aid-config

name	aid-config
description	View or update AID pipeline settings. Bare invocation shows all values in a table; first run auto-creates .aid/settings.yml from the template. Pass a key (e.g., /aid-config name) to view + update one setting interactively.
allowed-tools	Read, Glob, Grep, Terminal, Write, Edit, AskUserQuestion
argument-hint	(none) view all | <key> view+update one (e.g., name, minimum_grade)

AID Project Configuration

/aid-config reads and writes .aid/settings.yml — the single source of truth for AID pipeline settings (grades, heartbeat, project identity).

Two modes, nothing else.

Invocation	What it does
/aid-config	Show all settings as a table. On first run (no settings.yml), copy the template into place first, then show.
/aid-config <key>	Show the current value of <key>; prompt for new (with suggestions + always a free-form option); validate; write in place.

Examples: /aid-config name, /aid-config minimum_grade, /aid-config source_control.

---

Pre-flight

• ✅ Default or Auto-accept edits → proceed
• ❌ Plan mode → STOP. This skill writes files.

---

Mode 1 — Show all settings (/aid-config)

Step 1: Ensure .aid/settings.yml exists

If .aid/settings.yml is missing:

• Create .aid/ directory if absent (do NOT touch .aid/knowledge/ or other subdirs).
• Copy .cursor/aid/templates/settings.yml → .aid/settings.yml verbatim.
• Print: Created .aid/settings.yml from template.

Step 2: Render the table

Read .aid/settings.yml. Print a table with these columns: Key | Value

Order: name, description, type, source_control, minimum_grade, heartbeat_interval.

If any value matches a <placeholder> pattern (e.g., <project-name>), append ⚠ unset after the value.

Step 3: Suggest commands for unset values + the general update form

After the table, ALWAYS print the line:

Run /aid-config <key> to update any value.

If ANY rows were marked ⚠ unset, ALSO emit a copy-pasteable command per unset row, so the user can act without having to assemble the key themselves:

N values unset. To set them:
  /aid-config name
  /aid-config description

Exit. No prompt; no further interaction.

---

Mode 2 — View/update one key (/aid-config <key>)

Step 1: Validate the key argument

Accepted keys:

• name
• description
• type
• source_control
• minimum_grade
• heartbeat_interval

If the key doesn't match: print ❌ Unknown key: <key> + the accepted list + exit.

Step 2: Ensure .aid/settings.yml exists

Same as Mode 1 Step 1.

Step 3: Read current value

Run:

bash .cursor/aid/scripts/config/read-setting.sh --path <key> --default '(unset)'

Print: Current value of <key>: <value>.

Step 4: Prompt for new value

Use AskUserQuestion for ALL keys with:

• A Keep current value option (description: shows the current value)
• 2–3 suggestion options from the Suggestions table below

Each option has only label + description. Do NOT use the preview field — the preview field switches the UI to a side-by-side layout that suppresses the auto-injected Other free-text input. With description only, the standard layout shows the Other field automatically and the user can always type a custom value.

Do NOT add an explicit Other option in the options list — the tool injects it automatically (and only renders it correctly when no option carries a preview).

For free-text-natural keys (name, description), the Suggestions table says (no defaults) — render the question with just Keep current value + the auto-injected Other field; the user types their value into Other.

Question text format (keep brief, mention free-text via Other if the user might want it):

New value for <key>?  (pick a suggestion or type your own via 'Other')

Step 5: Validate

Per the Validation table below. If invalid: print the validation error + re-prompt (loop back to Step 4).

Step 6: Save in place

Read .aid/settings.yml into memory. settings.yml is a flat file — every user-editable key is a top-level scalar (<key>: <value>), no section nesting. Replace the top-level line for <key> if one is present; otherwise append a new top-level <key>: <value> line at the end of the file. Preserve all other lines and inline comments exactly as they are. Use a same-directory temp file + mv -f for crash-safety (POSIX atomic rename), but no lock-dir mutex — aid-config is interactive single-user; concurrent writes are not a real failure mode.

Step 7: Confirm

Print: ✓ <key>: <old> → <new> and exit.

---

Validation table

Key	Valid values
name	Non-empty string, no whitespace
description	Non-empty single-line string (NO newlines — settings.yml uses inline YAML scalars)
type	brownfield or greenfield
source_control	none, git, svn, or mercurial
minimum_grade	Regex ^[A-F][+-]?$. E-grades are accepted but rarely useful as a floor.
heartbeat_interval	Positive integer (minutes). 0 disables heartbeat.

---

Internal keys (producer-written — NOT user-configurable)

/aid-config deliberately does not expose these — they are absent from Accepted keys (Mode 2 Step 1) and from the Validation table above. They are written and maintained by pipeline producers, never by the user. Running /aid-config knowledge (or any knowledge.* sub-path) is rejected as an unknown key (❌ Unknown key) — that is the intended behavior, not a gap.

Key

Owner / contract

knowledge

Nested block {source: <default-branch>, last_update: <ISO-8601 commit date>, doc_set: [...], term_exclusions: [...]}. knowledge.source (the branch compared for KB freshness) and knowledge.last_update are written by aid-discover (on KB approval, FR35) and aid-housekeep (re-stamp on KB-DELTA refresh, FR36); read by the dashboard reader for outdated-detection (feature-007 FF-A2). knowledge.doc_set and knowledge.term_exclusions are runtime-written by aid-discover. Absence-tolerant — a missing knowledge block means "no baseline recorded" and the reader stays approved. Producer write-path (R13): the first write is a multi-line nested block (source: + last_update: + doc_set: + term_exclusions:) via the append-block idiom; a later last_update re-stamp is a single-line replace of that nested line.

---

Suggestions table (for Mode 2 AskUserQuestion)

Key	Suggestions
name	(no defaults — user types their own)
description	(no defaults — user types their own)
type	brownfield, greenfield
source_control	none, git, svn, mercurial
minimum_grade	A+, A, B+
heartbeat_interval	0 (disabled), 1, 5

Always include a Keep current value option and let AskUserQuestion's built-in Other field handle free-form input.

---

How consumer skills read settings

Consumer skills (/aid-discover, /aid-execute, etc.) resolve minimum_grade using this order:

1. minimum_grade in .aid/settings.yml — use if present
2. Hardcoded skill default — use only if .aid/settings.yml is missing entirely, or the key is unset

The canonical resolution helper is .cursor/aid/scripts/config/read-setting.sh. Consumer skills invoke:

bash .cursor/aid/scripts/config/read-setting.sh --key minimum_grade --default A

---

Schema reference

Canonical schema: .cursor/aid/templates/settings.yml. Flat top-level scalar keys (name, description, type, source_control, minimum_grade, heartbeat_interval) as described in the tables above. The knowledge: block is producer-written — see Internal keys above, not user-configurable via this skill.