원클릭으로 Manus에서 모든 스킬 실행

swpilotcli-feature-hole-wizard-straight-tap

스타23

포크2

업데이트2026년 4월 30일 03:46

Create a HoleWizard ISO Straight Tap feature on a specified face at one or more positions. Selects the face programmatically by world coordinates — no manual pre-selection required. Supports any metric size (M3–M12), blind depth in mm, or through-all. Use when the user asks to add tapped holes, M-size threaded holes, or straight taps to a face.

설치

Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.

Manus에서 실행

출처

arthurle3210

arthurle3210/SwpilotCLI

GitHub 저장소 열기 Creator 저장소 보기

다운로드

Manus에서 실행

swpilotcli-feature-hole-wizard-straight-tap

Create a SolidWorks HoleWizard ISO Straight Tap feature at one or more positions on a specified face.

Prerequisites

SolidWorks is running with an active Part document
No sketch should be active (tool manages its own sketch context)

Usage

dotnet run --project ./sup_tools/swpilotcli-feature-hole-wizard-straight-tap/scripts/HoleWizardStraightTap/HoleWizardStraightTap.csproj -- <size> <depth> <face_x,face_y,face_z> <x1,y1;x2,y2;...>

Arguments

Arg	Description
`size`	Metric tap size: `M3` `M4` `M5` `M6` `M8` `M10` `M12`
`depth`	Depth in mm (e.g. `12`) or `through_all`
`face_x,face_y,face_z`	World coordinates (mm) of any point on the target face
`x1,y1;x2,y2;...`	Hole positions (mm) in the face's sketch coordinate system

Examples

# 4× M6 through-all taps on top face at Z=10mm
dotnet run ... -- M6 through_all "20,10,5" "-10.6,-11.65;10.6,-11.65;-10.6,11.65;10.6,11.65"

# 4× M3 through-all taps, positions symmetric about face centre (25,20)
dotnet run ... -- M3 through_all "25,10,-20" "20,10;30,10;20,30;30,30"

# Single M8 blind 15mm tap
dotnet run ... -- M8 15 "0,50,0" "0,0"

How it works

Selects the target face using the provided world coordinates
Calls HoleWizard5 with face only → creates feature with one default position
Enters the internal position sketch, deletes the default point
Adds points at the specified positions
Exits sketch and rebuilds

Finding face coordinates

Use the DiagFaces helper or read geometry directly. The face coordinate (fx, fy, fz) must lie on the face surface — avoid points inside holes or on edges.

Tap drill diameters (ISO metric, mm)

Size	Tap drill
M3	2.5 mm
M4	3.3 mm
M5	4.2 mm
M6	5.0 mm
M8	6.7 mm
M10	8.5 mm
M12	10.2 mm

Notes

Positions are in face sketch coordinates (not world coordinates)
Face sketch axes depend on face orientation — use DiagFaces to inspect if unsure
For Top Plane (上基準面) faces: sketch X = world X, sketch Y = world −Z
For Front Plane (前基準面) faces: sketch X = world X, sketch Y = world Y

이 저장소의 다른 Skills

같은 저장소

swpilotcli-active-doc-info

arthurle3210/SwpilotCLI

Get information about the currently open SolidWorks document (part, assembly, or drawing). Use when you need to check document properties, file path, document type, or current state without modifying it.

2026-04-3023

swpilotcli-eye-screenshot

arthurle3210/SwpilotCLI

YOUR EYES. Use this tool whenever you need to see the screen — do NOT say you cannot see or take screenshots. Run this first, then use the Read tool on ./temp/screenshot/screenshot.png to view the image. Use when: user asks what is on screen, you want to verify code execution results, or you need visual context before deciding next steps.

2026-04-3023

swpilotcli-actiongroup-replace-notes

arthurle3210/SwpilotCLI

"[ActionGroup] Batch replace text inside Note annotations across all SolidWorks drawings (.slddrw) in a specified folder (root only)." For each drawing, opens it silently, finds all Notes containing the search text, replaces every occurrence, saves a copy with a custom suffix to a specified output folder, then closes the original without saving. Reports which files were changed and how many notes were replaced per file. Use when you need to find-and-replace note text across multiple drawings in one shot.

2026-04-3023

swpilotcli-batch-xt-to-step

arthurle3210/SwpilotCLI

Batch convert Parasolid `.x_t` and `.xt` files in a specified folder to STEP `.step` files in the same folder. Scans the folder root only, creates same-name `.step` outputs, suppresses template-selection prompts by forcing default part templates, and closes each temporary import document after export. Use when you need one-shot XT to STEP conversion for a local folder.

2026-04-3023

swpilotcli-check-dangling-dims

arthurle3210/SwpilotCLI

Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.

2026-04-3023

swpilotcli-close-doc

arthurle3210/SwpilotCLI

Close SolidWorks document(s). Supports three modes via argument: no argument or "nosave" closes the active document without saving; "save" silently saves then closes the active document (if file has never been saved, forces close without saving); "all" closes every open document without saving. Use when the user wants to close the current file, close and save, or close everything.

2026-04-3023

name	swpilotcli-feature-hole-wizard-straight-tap
description	Create a HoleWizard ISO Straight Tap feature on a specified face at one or more positions. Selects the face programmatically by world coordinates — no manual pre-selection required. Supports any metric size (M3–M12), blind depth in mm, or through-all. Use when the user asks to add tapped holes, M-size threaded holes, or straight taps to a face.

swpilotcli-feature-hole-wizard-straight-tap

Create a SolidWorks HoleWizard ISO Straight Tap feature at one or more positions on a specified face.

Prerequisites

SolidWorks is running with an active Part document
No sketch should be active (tool manages its own sketch context)

Usage

dotnet run --project ./sup_tools/swpilotcli-feature-hole-wizard-straight-tap/scripts/HoleWizardStraightTap/HoleWizardStraightTap.csproj -- <size> <depth> <face_x,face_y,face_z> <x1,y1;x2,y2;...>

Arguments

Arg	Description
`size`	Metric tap size: `M3` `M4` `M5` `M6` `M8` `M10` `M12`
`depth`	Depth in mm (e.g. `12`) or `through_all`
`face_x,face_y,face_z`	World coordinates (mm) of any point on the target face
`x1,y1;x2,y2;...`	Hole positions (mm) in the face's sketch coordinate system

Examples

# 4× M6 through-all taps on top face at Z=10mm
dotnet run ... -- M6 through_all "20,10,5" "-10.6,-11.65;10.6,-11.65;-10.6,11.65;10.6,11.65"

# 4× M3 through-all taps, positions symmetric about face centre (25,20)
dotnet run ... -- M3 through_all "25,10,-20" "20,10;30,10;20,30;30,30"

# Single M8 blind 15mm tap
dotnet run ... -- M8 15 "0,50,0" "0,0"

How it works

Selects the target face using the provided world coordinates
Calls HoleWizard5 with face only → creates feature with one default position
Enters the internal position sketch, deletes the default point
Adds points at the specified positions
Exits sketch and rebuilds

Finding face coordinates

Use the DiagFaces helper or read geometry directly. The face coordinate (fx, fy, fz) must lie on the face surface — avoid points inside holes or on edges.

Tap drill diameters (ISO metric, mm)

Size	Tap drill
M3	2.5 mm
M4	3.3 mm
M5	4.2 mm
M6	5.0 mm
M8	6.7 mm
M10	8.5 mm
M12	10.2 mm

Notes

Positions are in face sketch coordinates (not world coordinates)
Face sketch axes depend on face orientation — use DiagFaces to inspect if unsure
For Top Plane (上基準面) faces: sketch X = world X, sketch Y = world −Z
For Front Plane (前基準面) faces: sketch X = world X, sketch Y = world Y