ac-nexus

name	ac-nexus
version	5.3.0
identifier	oywq00008-cell-AC-Nexus-for-agent-skill
description	🎮 AI Agent 智能空调控制核心库 — 零 GUI 依赖，import 即用。支持 17 大品牌空调（格力/美的/海尔/大金等），直连 Broadlink RM 红外遥控器，同时接入所有支持 MIoT 协议的米家红外遥控器。MIoT spec 自动匹配 siid/piid，百度+和风双天气源，中央气象台+NHC 双风暴源，多日期组定时模板，Markdown 日志，故障诊断。适配树莓派/NAS/OpenWRT/桌面全平台。（原名 BroadlinkAC，现已更名为 AC-Nexus，正式成为空调中枢）

AC-Nexus — AI Agent Smart AC Controller v5.3.0

Cross-platform AC control library for Broadlink RM series IR blasters and Xiaomi MIoT-compatible IR remote controllers. Zero GUI dependency — designed for AI agents to clone, install, and control air conditioners programmatically. Device-specific MIoT siid/piid auto-matched from miot-spec.org with 7-day local cache.

📢 Rebrand Notice: Formerly BroadlinkAC, now AC-Nexus (空调中枢). All Xiaomi IR remote controllers compatible with MIoT protocol are supported — just scan with Mi Home app to add, then control via local network. No brand limitations.

⚠️ Safety & Persistence

This skill writes durable state to the user's machine. init() creates ~/.ac_controller/config.json (API keys, device config, schedule templates) and starts a background scheduler daemon thread. The scheduler survives agent task completion — scheduled on/off times, auto-adjust, and storm auto-shutdown will continue to run autonomously. Always confirm with the user before:

• Modifying or creating schedule templates
• Enabling auto-adjust or typhoon auto-shutdown
• Changing device configuration (brand, temperature rules, location)

To fully disable automation: set schedule_enabled=False and auto_adjust=False for the device, then call _cfg.save_config(_cfg.config).

Quick Start (Agent)

git clone https://github.com/oywq00008-cell/AC-Nexus.git
cd AC-Nexus
pip install -r requirements-core.txt

from acnexus_core import init, send_ac, fetch_weather

# One-time setup — all config persisted
init(
    baidu_key="your_baidu_key",
    location={"lat": 22.54, "lon": 114.05, "name": "Shenzhen"},
    brand="Gree"
)

# Control AC — auto-routes between Broadlink IR and Xiaomi MIoT
send_ac("on", "cool", 26, "auto")     # Turn on, cool 26°C, auto fan
send_ac("off", "cool", 26, "auto")    # Turn off

# Weather — dual source (Baidu default, falls back to QWeather)
weather = fetch_weather()

# Storm threat — quick check + smart shutdown
from acnexus_core import typhoon_threat_distance, typhoon
dist, name = typhoon_threat_distance()
print(f"Nearest: {name} at {dist}km")
# Intelligent: wind-speed + distance tiered, TD excluded, pauses scheduler
alerts = typhoon.judge_and_shutdown(print)

Multi-Brand Architecture (v5.3.0)

AC-Nexus supports multiple device providers simultaneously. Devices are organized by brand type in the config:

"devices": {
    "broadlink": {
        "e870723f41ee": {"host": "192.168.8.214", "model": "RM4 mini", ...}
    },
    "xiaomi_cloud": {
        "2003509235": {"host": "192.168.8.119", "token": "***", "model": "qjiang.acpartner.ac02",
                       "miot_spec": {"power": {"siid":3,"piid":1}, "mode": {"siid":3 ...
                       ...
    

Each provider's devices are fully isolated — separate schedules, temperature rules, and auto-adjust settings. send_ac() automatically detects the device type and routes commands:

• Broadlink devices → IR raw hex sent via UDP
• Xiaomi devices → MIoT protocol via local network (set_properties)

API Reference

Setup

First-time: install dependencies

pip install -r requirements-core.txt

Function	Description
init(baidu_key=None, api_key=None, qw_host=None, location=None, brand=None)	Initialize config + start background scheduler. Writes to ~/.ac_controller/config.json. Idempotent.
acnexus_core.xiaomi_local.fetch_miot_spec(model)	Fetch per-device siid/piid from miot-spec.org. 7-day local cache at ~/.ac_controller/miot_instances.json. Used automatically when adding devices — not needed by the Agent.
acnexus_core.config.save_config(cfg)	Save config to disk (atomic write)
acnexus_core.config.find_device(mac)	Find device by MAC across all providers → (provider, device_dict)

⚠️ Device naming is critical for Agent usability. Each device's name field in config should be a human-readable room/location name (e.g. "二楼卧室", "客厅"). The Agent matches user intent ("关掉二楼房间的空调") by searching device names. Open the desktop app → click the ✏️ rename button next to the device dropdown to set meaningful names.

AC Control (Broadlink IR + Xiaomi MIoT Local)

Function	Description
send_ac(power, mode, temp, fan, source="手动", mac=None)	Send command. Auto-routes: broadlink → IR hex, xiaomi_cloud → MIoT set_properties. power: "on"/"off". mode: "cool"/"heat"/"dry"/"fan"/"auto". temp: 16-30. fan: "auto"/"1"/"2"/"3". Pass mac= to target a specific device.
decide_ac(outdoor_temp, mac=None)	Run temperature rules → returns (target_temp, mode)
get_device()	Get current Broadlink device (for IR learning)
get_current_device()	Get current device config dict from devices[provider][mac]

send_ac covers the minimum universal set across all brands. Xiaomi devices use per-model siid/piid from dev["miot_spec"] when available, falling back to hardcoded defaults (siid=3/4). No manual mapping needed.

Adding Xiaomi MIoT Devices

Step 1 — Get session via QR login:

from acnexus_core.xiaomi_cloud import login_qr
# In a terminal: prints ASCII QR code automatically
# In Jupyter/GUI: pass a callback to render the QR image
session = login_qr()
# Returns dict with auth tokens for listing devices

Step 2 — Add device to config:

import acnexus_core.config as _cfg
from acnexus_core.xiaomi_cloud import list_devices
from acnexus_core.xiaomi_local import fetch_miot_spec

# List devices on this mi account
devices = list_devices(session)

# Pick an IR remote controller and add it
for d in devices:
    if d["model"] in ("lumi.acpartner.mcn02", "qjiang.acpartner.ac02"):
        spec = fetch_miot_spec(d["model"])  # Auto-match siid/piid
        _cfg.add_or_update_device(d["did"], {
            "did": d["did"],
            "host": d["ip"],
            "mac": d["mac"],
            "model": d["model"],
            "name": d["name"],
            "token": d["token"],  # Critical for local network control!
            "brand": "格力",      # Default brand, user changes in Mi Home app
            "miot_spec": spec,    # Device-specific siid/piid (optional, safe fallback)
        })
        break

_cfg.save_config(_cfg.config)

Step 3 — Control via local network (no cloud after this):

send_ac("on", "cool", 25, "auto")  # Automatically uses MIoT local network

Reading Xiaomi Device State

Unlike Broadlink (one-way IR), MIoT devices support reading current state:

from miio import Device
d = Device("192.168.8.119", "97af6abc63a7f95da50dc8710005a42d")
r = d.send('get_properties', [
    {'siid': 3, 'piid': 1},  # Power (True/False)
    {'siid': 3, 'piid': 2},  # Mode (0=cool 1=heat 2=auto 3=fan 4=dry)
    {'siid': 3, 'piid': 4},  # Temperature (16-30)
    {'siid': 4, 'piid': 2},  # Fan speed (0=auto 1=low 2=med 3=high)
])
print(f"Power={r[0]} Mode={r[1]} Temp={r[2]} Fan={r[3]}")

MIoT Protocol Details

MIoT-compatible IR remote controllers use standard service IDs in most cases:

• siid=3, piid=1: Power (True/False) — some devices use piid=5
• siid=3, piid=2: Mode (0=cool 1=heat 2=auto 3=fan 4=dry)
• siid=3, piid=4: Target temperature (16-30) — some use piid=3
• siid=4, piid=2: Fan speed (0=auto 1=low 2=med 3=high)

⚠️ Per-device variation: Not all devices use the same piid values. fetch_miot_spec(model) auto-matches the correct values from miot-spec.org. The Agent should prefer reading dev["miot_spec"] from config — if present, use those values; if absent, fall back to the hardcoded defaults above.

IR Learning (support any brand on Broadlink)

Function	Description
learn_one(host)	Enter learning mode, wait for IR signal → raw hex or None (45s timeout)
get_raw_code(name, power, mode, temp, fan)	Look up learned code for custom device
load_custom_codes()	Load all custom codes from ~/.ac_controller/custom_codes.json
save_custom_codes(data)	Persist learned codes
list_custom()	List custom device names

IR learning only works with Broadlink devices. Xiaomi MIoT devices use the pre-built IR code library on the device itself.

Weather & Alerts (Dual Source: Baidu + QWeather)

Function	Description
fetch_weather()	Current weather — auto-routes via Baidu/QWeather
fetch_weather_alerts()	Local weather warnings

Storm Tracking (Dual Source: China NMC + US NHC)

Function	Description
fetch_typhoons()	Active storms from NMC or NHC
fetch_typhoon_detail(typhoon_id)	Detailed track + forecast
typhoon_threat_distance()	Agent-critical: nearest storm distance (km) + name. Use judge_and_shutdown() for intelligent wind-speed+distance tiered shutdown. Never throws — returns (99999, "") on error
typhoon.judge_and_shutdown(log_func)	One-call: fetch typhoon data → wind-speed + distance tiered shutdown (≥41m/s <100km / ≥33m/s <70km / default <50km), TD excluded, shut down ALL devices across ALL brands + pause scheduler. Returns alerts list

Logger

Function	Description
write_log(category, msg)	Append daily log (thread-safe)
read_log(date_str)	Read log by date
get_log_dates()	List dates with logs

Supported AC Brands (17 + Xiaomi MIoT)

hvac_ir: Gree, Midea, Hisense, Daikin, Mitsubishi, Hitachi, Fujitsu, Ballu, Carrier MCA, Hyundai, Fuego

Custom protocols: Haier, AUX, Panasonic

Xiaomi MIoT: All MIoT-compatible IR remote controllers — add via QR scan, control via local network. Supports multiple devices per account. Per-device siid/piid auto-matched.

Multi-brand mappings: Xiaomi, Hualing → Midea protocol; Carrier NQV → Carrier MCA

Weather Providers

Provider	Free Tier	Features
Baidu (default)	5,000 calls/day	Real-time + forecast + alerts
QWeather	50,000 calls/month	Real-time + forecast + alerts

Key Design

• import acnexus_core has zero side effects — no I/O, no threads
• init() is idempotent — safe to call multiple times
• Config auto-persisted to ~/.ac_controller/config.json (atomic write)
• Runs on any device with Python 3.9+ (macOS/Windows/Linux/Raspberry Pi)
• typhoon_threat_distance() never throws — returns (99999, "") on any error
• Thread-safe logging with threading.Lock
• Multi-provider architecture: devices[provider][mac] — fully isolated per brand
• send_ac auto-routes: Broadlink → IR hex / Xiaomi → MIoT local network
• Device-specific MIoT siid/piid auto-matched with 7-day local cache

Common Agent Tasks

"Control a specific device (multi-device setup)"

from acnexus_core import init, send_ac
import acnexus_core.config as _cfg
init()

# List all devices across all providers
for provider, devs in _cfg.config["devices"].items():
    for did, dev in devs.items():
        print(f"[{provider}] {dev['name']} = {did[:8]}")

# Control a specific device by MAC/DID
send_ac("on", "cool", 25, "auto", mac="e870723f41ee")

"Add a new Xiaomi device for the user"

from acnexus_core.xiaomi_cloud import login_qr
from acnexus_core.xiaomi_cloud import list_devices
from acnexus_core.xiaomi_local import fetch_miot_spec
import acnexus_core.config as _cfg

# Step 1: Login (terminal prints ASCII QR, user scans with Mi Home)
session = login_qr()

# Step 2: List devices and add IR remote controllers
devices = list_devices(session)
ir_models = {"lumi.acpartner.mcn02", "qjiang.acpartner.ac02", "chuangmi.remote.v6"}
for d in devices:
    if d["model"] in ir_models:
        spec = fetch_miot_spec(d["model"])
        _cfg.add_or_update_device(d["did"], {
            "did": d["did"], "host": d["ip"], "mac": d["mac"],
            "model": d["model"], "name": d["name"], "token": d["token"],
            "brand": "格力", "miot_spec": spec,
        })
_cfg.save_config(_cfg.config)
print(f"Added {len(devices)} device(s)")

"Read current state of a Xiaomi AC"

import acnexus_core.config as _cfg
from miio import Device

# Get device info from config
dev = _cfg.config["devices"]["xiaomi_cloud"]["2003509235"]
# Use device-specific siid/piid from miot_spec when available
spec = dev.get("miot_spec")
if spec:
    props = [spec["power"], spec["mode"], spec["temp"], spec["fan"]]
else:
    props = [{"siid":3,"piid":1}, {"siid":3,"piid":2}, {"siid":3,"piid":4}, {"siid":4,"piid":2}]

d = Device(dev["host"], dev["token"])
r = d.send('get_properties', props)
POWER = {True: "开", False: "关"}
MODE = {0: "制冷", 1: "制热", 2: "自动", 3: "送风", 4: "除湿"}
FAN = {0: "自动", 1: "低", 2: , : }
()

"Is there a storm nearby?" / "Shut down all ACs due to storm"

from acnexus_core import init, typhoon
init()
# ✅ One-liner: intelligent wind-speed + distance tiered shutdown
#    (≥41m/s<100km / ≥33m/s<70km / <50km default),
#    tropical depressions excluded, also pauses scheduler
alerts = typhoon.judge_and_shutdown(print)
if not alerts:
    print("No storm threat — all clear")

"Auto-adjust based on outdoor temperature"

from acnexus_core import init, fetch_weather, decide_ac, send_ac
init()
w = fetch_weather()
if w:
    target, mode = decide_ac(float(w["temp"]))
    send_ac("on", mode, target, "auto")

"Learn IR codes for a custom brand"

from acnexus_core.ir_learner import learn_one, save_learned_codes
hex_code = learn_one("192.168.8.214")  # Broadlink device IP
save_learned_codes("MyAC", "gree", {"关机": hex_code})
send_ac("off", "cool", 26, "auto")  # Routes to learned code automatically

Scheduling & Automation

⚠️ All schedule changes are persistent — they survive Python process exit and will be executed by the background scheduler daemon. Always confirm with the user before enabling or modifying schedules.

The scheduler runs all devices across all providers. Typhoon auto-shutdown (intelligent wind-speed + distance tiered) pauses the scheduler for all devices.

Read current schedule

import acnexus_core.config as _cfg
from acnexus_core import init
init()

# Navigate the nested structure: devices[provider][mac]
provider = _cfg.config.get("current_brand_type", "broadlink")
mac = _cfg.config.get("current_device_mac", "")
dev = _cfg.config["devices"][provider][mac]
print(dev.get("active_template"))
print(dev.get("schedule_enabled"))

Create a schedule template (multi-group)

templates = _cfg.config.setdefault("schedule_templates", {})
templates["工作日"] = {
    "groups": [{
        "days": [1, 2, 3, 4, 5],
        "slots": [{
            "on": "08:00", "on_enabled": True,
            "off": "18:00", "off_enabled": True
        }]
    }, {
        "days": [6, 7],
        "slots": [{
            "on": "12:00", "on_enabled": True,
            "off": "23:00", "off_enabled": True
        }]
    }]
}
dev["active_template"] = "工作日"
dev["schedule_enabled"] = True
_cfg.save_config(_cfg.config)

Enable/disable auto-adjust (per device)

dev["auto_adjust"] = True
_cfg.save_config(_cfg.config)

Desktop GUI

Pre-built installers (Windows/macOS/Linux), auto-built by GitHub Actions. Download from Releases.

OpenWRT Router Plugin

7×24 unattended AC control on OpenWRT routers. See AC-Nexus-OpenWRT.