argent-metro-debugger

name	argent-metro-debugger
description	Debug a React Native app via Metro CDP using argent debugger tools. Use when connecting to Metro, inspecting React components, reading console logs, or evaluating JavaScript in the app runtime.

1. Prerequisites

The debugger requires Metro dev server running (default localhost:8081) and a React Native app connected to Metro (at least one CDP target). Verify via debugger-status.

Android: reverse port for Metro

Android emulators and physical devices do not resolve the host's localhost by default. Before the RN app can reach Metro, forward port 8081 (or whichever port Metro is on) from the device back to the host:

adb -s <serial> reverse tcp:8081 tcp:8081

<serial> is the Android serial from list-devices. Once reversed, the app on the device connects to Metro just like an iOS simulator does, and all debugger-* / network-* / react-profiler-* tools work unchanged. If the device restarts or adb drops, re-run the command. A failing Metro connection on Android almost always means adb reverse has not been done or has been lost.

2. Tool Overview

All tools accept port (default 8081) AND device_id (the iOS Simulator UDID or Android serial, a.k.a. logicalDeviceId — the CDP-reported id that matches the device). Always make sure you target the correct app on the correct device.

One Metro port can serve multiple connected devices (e.g. two simulators on localhost:8081, or an iOS simulator alongside an Android emulator with adb reverse set up). device_id pins every debugger/network/profiler call to a specific device so sessions do not collide.

Connect & diagnostics

Tool	Purpose
debugger-connect	Connect to Metro CDP. Returns port, projectRoot, deviceName, appName, logicalDeviceId, isNewDebugger, connected. The returned logicalDeviceId is the device_id for every subsequent debugger/network/profiler call.
debugger-status	Like connect + loadedScripts, enabledDomains, sourceMapReady. Use to diagnose.

Reload & recovery

Tool	Purpose
debugger-reload-metro	Reload all connected apps (like pressing "r" in Metro terminal). Needs a CDP target.
restart-app	Terminate and relaunch the app by device id and bundleId. Use when app lost Metro connection.

Inspection & console

Tool	Purpose
debugger-component-tree	Full React fiber tree (names, depth, bounding rects, tap coordinates).
debugger-inspect-element	Inspect at (x, y) using logical pixel coordinates (not normalized 0-1): component hierarchy with source file:line and code fragment. See references/source-maps.md.
debugger-log-registry	Get log summary (counts, clusters, file path). Then use Grep/Read on the flat log file for details.
debugger-evaluate	Run a JS expression in the app runtime.

---

3. Component Inspection

debugger-component-tree vs debugger-inspect-element

	debugger-component-tree	debugger-inspect-element
Best for	Layout overview; finding tap targets; user-defined component hierarchy	Identifying a visible element and tracing it to its source file
Use when	"What's on screen and where?"	"What component is this and where is it defined?"

Both can point to source files, but inspect-element is purpose-built for source tracing. component-tree is for orientation and tap-target discovery.

includeSkipped guidance

Applies to both debugger-component-tree and debugger-inspect-element. Set to true only when debugging filter behavior — e.g., an expected component is missing from output, or you need to inspect a very specific branch of the tree (not just an overview).

Warning: Output can be very large. Always combine with maxNodes (component-tree) or maxItems (inspect-element) and increase it incrementally (e.g., start at 50, then grow). Do not use includeSkipped without a limit on large apps.

---

4. Golden Rules

1. debugger-status first when something fails — it runs discovery, connection, and returns diagnostics.
2. "No CDP targets" → get the app to connect to Metro — use restart-app on the device, then retry debugger-status.
3. Never assume one failure is permanent — follow recovery steps before asking the user. For starting Metro and full failure recovery, see argent-react-native-app-workflow and references/failure-scenarios.md.

---

5. Reading Console Logs (Log Registry)

Logs are written to a flat log file on disk. Use the log-registry → grep pattern instead of reading logs inline.

Workflow

1. Call debugger-log-registry — returns: file (log path), totalEntries, byLevel, clusters (top message groups with counts and source file info)
2. Search the file using Grep or Read with patterns from the response.

Large log files: If totalEntries exceeds 10 000, delegate the grep exploration to an Explore subagent — pass it the file path, the entry format, and the patterns you need.

Flat log format

One entry per line — fields (whitespace-separated, | delimiter before message)

Field	Example	Notes
[L:<id>]	[L:42]	Unique grep anchor
<timestamp>	2026-03-17T14:30:00.000Z	ISO 8601
<LEVEL>	ERROR, WARN , LOG	Uppercase, padded to 5 chars
<source>	src/api/user.ts:42 or -	Relative path from source map; - if unavailable
<message>	Failed login attempt	Full message; embedded newlines replaced with space

Source attribution (file + line) is also available in clusters returned by debugger-log-registry.

Log files and messages can be large - Always scope your search, treat the file like a database, not a document.

When reading from the log file:

• Never Read the log file directly. Use grep or shell commands with limits using the above file format tips.
• Default to -m 50 unless you need more.
• Use tail -N recent entries.
• clusters[].message gives you the exact text which you may look for

If the file is too large Delegate to an Explore subagent with the file path, the format spec above, and the specific patterns you need.

---

Quick Reference

Action	Tool
Diagnose / check connection	debugger-status
Connect to Metro CDP	debugger-connect
Reload JS (already connected)	debugger-reload-metro
Relaunch app on device	restart-app
Inspect component at point	debugger-inspect-element
Full component tree	debugger-component-tree
Console log overview	debugger-log-registry (summary + log file path for Grep/Read)
Evaluate JS	debugger-evaluate