원클릭으로 Manus에서 모든 스킬 실행

xrefs

스타36

포크7

업데이트2026년 7월 17일 14:24

Analyze IDA cross-references. Use when asked about callers, callees, imports, data refs, call graphs, or dependency chains.

설치

Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.

Manus에서 실행

출처

allthingsida

allthingsida/idasql-skills

GitHub 저장소 열기 Creator 저장소 보기

다운로드

Manus에서 실행

Trigger Intents

Use this skill when user asks:

"Who calls this?" / "What does this call?"
"Where is this string/import referenced?"
"Show call graph dependencies."

Route to:

grep for candidate entity lookup by name/pattern before relationship analysis
analysis for broader triage context
decompiler for semantic interpretation after graph narrowing
disassembly for instruction-level call-site proof

Do This First (Warm-Start Sequence)

-- 1) Core relation volume
SELECT COUNT(*) AS xref_count FROM xrefs;

-- 2) Top imports (dependency hints)
SELECT module, COUNT(*) AS import_count
FROM imports
GROUP BY module
ORDER BY import_count DESC;

-- 3) Most called functions
SELECT printf('0x%X', to_addr) AS callee, COUNT(*) AS callers
FROM xrefs
WHERE is_code = 1
GROUP BY to_addr
ORDER BY callers DESC
LIMIT 20;

Interpretation guidance:

Use relation counts to prioritize hotspots before expensive deep analysis.
Prefer indexed filters (to_addr/from_addr) for fast response.

Failure and Recovery

Full-scan query too slow:
- Add to_addr = X or from_addr = X constraints.
Target unresolved by name:
- Resolve/verify address first through the names table or explicit EA literals.
Sparse results:
- Pivot through imports, strings, or disasm_calls joins.
Looking for references to a struct/union FIELD:
- Use struct_member_xrefs (filter by type_name/type_ordinal/member_id). Do NOT LIKE-scan instructions.disasm / instruction_operands.text for the field name — it is the slow, crash-adjacent pattern this table replaces.
Target lives inside a static struct or dispatch table:
- In modern binaries a string/data target is often referenced from a registration or vtable, not from code. xrefs WHERE to_addr = X may then return only .rdata rows. Walk back to the table head, then re-query xrefs against the table's address.
```
-- 1) find the head of the item that contains the target
SELECT addr FROM heads
WHERE addr <= 0x140027D50 ORDER BY addr DESC LIMIT 1;
-- 2) xrefs into the table head (where the code consumer points)
SELECT * FROM xrefs WHERE to_addr = <head> AND is_code = 1;
```

Handoff Patterns

xrefs -> decompiler for top candidate function semantics.
xrefs -> analysis for campaign-level synthesis.
xrefs -> annotations to persist relationship findings.

xrefs

Cross-references - the most important table for understanding code relationships.

Column	Type	Description
`from_addr`	INT	Source address (who references)
`to_addr`	INT	Target address (what is referenced)
`type`	INT	Xref type code (never the ordinary-flow code, see below)
`is_code`	INT	1=code xref (call/jump), 0=data xref
`from_func`	INT	Pre-computed containing function address (NULL when not in a function)

Semantics: the surface exposes real references only — ordinary fall-through flow edges (fl_F: each instruction "referencing" the next) are excluded on both the full scan and the to_addr/from_addr/from_func fast paths, matching IDA's Ctrl-X view and the other xsql tools. Counts therefore reflect calls/jumps/data refs, not instruction adjacency.

-- Who calls function at 0x401000?
SELECT printf('0x%X', from_addr) as caller FROM xrefs WHERE to_addr = 0x401000 AND is_code = 1;

-- What does function at 0x401000 reference?
SELECT printf('0x%X', to_addr) as target FROM xrefs WHERE from_addr >= 0x401000 AND from_addr < 0x401100;

struct_member_xrefs

Cross-references to a specific struct/union member (Issue 11). Resolves the member's IDA tid and enumerates xrefs directly — use this instead of LIKE scans over instructions.disasm / instruction_operands.text. Requires a filter on type_ordinal, type_name, or member_id (an unfiltered query errors). Embedded members are expanded recursively with a dotted member_path.

Column	Type	Description
`type_ordinal` / `type_name`	INT/TEXT	Queried (top-level) type
`member_index`	INT	Leaf index within its immediate parent type
`member_name` / `member_path`	TEXT	Leaf name / dotted path (`payload.leaf.data`)
`member_offset` / `member_offset_bits`	INT	Cumulative offset within the queried type
`member_id`	INT	Member tid (also a filter key)
`xref_from`	INT	Referencing address
`xref_to`	INT	Member tid (== `member_id`)
`xref_type`	INT	Raw IDA xref type code
`xref_kind`	TEXT	`read` / `write` / `offset` / `call` / `jump` / `flow`
`function_addr` / `function_name`	INT/TEXT	Containing function (NULL if none)
`operand_index`	INT	Operand referencing the member (best-effort; NULL)
`instruction_text`	TEXT	Disasm line at `xref_from` (NULL if not an instruction)
`access_offset` / `access_size`	INT	Access sub-offset / width (best-effort; NULL)

-- Who writes _EH3_EXCEPTION_REGISTRATION.TryLevel?
SELECT member_path, xref_kind, function_name, instruction_text
FROM struct_member_xrefs
WHERE type_name = '_EH3_EXCEPTION_REGISTRATION' AND member_name = 'TryLevel';

-- All member references for a type (incl. nested), grouped by member
SELECT member_path, count(*) AS refs FROM struct_member_xrefs
WHERE type_ordinal = (SELECT ordinal FROM types WHERE name = 'db_entry_t')
GROUP BY member_path;

imports

Imported functions from external libraries.

Column	Type	Description
`addr`	INT	Import address (IAT entry)
`name`	TEXT	Import name
`module`	TEXT	Module/DLL name
`ordinal`	INT	Import ordinal
`folder_path`	TEXT	Writable import folder path
`full_path`	TEXT	Full import dirtree path

-- Imports from kernel32.dll
SELECT name FROM imports WHERE module LIKE '%kernel32%';

-- Organize network-related imports
UPDATE imports
SET folder_path = 'idasql/imports/network'
WHERE name LIKE '%socket%' OR name LIKE '%connect%' OR name LIKE '%send%';

Convenience Views

callers

Who calls each function. Caller names are resolved by the view from the funcs and names tables.

Column	Type	Description
`func_addr`	INT	Target function address
`caller_addr`	INT	Xref source address
`caller_name`	TEXT	Calling function name
`caller_func_addr`	INT	Calling function start (from `from_func`)

Underlying query:

SELECT x.to_addr as func_addr, x.from_addr as caller_addr,
       COALESCE((SELECT name FROM names WHERE addr = x.from_func LIMIT 1), printf('sub_%X', x.from_func)) as caller_name,
       x.from_func as caller_func_addr
FROM xrefs x WHERE x.is_code = 1 AND x.from_func != 0

-- Who calls function at 0x401000?
SELECT caller_name, printf('0x%X', caller_addr) as from_addr
FROM callers WHERE func_addr = 0x401000;

-- Most called functions
SELECT printf('0x%X', func_addr) as addr, COUNT(*) as callers
FROM callers GROUP BY func_addr ORDER BY callers DESC LIMIT 10;

callees

What each function calls. Inverse of callers view. Uses from_func for efficient function-level grouping.

Column	Type	Description
`func_addr`	INT	Calling function address (from `from_func`)
`func_name`	TEXT	Calling function name
`callee_addr`	INT	Called address
`callee_name`	TEXT	Called function/symbol name

-- What does main call?
SELECT callee_name, printf('0x%X', callee_addr) as addr
FROM callees WHERE func_name LIKE '%main%';

-- Functions making most calls
SELECT func_name, COUNT(*) as call_count
FROM callees GROUP BY func_addr ORDER BY call_count DESC LIMIT 10;

string_refs

Pre-joined view of string cross-references with containing function info.

Column	Type	Description
`string_addr`	INT	Address of the string
`string_value`	TEXT	String content
`string_length`	INT	String length
`ref_addr`	INT	Address of the referencing instruction
`func_addr`	INT	Containing function address
`func_name`	TEXT	Containing function name

-- Strings referenced by a specific function
SELECT string_value, func_name FROM string_refs WHERE func_addr = 0x401000;

-- Find functions referencing password-related strings
SELECT string_value, func_name FROM string_refs WHERE string_value LIKE '%password%';

-- Most referenced strings
SELECT string_value, COUNT(*) as ref_count
FROM string_refs GROUP BY string_addr ORDER BY ref_count DESC LIMIT 10;

data_refs

Cached table of data (non-code) cross-references with containing function info. Whole-program aggregates are supported.

Column	Type	Description
`from_addr`	INT	Source address of the reference
`to_addr`	INT	Target data address
`from_func_addr`	INT	Containing function address
`from_func_name`	TEXT	Containing function name
`ref_type`	INT	Xref type code

-- Data references from a specific function
SELECT * FROM data_refs WHERE from_func_addr = 0x401000;

-- Functions with most data references
SELECT from_func_name, COUNT(*) as data_ref_count
FROM data_refs GROUP BY from_func_addr ORDER BY data_ref_count DESC LIMIT 10;

call_graph

Table-valued function for BFS call graph traversal. Uses HIDDEN parameters for traversal control.

Column	Type	Description
`func_addr`	INT	Function address in the graph
`func_name`	TEXT	Function name
`depth`	INT	BFS depth from start
`parent_addr`	INT	Parent function address in the traversal
`start`	INT	HIDDEN — Starting function address
`direction`	TEXT	HIDDEN — `'down'` (callees), `'up'` (callers), or `'both'`
`max_depth`	INT	HIDDEN — Maximum traversal depth

Always provide WHERE constraints for all 3 hidden parameters.

-- Forward call tree from main
SELECT func_name, depth FROM call_graph
WHERE start = (SELECT addr FROM funcs WHERE name = 'main')
  AND direction = 'down' AND max_depth = 5;

-- All transitive callers
SELECT func_name, depth FROM call_graph
WHERE start = 0x405000 AND direction = 'up' AND max_depth = 10;

-- Bidirectional exploration
SELECT func_name, depth FROM call_graph
WHERE start = 0x401000 AND direction = 'both' AND max_depth = 3;

-- Join with string_refs to find strings reachable from a function
SELECT DISTINCT sr.string_value, sr.func_name
FROM call_graph cg
JOIN string_refs sr ON sr.func_addr = cg.func_addr
WHERE cg.start = 0x401000 AND cg.direction = 'down' AND cg.max_depth = 3;

-- Imported APIs reachable from a function's call tree
SELECT DISTINCT i.module, i.name as api
FROM call_graph cg
JOIN disasm_calls dc ON dc.func_addr = cg.func_addr
JOIN imports i ON dc.callee_addr = i.addr
WHERE cg.start = 0x401000 AND cg.direction = 'down' AND cg.max_depth = 5
ORDER BY i.module, i.name;

Performance: BFS with visited set. O(reachable functions). Always constrain hidden params. Use this pattern when the destination is an import.

shortest_path

Table-valued function for finding the shortest call path between two functions. Uses bidirectional BFS.

Column	Type	Description
`step`	INT	Step number in the path (0 = source)
`func_addr`	INT	Function address at this step
`func_name`	TEXT	Function name at this step
`from_addr`	INT	HIDDEN — Source function address
`to_addr`	INT	HIDDEN — Destination function address
`max_depth`	INT	HIDDEN — Maximum search depth

Always provide WHERE constraints for all 3 hidden parameters. Both endpoints must resolve to functions. Imported API addresses from imports are not valid shortest_path endpoints.

-- Find shortest call path between two functions
SELECT step, func_name FROM shortest_path
WHERE from_addr = (SELECT addr FROM funcs WHERE name = 'main')
  AND to_addr = (SELECT addr FROM funcs WHERE name = 'target_func')
  AND max_depth = 20;

-- Check reachability between two functions
SELECT COUNT(*) > 0 as reachable FROM shortest_path
WHERE from_addr = 0x401000 AND to_addr = 0x405000 AND max_depth = 20;

-- Annotate path steps with call count and string refs
SELECT sp.step, sp.func_name,
       (SELECT COUNT(*) FROM disasm_calls dc WHERE dc.func_addr = sp.func_addr) as calls_made,
       (SELECT COUNT(*) FROM string_refs sr WHERE sr.func_addr = sp.func_addr) as strings_used
FROM shortest_path sp
WHERE sp.from_addr = 0x401000 AND sp.to_addr = 0x405000 AND sp.max_depth = 20
ORDER BY sp.step;

Performance: Bidirectional BFS. O(b^(d/2)) where b is branching factor and d is path length. Returns empty result set if no path exists within max_depth.

Table-First Cross-Reference Queries

-- Incoming references to an address
SELECT from_addr, to_addr, type, is_code, from_func
FROM xrefs
WHERE to_addr = 0x401000;

-- Exact outgoing references from an item address
SELECT from_addr, to_addr, type, is_code, from_func
FROM xrefs
WHERE from_addr = 0x401000;

-- Outgoing references from anywhere inside a function
SELECT from_addr, to_addr, type, is_code, from_func
FROM xrefs
WHERE from_func = 0x401000;

grep

Use grep to resolve internal symbols, types, and members before doing relationship analysis. Use imports when the callee may exist only as an imported API. Canonical usage lives in ../grep/SKILL.md. For canonical schema and owner mapping, see ../connect/references/schema-catalog.md (grep).

-- Resolve internal functions with grep
SELECT name, kind, addr
FROM grep
WHERE pattern = 'main%' AND kind = 'function'
ORDER BY name;

-- Resolve imported APIs with imports
SELECT module, name, addr
FROM imports
WHERE name LIKE 'CreateFile%'
ORDER BY module, name;

-- Then pivot into callers/callees/xrefs
SELECT caller_name, printf('0x%X', caller_addr) AS from_addr
FROM callers
WHERE func_addr = (
    SELECT addr
    FROM imports
    WHERE name = 'CreateFileW'
    ORDER BY name
    LIMIT 1
);

Performance Rules

Constraint Pushdown

The xrefs table has optimized filters using efficient IDA SDK APIs:

Filter	Cost	Behavior
`to_addr = X`	0.5	O(xrefs to X) — fast, uses IDA's xref index
`from_addr = X`	0.5	O(xrefs from X) — fast, uses IDA's xref index
`from_func = X`	1.0	O(callees of X) — uses XrefsFromFuncIterator
No equality filter on `to_addr` / `from_addr` / `from_func`	—	Falls back to a cache of xrefs to function entry points only — avoid relying on it for complete import/data/non-function coverage

Always filter xrefs by to_addr, from_addr, or from_func. Avoid unconstrained scans.

-- FAST: xrefs to a specific target
SELECT * FROM xrefs WHERE to_addr = 0x401000;

-- FAST: xrefs from a specific source
SELECT * FROM xrefs WHERE from_addr = 0x401000;

-- FAST: all xrefs originating from a function
SELECT * FROM xrefs WHERE from_func = 0x401000;

-- INCOMPLETE/avoid: unconstrained scan falls back to a function-entry cache
SELECT * FROM xrefs WHERE is_code = 1;

Common Xref Patterns

Find Most Called Functions

SELECT f.name, COUNT(*) as caller_count
FROM funcs f
JOIN xrefs x ON f.addr = x.to_addr
WHERE x.is_code = 1
GROUP BY f.addr
ORDER BY caller_count DESC
LIMIT 10;

Find Functions Calling a Specific API

SELECT DISTINCT (SELECT name FROM funcs WHERE from_addr >= addr AND from_addr < end_addr LIMIT 1) as caller
FROM xrefs
WHERE to_addr = (SELECT addr FROM imports WHERE name = 'CreateFileW');

String Cross-Reference Analysis

SELECT s.content, (SELECT name FROM funcs WHERE x.from_addr >= addr AND x.from_addr < end_addr LIMIT 1) as used_by
FROM strings s
JOIN xrefs x ON s.addr = x.to_addr
WHERE s.content LIKE '%password%';

Import Dependency Map

-- Which modules does each function depend on?
SELECT f.name as func_name, i.module, COUNT(*) as api_count
FROM funcs f
JOIN disasm_calls dc ON dc.func_addr = f.addr
JOIN imports i ON dc.callee_addr = i.addr
GROUP BY f.addr, i.module
ORDER BY f.name, api_count DESC;

Data Section References

-- Functions referencing data sections
SELECT
    f.name,
    s.name as segment,
    COUNT(*) as data_refs
FROM funcs f
JOIN xrefs x ON x.from_addr BETWEEN f.addr AND f.end_addr
JOIN segments s ON x.to_addr BETWEEN s.start_addr AND s.end_addr
WHERE s.class = 'DATA' AND x.is_code = 0
GROUP BY f.addr, s.name
ORDER BY data_refs DESC
LIMIT 20;

Advanced Xref Patterns (CTEs and Recursive Queries)

Prefer call_graph over manual CTEs. The call_graph table uses C++ BFS with a visited set — correct BFS depths, no duplicate expansion on diamond-shaped call graphs, and early termination.

Before (recursive CTE — no visited tracking, exponential on diamond graphs):

WITH RECURSIVE call_chain(root, current_func, depth) AS (
    SELECT 0x401000, callee_addr, 1
    FROM disasm_calls WHERE func_addr = 0x401000
    UNION ALL
    SELECT cc.root, dc.callee_addr, cc.depth + 1
    FROM call_chain cc
    JOIN disasm_calls dc ON dc.func_addr = cc.current_func
    WHERE cc.depth < 10
)
SELECT DISTINCT current_func, MIN(depth) FROM call_chain GROUP BY current_func;

After (call_graph table — C++ BFS with visited set, correct depths):

SELECT func_addr, func_name, depth FROM call_graph
WHERE start = 0x401000 AND direction = 'down' AND max_depth = 10;

Recursive Call Graph — Forward Traversal

Note: For targeted traversal, prefer the call_graph table which uses C++ BFS with visited tracking. Use recursive CTEs only when you need custom join logic (e.g., filtering by callee properties at each step).

Find all functions reachable from a starting function (up to depth 5):

-- Preferred: use call_graph table
SELECT func_name, depth FROM call_graph
WHERE start = (SELECT addr FROM funcs WHERE name = 'main')
  AND direction = 'down' AND max_depth = 5;

-- Manual CTE (when custom filtering is needed at each step):
WITH RECURSIVE cg AS (
    SELECT addr as func_addr, name, 0 as depth
    FROM funcs WHERE name = 'main'

    UNION ALL

    SELECT f.addr, f.name, cg.depth + 1
    FROM cg
    JOIN disasm_calls dc ON dc.func_addr = cg.func_addr
    JOIN funcs f ON f.addr = dc.callee_addr
    WHERE cg.depth < 5
      AND dc.callee_addr != 0
)
SELECT DISTINCT func_addr, name, MIN(depth) as min_depth
FROM cg
GROUP BY func_addr
ORDER BY min_depth, name;

Recursive Call Graph — Reverse (Who Calls This?)

Note: For targeted traversal, prefer the call_graph table with direction = 'up'. Use recursive CTEs only when you need custom join logic.

Trace callers transitively up to depth 5:

-- Preferred: use call_graph table
SELECT func_name, depth FROM call_graph
WHERE start = 0x401000 AND direction = 'up' AND max_depth = 5;

-- Manual CTE (when custom filtering is needed at each step):
WITH RECURSIVE callers_cte AS (
    SELECT DISTINCT dc.func_addr, 1 as depth
    FROM disasm_calls dc
    WHERE dc.callee_addr = 0x401000

    UNION ALL

    SELECT DISTINCT dc.func_addr, c.depth + 1
    FROM callers_cte c
    JOIN disasm_calls dc ON dc.callee_addr = c.func_addr
    WHERE c.depth < 5
)
SELECT (SELECT name FROM funcs WHERE func_addr >= addr AND func_addr < end_addr LIMIT 1) as caller, MIN(depth) as distance
FROM callers_cte
GROUP BY func_addr
ORDER BY distance, caller;

CTE: Functions That Both Call malloc AND Check NULL

WITH malloc_callers AS (
    SELECT DISTINCT func_addr
    FROM disasm_calls
    WHERE callee_name LIKE '%malloc%'
),
null_checkers AS (
    SELECT DISTINCT func_addr
    FROM ctree_v_comparisons
    WHERE rhs_num = 0 AND op_name = 'cot_eq'
)
SELECT f.name
FROM funcs f
JOIN malloc_callers m ON f.addr = m.func_addr
JOIN null_checkers n ON f.addr = n.func_addr;

CTE: Memory Allocation Without Free (Potential Leaks)

WITH allocators AS (
    SELECT func_addr, COUNT(*) as alloc_count
    FROM disasm_calls
    WHERE callee_name LIKE '%alloc%' OR callee_name LIKE '%malloc%'
    GROUP BY func_addr
),
freers AS (
    SELECT func_addr, COUNT(*) as free_count
    FROM disasm_calls
    WHERE callee_name LIKE '%free%'
    GROUP BY func_addr
)
SELECT f.name,
       COALESCE(a.alloc_count, 0) as allocations,
       COALESCE(r.free_count, 0) as frees
FROM funcs f
LEFT JOIN allocators a ON f.addr = a.func_addr
LEFT JOIN freers r ON f.addr = r.func_addr
WHERE a.alloc_count > 0 AND COALESCE(r.free_count, 0) = 0
ORDER BY allocations DESC;

EXISTS: Functions With at Least One String Reference

More efficient than JOIN + DISTINCT for existence checks:

SELECT f.name
FROM funcs f
WHERE EXISTS (
    SELECT 1 FROM xrefs x
    JOIN strings s ON x.to_addr = s.addr
    WHERE x.from_addr BETWEEN f.addr AND f.end_addr
);

EXISTS: Leaf Functions (No Outgoing Calls)

SELECT f.name, f.size
FROM funcs f
WHERE NOT EXISTS (
    SELECT 1 FROM disasm_calls dc
    WHERE dc.func_addr = f.addr
)
ORDER BY f.size DESC;

Trigger Intents

Use this skill when user asks:

"Who calls this?" / "What does this call?"
"Where is this string/import referenced?"
"Show call graph dependencies."

Route to:

grep for candidate entity lookup by name/pattern before relationship analysis
analysis for broader triage context
decompiler for semantic interpretation after graph narrowing
disassembly for instruction-level call-site proof

Do This First (Warm-Start Sequence)

-- 1) Core relation volume
SELECT COUNT(*) AS xref_count FROM xrefs;

-- 2) Top imports (dependency hints)
SELECT module, COUNT(*) AS import_count
FROM imports
GROUP BY module
ORDER BY import_count DESC;

-- 3) Most called functions
SELECT printf('0x%X', to_addr) AS callee, COUNT(*) AS callers
FROM xrefs
WHERE is_code = 1
GROUP BY to_addr
ORDER BY callers DESC
LIMIT 20;

Interpretation guidance:

Use relation counts to prioritize hotspots before expensive deep analysis.
Prefer indexed filters (to_addr/from_addr) for fast response.

Failure and Recovery

Full-scan query too slow:
- Add to_addr = X or from_addr = X constraints.
Target unresolved by name:
- Resolve/verify address first through the names table or explicit EA literals.
Sparse results:
- Pivot through imports, strings, or disasm_calls joins.
Looking for references to a struct/union FIELD:
- Use struct_member_xrefs (filter by type_name/type_ordinal/member_id). Do NOT LIKE-scan instructions.disasm / instruction_operands.text for the field name — it is the slow, crash-adjacent pattern this table replaces.
Target lives inside a static struct or dispatch table:
- In modern binaries a string/data target is often referenced from a registration or vtable, not from code. xrefs WHERE to_addr = X may then return only .rdata rows. Walk back to the table head, then re-query xrefs against the table's address.
```
-- 1) find the head of the item that contains the target
SELECT addr FROM heads
WHERE addr <= 0x140027D50 ORDER BY addr DESC LIMIT 1;
-- 2) xrefs into the table head (where the code consumer points)
SELECT * FROM xrefs WHERE to_addr = <head> AND is_code = 1;
```

Handoff Patterns

xrefs -> decompiler for top candidate function semantics.
xrefs -> analysis for campaign-level synthesis.
xrefs -> annotations to persist relationship findings.

xrefs

Cross-references - the most important table for understanding code relationships.

Column	Type	Description
`from_addr`	INT	Source address (who references)
`to_addr`	INT	Target address (what is referenced)
`type`	INT	Xref type code (never the ordinary-flow code, see below)
`is_code`	INT	1=code xref (call/jump), 0=data xref
`from_func`	INT	Pre-computed containing function address (NULL when not in a function)

-- Who calls function at 0x401000?
SELECT printf('0x%X', from_addr) as caller FROM xrefs WHERE to_addr = 0x401000 AND is_code = 1;

-- What does function at 0x401000 reference?
SELECT printf('0x%X', to_addr) as target FROM xrefs WHERE from_addr >= 0x401000 AND from_addr < 0x401100;

struct_member_xrefs

Column	Type	Description
`type_ordinal` / `type_name`	INT/TEXT	Queried (top-level) type
`member_index`	INT	Leaf index within its immediate parent type
`member_name` / `member_path`	TEXT	Leaf name / dotted path (`payload.leaf.data`)
`member_offset` / `member_offset_bits`	INT	Cumulative offset within the queried type
`member_id`	INT	Member tid (also a filter key)
`xref_from`	INT	Referencing address
`xref_to`	INT	Member tid (== `member_id`)
`xref_type`	INT	Raw IDA xref type code
`xref_kind`	TEXT	`read` / `write` / `offset` / `call` / `jump` / `flow`
`function_addr` / `function_name`	INT/TEXT	Containing function (NULL if none)
`operand_index`	INT	Operand referencing the member (best-effort; NULL)
`instruction_text`	TEXT	Disasm line at `xref_from` (NULL if not an instruction)
`access_offset` / `access_size`	INT	Access sub-offset / width (best-effort; NULL)

-- Who writes _EH3_EXCEPTION_REGISTRATION.TryLevel?
SELECT member_path, xref_kind, function_name, instruction_text
FROM struct_member_xrefs
WHERE type_name = '_EH3_EXCEPTION_REGISTRATION' AND member_name = 'TryLevel';

-- All member references for a type (incl. nested), grouped by member
SELECT member_path, count(*) AS refs FROM struct_member_xrefs
WHERE type_ordinal = (SELECT ordinal FROM types WHERE name = 'db_entry_t')
GROUP BY member_path;

imports

Imported functions from external libraries.

Column	Type	Description
`addr`	INT	Import address (IAT entry)
`name`	TEXT	Import name
`module`	TEXT	Module/DLL name
`ordinal`	INT	Import ordinal
`folder_path`	TEXT	Writable import folder path
`full_path`	TEXT	Full import dirtree path

-- Imports from kernel32.dll
SELECT name FROM imports WHERE module LIKE '%kernel32%';

-- Organize network-related imports
UPDATE imports
SET folder_path = 'idasql/imports/network'
WHERE name LIKE '%socket%' OR name LIKE '%connect%' OR name LIKE '%send%';

Convenience Views

callers

Who calls each function. Caller names are resolved by the view from the funcs and names tables.

Column	Type	Description
`func_addr`	INT	Target function address
`caller_addr`	INT	Xref source address
`caller_name`	TEXT	Calling function name
`caller_func_addr`	INT	Calling function start (from `from_func`)

Underlying query:

SELECT x.to_addr as func_addr, x.from_addr as caller_addr,
       COALESCE((SELECT name FROM names WHERE addr = x.from_func LIMIT 1), printf('sub_%X', x.from_func)) as caller_name,
       x.from_func as caller_func_addr
FROM xrefs x WHERE x.is_code = 1 AND x.from_func != 0

-- Who calls function at 0x401000?
SELECT caller_name, printf('0x%X', caller_addr) as from_addr
FROM callers WHERE func_addr = 0x401000;

-- Most called functions
SELECT printf('0x%X', func_addr) as addr, COUNT(*) as callers
FROM callers GROUP BY func_addr ORDER BY callers DESC LIMIT 10;

callees

What each function calls. Inverse of callers view. Uses from_func for efficient function-level grouping.

Column	Type	Description
`func_addr`	INT	Calling function address (from `from_func`)
`func_name`	TEXT	Calling function name
`callee_addr`	INT	Called address
`callee_name`	TEXT	Called function/symbol name

-- What does main call?
SELECT callee_name, printf('0x%X', callee_addr) as addr
FROM callees WHERE func_name LIKE '%main%';

-- Functions making most calls
SELECT func_name, COUNT(*) as call_count
FROM callees GROUP BY func_addr ORDER BY call_count DESC LIMIT 10;

string_refs

Pre-joined view of string cross-references with containing function info.

Column	Type	Description
`string_addr`	INT	Address of the string
`string_value`	TEXT	String content
`string_length`	INT	String length
`ref_addr`	INT	Address of the referencing instruction
`func_addr`	INT	Containing function address
`func_name`	TEXT	Containing function name

-- Strings referenced by a specific function
SELECT string_value, func_name FROM string_refs WHERE func_addr = 0x401000;

-- Find functions referencing password-related strings
SELECT string_value, func_name FROM string_refs WHERE string_value LIKE '%password%';

-- Most referenced strings
SELECT string_value, COUNT(*) as ref_count
FROM string_refs GROUP BY string_addr ORDER BY ref_count DESC LIMIT 10;

data_refs

Cached table of data (non-code) cross-references with containing function info. Whole-program aggregates are supported.

Column	Type	Description
`from_addr`	INT	Source address of the reference
`to_addr`	INT	Target data address
`from_func_addr`	INT	Containing function address
`from_func_name`	TEXT	Containing function name
`ref_type`	INT	Xref type code

-- Data references from a specific function
SELECT * FROM data_refs WHERE from_func_addr = 0x401000;

-- Functions with most data references
SELECT from_func_name, COUNT(*) as data_ref_count
FROM data_refs GROUP BY from_func_addr ORDER BY data_ref_count DESC LIMIT 10;

call_graph

Table-valued function for BFS call graph traversal. Uses HIDDEN parameters for traversal control.

Column	Type	Description
`func_addr`	INT	Function address in the graph
`func_name`	TEXT	Function name
`depth`	INT	BFS depth from start
`parent_addr`	INT	Parent function address in the traversal
`start`	INT	HIDDEN — Starting function address
`direction`	TEXT	HIDDEN — `'down'` (callees), `'up'` (callers), or `'both'`
`max_depth`	INT	HIDDEN — Maximum traversal depth

Always provide WHERE constraints for all 3 hidden parameters.

-- Forward call tree from main
SELECT func_name, depth FROM call_graph
WHERE start = (SELECT addr FROM funcs WHERE name = 'main')
  AND direction = 'down' AND max_depth = 5;

-- All transitive callers
SELECT func_name, depth FROM call_graph
WHERE start = 0x405000 AND direction = 'up' AND max_depth = 10;

-- Bidirectional exploration
SELECT func_name, depth FROM call_graph
WHERE start = 0x401000 AND direction = 'both' AND max_depth = 3;

-- Join with string_refs to find strings reachable from a function
SELECT DISTINCT sr.string_value, sr.func_name
FROM call_graph cg
JOIN string_refs sr ON sr.func_addr = cg.func_addr
WHERE cg.start = 0x401000 AND cg.direction = 'down' AND cg.max_depth = 3;

-- Imported APIs reachable from a function's call tree
SELECT DISTINCT i.module, i.name as api
FROM call_graph cg
JOIN disasm_calls dc ON dc.func_addr = cg.func_addr
JOIN imports i ON dc.callee_addr = i.addr
WHERE cg.start = 0x401000 AND cg.direction = 'down' AND cg.max_depth = 5
ORDER BY i.module, i.name;

Performance: BFS with visited set. O(reachable functions). Always constrain hidden params. Use this pattern when the destination is an import.

shortest_path

Table-valued function for finding the shortest call path between two functions. Uses bidirectional BFS.

Column	Type	Description
`step`	INT	Step number in the path (0 = source)
`func_addr`	INT	Function address at this step
`func_name`	TEXT	Function name at this step
`from_addr`	INT	HIDDEN — Source function address
`to_addr`	INT	HIDDEN — Destination function address
`max_depth`	INT	HIDDEN — Maximum search depth

Always provide WHERE constraints for all 3 hidden parameters. Both endpoints must resolve to functions. Imported API addresses from imports are not valid shortest_path endpoints.

-- Find shortest call path between two functions
SELECT step, func_name FROM shortest_path
WHERE from_addr = (SELECT addr FROM funcs WHERE name = 'main')
  AND to_addr = (SELECT addr FROM funcs WHERE name = 'target_func')
  AND max_depth = 20;

-- Check reachability between two functions
SELECT COUNT(*) > 0 as reachable FROM shortest_path
WHERE from_addr = 0x401000 AND to_addr = 0x405000 AND max_depth = 20;

-- Annotate path steps with call count and string refs
SELECT sp.step, sp.func_name,
       (SELECT COUNT(*) FROM disasm_calls dc WHERE dc.func_addr = sp.func_addr) as calls_made,
       (SELECT COUNT(*) FROM string_refs sr WHERE sr.func_addr = sp.func_addr) as strings_used
FROM shortest_path sp
WHERE sp.from_addr = 0x401000 AND sp.to_addr = 0x405000 AND sp.max_depth = 20
ORDER BY sp.step;

Performance: Bidirectional BFS. O(b^(d/2)) where b is branching factor and d is path length. Returns empty result set if no path exists within max_depth.

Table-First Cross-Reference Queries

-- Incoming references to an address
SELECT from_addr, to_addr, type, is_code, from_func
FROM xrefs
WHERE to_addr = 0x401000;

-- Exact outgoing references from an item address
SELECT from_addr, to_addr, type, is_code, from_func
FROM xrefs
WHERE from_addr = 0x401000;

-- Outgoing references from anywhere inside a function
SELECT from_addr, to_addr, type, is_code, from_func
FROM xrefs
WHERE from_func = 0x401000;

grep

-- Resolve internal functions with grep
SELECT name, kind, addr
FROM grep
WHERE pattern = 'main%' AND kind = 'function'
ORDER BY name;

-- Resolve imported APIs with imports
SELECT module, name, addr
FROM imports
WHERE name LIKE 'CreateFile%'
ORDER BY module, name;

-- Then pivot into callers/callees/xrefs
SELECT caller_name, printf('0x%X', caller_addr) AS from_addr
FROM callers
WHERE func_addr = (
    SELECT addr
    FROM imports
    WHERE name = 'CreateFileW'
    ORDER BY name
    LIMIT 1
);

Performance Rules

Constraint Pushdown

The xrefs table has optimized filters using efficient IDA SDK APIs:

Filter	Cost	Behavior
`to_addr = X`	0.5	O(xrefs to X) — fast, uses IDA's xref index
`from_addr = X`	0.5	O(xrefs from X) — fast, uses IDA's xref index
`from_func = X`	1.0	O(callees of X) — uses XrefsFromFuncIterator
No equality filter on `to_addr` / `from_addr` / `from_func`	—	Falls back to a cache of xrefs to function entry points only — avoid relying on it for complete import/data/non-function coverage

Always filter xrefs by to_addr, from_addr, or from_func. Avoid unconstrained scans.

-- FAST: xrefs to a specific target
SELECT * FROM xrefs WHERE to_addr = 0x401000;

-- FAST: xrefs from a specific source
SELECT * FROM xrefs WHERE from_addr = 0x401000;

-- FAST: all xrefs originating from a function
SELECT * FROM xrefs WHERE from_func = 0x401000;

-- INCOMPLETE/avoid: unconstrained scan falls back to a function-entry cache
SELECT * FROM xrefs WHERE is_code = 1;

Common Xref Patterns

Find Most Called Functions

SELECT f.name, COUNT(*) as caller_count
FROM funcs f
JOIN xrefs x ON f.addr = x.to_addr
WHERE x.is_code = 1
GROUP BY f.addr
ORDER BY caller_count DESC
LIMIT 10;

Find Functions Calling a Specific API

SELECT DISTINCT (SELECT name FROM funcs WHERE from_addr >= addr AND from_addr < end_addr LIMIT 1) as caller
FROM xrefs
WHERE to_addr = (SELECT addr FROM imports WHERE name = 'CreateFileW');

String Cross-Reference Analysis

SELECT s.content, (SELECT name FROM funcs WHERE x.from_addr >= addr AND x.from_addr < end_addr LIMIT 1) as used_by
FROM strings s
JOIN xrefs x ON s.addr = x.to_addr
WHERE s.content LIKE '%password%';

Import Dependency Map

-- Which modules does each function depend on?
SELECT f.name as func_name, i.module, COUNT(*) as api_count
FROM funcs f
JOIN disasm_calls dc ON dc.func_addr = f.addr
JOIN imports i ON dc.callee_addr = i.addr
GROUP BY f.addr, i.module
ORDER BY f.name, api_count DESC;

Data Section References

-- Functions referencing data sections
SELECT
    f.name,
    s.name as segment,
    COUNT(*) as data_refs
FROM funcs f
JOIN xrefs x ON x.from_addr BETWEEN f.addr AND f.end_addr
JOIN segments s ON x.to_addr BETWEEN s.start_addr AND s.end_addr
WHERE s.class = 'DATA' AND x.is_code = 0
GROUP BY f.addr, s.name
ORDER BY data_refs DESC
LIMIT 20;

Advanced Xref Patterns (CTEs and Recursive Queries)

Prefer call_graph over manual CTEs. The call_graph table uses C++ BFS with a visited set — correct BFS depths, no duplicate expansion on diamond-shaped call graphs, and early termination.

Before (recursive CTE — no visited tracking, exponential on diamond graphs):

WITH RECURSIVE call_chain(root, current_func, depth) AS (
    SELECT 0x401000, callee_addr, 1
    FROM disasm_calls WHERE func_addr = 0x401000
    UNION ALL
    SELECT cc.root, dc.callee_addr, cc.depth + 1
    FROM call_chain cc
    JOIN disasm_calls dc ON dc.func_addr = cc.current_func
    WHERE cc.depth < 10
)
SELECT DISTINCT current_func, MIN(depth) FROM call_chain GROUP BY current_func;

After (call_graph table — C++ BFS with visited set, correct depths):

SELECT func_addr, func_name, depth FROM call_graph
WHERE start = 0x401000 AND direction = 'down' AND max_depth = 10;

Recursive Call Graph — Forward Traversal

Note: For targeted traversal, prefer the call_graph table which uses C++ BFS with visited tracking. Use recursive CTEs only when you need custom join logic (e.g., filtering by callee properties at each step).

Find all functions reachable from a starting function (up to depth 5):

-- Preferred: use call_graph table
SELECT func_name, depth FROM call_graph
WHERE start = (SELECT addr FROM funcs WHERE name = 'main')
  AND direction = 'down' AND max_depth = 5;

-- Manual CTE (when custom filtering is needed at each step):
WITH RECURSIVE cg AS (
    SELECT addr as func_addr, name, 0 as depth
    FROM funcs WHERE name = 'main'

    UNION ALL

    SELECT f.addr, f.name, cg.depth + 1
    FROM cg
    JOIN disasm_calls dc ON dc.func_addr = cg.func_addr
    JOIN funcs f ON f.addr = dc.callee_addr
    WHERE cg.depth < 5
      AND dc.callee_addr != 0
)
SELECT DISTINCT func_addr, name, MIN(depth) as min_depth
FROM cg
GROUP BY func_addr
ORDER BY min_depth, name;

Recursive Call Graph — Reverse (Who Calls This?)

Note: For targeted traversal, prefer the call_graph table with direction = 'up'. Use recursive CTEs only when you need custom join logic.

Trace callers transitively up to depth 5:

-- Preferred: use call_graph table
SELECT func_name, depth FROM call_graph
WHERE start = 0x401000 AND direction = 'up' AND max_depth = 5;

-- Manual CTE (when custom filtering is needed at each step):
WITH RECURSIVE callers_cte AS (
    SELECT DISTINCT dc.func_addr, 1 as depth
    FROM disasm_calls dc
    WHERE dc.callee_addr = 0x401000

    UNION ALL

    SELECT DISTINCT dc.func_addr, c.depth + 1
    FROM callers_cte c
    JOIN disasm_calls dc ON dc.callee_addr = c.func_addr
    WHERE c.depth < 5
)
SELECT (SELECT name FROM funcs WHERE func_addr >= addr AND func_addr < end_addr LIMIT 1) as caller, MIN(depth) as distance
FROM callers_cte
GROUP BY func_addr
ORDER BY distance, caller;

CTE: Functions That Both Call malloc AND Check NULL

WITH malloc_callers AS (
    SELECT DISTINCT func_addr
    FROM disasm_calls
    WHERE callee_name LIKE '%malloc%'
),
null_checkers AS (
    SELECT DISTINCT func_addr
    FROM ctree_v_comparisons
    WHERE rhs_num = 0 AND op_name = 'cot_eq'
)
SELECT f.name
FROM funcs f
JOIN malloc_callers m ON f.addr = m.func_addr
JOIN null_checkers n ON f.addr = n.func_addr;

CTE: Memory Allocation Without Free (Potential Leaks)

WITH allocators AS (
    SELECT func_addr, COUNT(*) as alloc_count
    FROM disasm_calls
    WHERE callee_name LIKE '%alloc%' OR callee_name LIKE '%malloc%'
    GROUP BY func_addr
),
freers AS (
    SELECT func_addr, COUNT(*) as free_count
    FROM disasm_calls
    WHERE callee_name LIKE '%free%'
    GROUP BY func_addr
)
SELECT f.name,
       COALESCE(a.alloc_count, 0) as allocations,
       COALESCE(r.free_count, 0) as frees
FROM funcs f
LEFT JOIN allocators a ON f.addr = a.func_addr
LEFT JOIN freers r ON f.addr = r.func_addr
WHERE a.alloc_count > 0 AND COALESCE(r.free_count, 0) = 0
ORDER BY allocations DESC;

EXISTS: Functions With at Least One String Reference

More efficient than JOIN + DISTINCT for existence checks:

SELECT f.name
FROM funcs f
WHERE EXISTS (
    SELECT 1 FROM xrefs x
    JOIN strings s ON x.to_addr = s.addr
    WHERE x.from_addr BETWEEN f.addr AND f.end_addr
);

EXISTS: Leaf Functions (No Outgoing Calls)

SELECT f.name, f.size
FROM funcs f
WHERE NOT EXISTS (
    SELECT 1 FROM disasm_calls dc
    WHERE dc.func_addr = f.addr
)
ORDER BY f.size DESC;

name	xrefs
description	Analyze IDA cross-references. Use when asked about callers, callees, imports, data refs, call graphs, or dependency chains.
metadata	{"argument-hint":"[function-name or address]"}
allowed-tools	["Bash","Read","Glob","Grep"]

name	xrefs
description	Analyze IDA cross-references. Use when asked about callers, callees, imports, data refs, call graphs, or dependency chains.
metadata	{"argument-hint":"[function-name or address]"}
allowed-tools	["Bash","Read","Glob","Grep"]

xrefs

이 저장소의 다른 Skills

이 저장소의 다른 Skills

Trigger Intents

Do This First (Warm-Start Sequence)

Failure and Recovery

Handoff Patterns

xrefs

struct_member_xrefs

imports

Convenience Views

callers

callees

string_refs

data_refs

call_graph

shortest_path

Table-First Cross-Reference Queries

grep

Performance Rules

Constraint Pushdown

Common Xref Patterns

Find Most Called Functions

Find Functions Calling a Specific API

String Cross-Reference Analysis

Import Dependency Map

Data Section References

Advanced Xref Patterns (CTEs and Recursive Queries)

Recursive Call Graph — Forward Traversal

Recursive Call Graph — Reverse (Who Calls This?)

CTE: Functions That Both Call malloc AND Check NULL

CTE: Memory Allocation Without Free (Potential Leaks)

EXISTS: Functions With at Least One String Reference

EXISTS: Leaf Functions (No Outgoing Calls)

See Also

Trigger Intents

Do This First (Warm-Start Sequence)

Failure and Recovery

Handoff Patterns

xrefs

struct_member_xrefs

imports

Convenience Views

callers

callees

string_refs

data_refs

call_graph

shortest_path

Table-First Cross-Reference Queries

grep

Performance Rules

Constraint Pushdown

Common Xref Patterns

Find Most Called Functions

Find Functions Calling a Specific API

String Cross-Reference Analysis

Import Dependency Map

Data Section References

Advanced Xref Patterns (CTEs and Recursive Queries)

Recursive Call Graph — Forward Traversal

Recursive Call Graph — Reverse (Who Calls This?)

CTE: Functions That Both Call malloc AND Check NULL

CTE: Memory Allocation Without Free (Potential Leaks)

EXISTS: Functions With at Least One String Reference

EXISTS: Leaf Functions (No Outgoing Calls)

See Also