (an integer) instead of throwing exceptions. You must always check whether the return value equals OK (0). If it is not OK, the call failed silently and the operation did not succeed.

For example, ResourceSaver.save() returns Error — returning 31 means ERR_INVALID_PARAMETER, not success. Never assume the call succeeded without checking.

When you get a non-OK error code, look it up in the Error enum documentation to understand what went wrong. Read the Error enum section in godot-docs/classes/[e-mail] (search for enum Error). The full list of error codes and their meanings:

Value	Constant	Meaning
0	OK	Success
1	FAILED	Generic error
2	ERR_UNAVAILABLE	Unavailable
3	ERR_UNCONFIGURED	Unconfigured
4	ERR_UNAUTHORIZED	Unauthorized
5	ERR_PARAMETER_RANGE_ERROR	Parameter range error
6	ERR_OUT_OF_MEMORY	Out of memory
7	ERR_FILE_NOT_FOUND	File not found
8	ERR_FILE_BAD_DRIVE	Bad drive
9	ERR_FILE_BAD_PATH	Bad path
10	ERR_FILE_NO_PERMISSION	No permission
11	ERR_FILE_ALREADY_IN_USE	File already in use
12	ERR_FILE_CANT_OPEN	Can't open file
13	ERR_FILE_CANT_WRITE	Can't write file
14	ERR_FILE_CANT_READ	Can't read file
15	ERR_FILE_UNRECOGNIZED	Unrecognized file
16	ERR_FILE_CORRUPT	Corrupt file
17	ERR_FILE_MISSING_DEPENDENCIES	Missing dependencies
18	ERR_FILE_EOF	End of file
19	ERR_CANT_OPEN	Can't open
20	ERR_CANT_CREATE	Can't create
21	ERR_QUERY_FAILED	Query failed
22	ERR_ALREADY_IN_USE	Already in use
23	ERR_LOCKED	Locked
24	ERR_TIMEOUT	Timeout
25	ERR_CANT_CONNECT	Can't connect
26	ERR_CANT_RESOLVE	Can't resolve
27	ERR_CONNECTION_ERROR	Connection error
28	ERR_CANT_ACQUIRE_RESOURCE	Can't acquire resource
29	ERR_CANT_FORK	Can't fork process
30	ERR_INVALID_DATA	Invalid data
31	ERR_INVALID_PARAMETER	Invalid parameter
32	ERR_ALREADY_EXISTS	Already exists
33	ERR_DOES_NOT_EXIST	Does not exist
34	ERR_DATABASE_CANT_READ	Database read error
35	ERR_DATABASE_CANT_WRITE	Database write error
36	ERR_COMPILATION_FAILED	Compilation failed
37	ERR_METHOD_NOT_FOUND	Method not found
38	ERR_LINK_FAILED	Linking failed
39	ERR_SCRIPT_FAILED	Script failed
40	ERR_CYCLIC_LINK	Cyclic link
41	ERR_INVALID_DECLARATION	Invalid declaration
42	ERR_DUPLICATE_SYMBOL	Duplicate symbol
43	ERR_PARSE_ERROR	Parse error
44	ERR_BUSY	Busy
45	ERR_SKIP	Skip
46	ERR_HELP	Help (internal)
47	ERR_BUG	Bug (implementation issue)
48	ERR_PRINTER_ON_FIRE	Printer on fire (easter egg)

Common Godot methods that return Error: ResourceSaver.save(), ResourceLoader.load(), DirAccess.make_dir_recursive(), FileAccess.open(), Node.get_tree().change_scene_to_file(), etc.

Always output the error code and its meaning via executeContext.output() so you can diagnose issues.

No Matching Executor (HTTP 404)

The executor_id/project_name/project_path didn't match any connected editor. Run GET /api/executors again to see what's available.

Timeout (HTTP 504)

Code execution exceeded the 30-second limit. This has two common causes:

Cause 1: Debugger paused the game (most common for game executor). When code on the game executor triggers a runtime error, Godot's debugger automatically pauses the game process. The game freezes, the request times out, and all subsequent game executor requests also hang. Before investigating anything else, check whether "Ignore Error Breaks" is enabled — see the "Before Executing on Game: Enable Ignore Error Breaks" section below. If the game is already paused, use the "Continue" button on the debugger toolbar (see "Controlling Game Pause/Resume from the Editor") to unfreeze it first, then enable Ignore Error Breaks.

Cause 2: Code genuinely takes too long. The code has an infinite loop or heavy computation. Simplify the code or break it into smaller steps.

Step 4: Look Up Godot APIs as Needed

When you need to use Godot classes, methods, or properties that you're not fully confident about, look them up in the reference docs:

• Class API reference: Read references/godot-docs/classes/class_<ClassName>.rst.txt — for any Godot class (e.g., class_node3d.rst.txt for Node3D, class_label3d.rst.txt for Label3D)
• Tutorials and guides: Browse references/godot-docs/tutorials/ for topic-specific guides
• Scripting guides: references/godot-docs/tutorials/scripting/ for general scripting patterns

Common Class File Naming Convention

Class files are named class_<lowercaseclassname>.rst.txt. For example:

• class_node.rst.txt — Node
• class_node2d.rst.txt — Node2D
• class_node3d.rst.txt — Node3D
• class_control.rst.txt — Control
• class_button.rst.txt — Button
• class_label.rst.txt — Label
• class_sprite2d.rst.txt — AnimatedSprite2D
• class_camera3d.rst.txt — Camera3D
• class_ridigidbody3d.rst.txt — RigidBody3D
• class_inputevent.rst.txt — InputEvent
• class_resouce.rst.txt — Resource
• class_packedscene.rst.txt — PackedScene
• class_timer.rst.txt — Timer
• class_area2d.rst.txt — Area2D
• class_pathfollow2d.rst.txt — PathFollow2D

Note: The @ prefix classes are special:

• [e-mail] — GDScript annotations and functions
• [e-mail] — Global functions and constants

Workflow Pattern

For complex tasks, follow this iterative pattern:

1. Discover — Query /api/executors to find available executors (note their type: editor or game)
2. Read reference — If unsure about GDScript syntax, read the syntax docs first
3. Look up API — If unsure about a Godot class/method, read the relevant class reference
4. Write code — Compose the GDScript snippet, using executeContext.output() to return results
5. Execute — Send via POST /api/execute
6. Check result — Parse the response, check compile_success and run_success
7. Handle errors — If errors, fix and retry
8. Use outputs — Extract information from the outputs array to inform next steps

Important Notes

Execution Context

The executeContext object has these characteristics:

• output(key: String, value: String) — call this to return data. Both arguments should be strings. The value is truncated if it exceeds the configured max char length (default 800).
• Output values that exceed the limit are truncated with a warning prefix
• editor_plugin — holds a reference to the EditorPlugin instance (the Hastur plugin itself). This is only available when executing on the editor executor; it is null on the game executor. Use this to call EditorPlugin APIs such as get_editor_interface(), get_undo_redo(), make_visible(), etc.

Prefer Triggering Editor Menu Actions (Important)

When the user's request corresponds to an action that exists in the Godot editor's GUI menus (Scene, Project, Debug, Editor, Help), you should prefer triggering the menu item's signal directly rather than calling the underlying API manually. This simulates real human interaction with the GUI and ensures all editor-side side effects (undo/redo registration, dirty flag clearing, UI updates, dialog prompts, etc.) are handled correctly.

For example, to save the scene, don't call ResourceSaver.save() or EditorInterface.save_scene() — instead, emit the id_pressed signal on the Scene menu's PopupMenu. The menu bar is accessible via:

var ei = executeContext.editor_plugin.get_editor_interface()
var menu_bar = ei.get_base_control().get_child(0).get_child(0).get_child(0)
var scene_menu = menu_bar.get_child(0) as PopupMenu
var save_item_id = scene_menu.get_item_id(6)
scene_menu.id_pressed.emit(save_item_id)

The editor's top-level menu structure:

• menu_bar.get_child(0) — Scene menu (New Scene, Save Scene, Save Scene As, Export As, Undo, Redo, etc.)
• menu_bar.get_child(1) — Project menu (Project Settings, Export, Tools, etc.)
• menu_bar.get_child(2) — Debug menu (Remote Debug, Visible Collision Shapes, etc.)
• menu_bar.get_child(3) — Editor menu (Editor Settings, Layout, Screenshot, etc.)
• menu_bar.get_child(4) — Help menu (Documentation, About, etc.)

To discover available menu items, iterate the PopupMenu's items:

for i in range(scene_menu.item_count):
    executeContext.output("menu_item", str(i) + ": " + scene_menu.get_item_text(i) + " (id=" + str(scene_menu.get_item_id(i)) + ")")

Then trigger the desired action by emitting id_pressed with the item's id.

This approach is preferred because:

• It goes through the same code path as when a human clicks the menu, ensuring full editor state consistency
• It handles edge cases the API might not (e.g., prompting to save before closing, confirming overwrites)
• It avoids silent failures where API calls return error codes without clear feedback

Use this pattern for: saving scenes, opening scenes, undo/redo, export, closing scenes, and any other action available through the editor menus.

Editor Plugin Environment

Code runs inside the Godot editor as a @tool script. This means:

• You have access to the editor's scene tree via EditorScript or get_tree()
• EditorInterface is available via executeContext.editor_plugin.get_editor_interface() (preferred) or as a singleton via Engine.get_singleton('EditorInterface')
• executeContext.editor_plugin provides the EditorPlugin instance itself for calling plugin-level APIs
• The code runs on the main thread — avoid infinite loops or heavy computation
• Changes to nodes/scenes are reflected in real-time in the editor

Game Runtime Environment

When targeting a game executor (type: "game"), code runs inside the running game process via the GameExecutor autoload. This means:

• You have full access to the live game scene tree via get_tree()
• All game nodes, runtime variables, physics state, and input are accessible
• EditorInterface is not available (this is the game process, not the editor)
• The code runs on the main thread — avoid infinite loops or heavy computation
• Use this for inspecting live game state: FPS, scene tree, node properties, signals, physics bodies, etc.

Example game runtime queries:

executeContext.output("fps", str(Engine.get_frames_per_second()))
executeContext.output("current_scene", str(get_tree().current_scene.name))
executeContext.output("child_count", str(get_tree().current_scene.get_child_count()))

Before Executing on Game: Enable Ignore Error Breaks (Critical)

When you execute GDScript code on the game executor and that code causes a runtime error (invalid method call, null reference, etc.), Godot's built-in debugger will automatically pause the entire game process. This causes the executor request to time out (HTTP 504 after 30 seconds) because the game is frozen and cannot respond. Even worse, all subsequent game executor requests will also time out until the debugger is resumed.

To prevent this, always check and enable "Ignore Error Breaks" on the editor before executing code on the game executor. This tells the debugger not to pause on script errors, allowing the game to continue running even if your code has bugs.

Always check before each game executor call, not just the first one — the setting can be reset between sessions or by other editor actions.

Execute the following on the editor executor before your game executor call. This code first checks whether Ignore Error Breaks is already enabled, and only toggles it if needed:

var ei = executeContext.editor_plugin.get_editor_interface()
var base = ei.get_base_control()

var stack = [[base, 0]]
var toolbar = null
while stack.size() > 0:
	var pair = stack.pop_back()
	var node = pair[0]
	var depth = pair[1]
	if toolbar != null:
		break
	if depth > 25:
		continue
	if node.name.find("Stack Trace") != -1 and node.get_class() == "VBoxContainer":
		for child in node.get_children():
			if child is HBoxContainer:
				toolbar = child
				break
	for child in node.get_children():
		stack.append([child, depth + 1])

if toolbar != null:
	for child in toolbar.get_children():
		if child is Button and child.tooltip_text == "Ignore Error Breaks":
			if child.button_pressed:
				executeContext.output("ignore_error_breaks", "already_enabled")
			else:
				child.set_toggle_mode(true)
				child.set_pressed(true)
				child.emit_signal("pressed")
				executeContext.output("ignore_error_breaks", "enabled")
			break
else:
	executeContext.output("ignore_error_breaks", "toolbar not found")

Why the complexity? The "Ignore Error Breaks" button is a plain Button with toggle_mode = false. Simply calling emit_signal("pressed") or set_pressed(true) does nothing — the button ignores these calls when toggle mode is off. You must call set_toggle_mode(true) first, then set_pressed(true), then emit_signal("pressed").

The code above dynamically discovers the button by walking the editor's scene tree, so it won't break if node paths change between sessions.

Controlling Game Pause/Resume from the Editor

The editor's debugger toolbar provides buttons to control the game's execution state. These are useful when the game is paused by the debugger and you need to resume it.

The debugger toolbar lives inside the "Stack Trace" tab's HBoxContainer. The key buttons (identified by their tooltip_text):

Tooltip	Function
Continue	Resume the game after a debugger pause
Step Into	Step into the next function call
Step Over	Step over the next line
Step Out	Step out of the current function
Break	Pause the game at the next opportunity
Skip Breakpoints	Skip all breakpoints
Ignore Error Breaks	Don't pause on script errors

To resume a paused game, find the "Continue" button and emit pressed:

var ei = executeContext.editor_plugin.get_editor_interface()
var base = ei.get_base_control()

var stack = [[base, 0]]
var toolbar = null
while stack.size() > 0:
	var pair = stack.pop_back()
	var node = pair[0]
	var depth = pair[1]
	if toolbar != null:
		break
	if depth > 25:
		continue
	if node.name.find("Stack Trace") != -1 and node.get_class() == "VBoxContainer":
		for child in node.get_children():
			if child is HBoxContainer:
				toolbar = child
				break
	for child in node.get_children():
		stack.append([child, depth + 1])

if toolbar != null:
	for child in toolbar.get_children():
		if child is Button and child.tooltip_text == "Continue":
			child.emit_signal("pressed")
			executeContext.output("continue", "pressed")
			break

The "Continue" button is a non-toggle button, so emit_signal("pressed") works directly — no need for the set_toggle_mode workaround.

Snippet Mode Details

In snippet mode, your code is wrapped like this:

@tool
extends RefCounted

var executeContext

func run():
    <your code here, indented with tabs>

This means:

• You're inside a RefCounted instance, not a Node
• To access the scene tree, use Engine.get_main_loop() to get the SceneTree
• To access editor functionality, use executeContext.editor_plugin to get the EditorPlugin instance, or EditorInterface via singleton
• executeContext is set as a property before run() is called

Accessing EditorPlugin from Snippets

You can access the EditorPlugin instance directly via executeContext.editor_plugin:

var plugin = executeContext.editor_plugin
var ei = plugin.get_editor_interface()
executeContext.output("current_scene", str(ei.get_current_scene().name))

Common EditorPlugin APIs available through this reference:

• get_editor_interface() — returns EditorInterface singleton
• get_undo_redo() — returns the UndoRedo manager
• make_visible(bool) — show/hide the plugin's dock
• get_plugin_name() — the plugin's display name

Accessing the Scene Tree from Snippets

Since snippets extend RefCounted (not Node), you need to access the scene tree differently:

var tree = Engine.get_main_loop() as SceneTree
var root = tree.root
var edited_scene = tree.edited_scene_root

Or use the EditorPlugin reference:

var ei = executeContext.editor_plugin.get_editor_interface()
var edited_scene = ei.get_current_scene()

Output Best Practices

• Convert all values to strings before passing to output(): str(value)
• Use descriptive keys: "node_count", "scene_path", "error_message"
• For large outputs, be aware of the character limit per value
• If you need to return structured data, consider JSON-encoding it: JSON.stringify(data)

Reference Files

GDScript Syntax (read before writing code)

• references/gdscript-syntax/gdscript_basics.rst.txt — Core language reference
• references/gdscript-syntax/gdscript_advanced.rst.txt — Advanced features
• references/gdscript-syntax/[e-mail] — @GDScript built-in functions/annotations
• references/gdscript-syntax/[e-mail] — Global scope functions/constants
• references/gdscript-syntax/gdscript_styleguide.rst.txt — Style guide

Godot API Reference (read as needed)

• references/godot-docs/classes/class_*.rst.txt — 1066 class reference files
• references/godot-docs/tutorials/ — Guides and tutorials by topic