메뉴
Release a new version of the FLOW plugin. Bumps version in plugin.json and marketplace.json, commits, tags, pushes, and creates a GitHub Release.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
SOC 직업 분류 기준
Abort the current FLOW feature. Closes the PR, deletes the remote branch, removes the worktree, and deletes the state file. Available from any phase. The confirmation prompt is governed by the skills.flow-abort config in the state file.
Phase 2: Code — execute plan tasks one at a time with TDD. Review diff before each commit. bin/flow ci must pass before moving to the next task. Project architecture standards enforced.
Review the full diff, then git add + commit + push. Use at every commit checkpoint in the FLOW workflow.
Phase 4: Complete — merge the PR, remove the worktree, and delete the state file. Final phase.
Clear the autonomous-flow halt set when the user spoke mid-flow. Invokes `bin/flow clear-halt` so the next assistant turn resumes execution. User-only: the model cannot invoke this skill.
Full codebase documentation accuracy review — reports drift between code behavior and documentation.
| name | flow-release |
| description | Release a new version of the FLOW plugin. Bumps version in plugin.json and marketplace.json, commits, tags, pushes, and creates a GitHub Release. |
Release a new version of the FLOW plugin. Maintainer-only — requires push access to the repo.
Print:
```text
──────────────────────────────────────────────────
FLOW v2.7.0 — release — STARTING
──────────────────────────────────────────────────
```
Default (no flags): Auto-detect version, display version and release notes, then proceed directly from Step 4 to Step 5.
--auto: Same as default (explicit flag for clarity).
--manual: Pause at Step 4 for approval before bumping. Serves as a dry-run — deny at the prompt to stop.
Run both in parallel (one response, two Bash calls):
git status
git pull origin main
If git status shows uncommitted changes, stop:
"There are uncommitted changes. Commit or stash them before releasing."
If git pull produced changes, warn the user that new commits were pulled.
Run git describe and the two Reads in parallel (one response, one Bash call + two Reads):
git describe --tags --abbrev=0
Also use the Read tool to read .claude-plugin/plugin.json and RELEASE-NOTES.md.
If git describe fails (no tags exist), set <last_tag> to HEAD~20.
Then verify CI on main is green and finished for the current HEAD. Use a
10-minute Bash tool timeout (timeout: 600000) — wait-for-release-ci
blocks until the latest main run reaches a terminal conclusion (polling
for up to ~8 minutes), and the default 2-minute timeout would background
the process, defeating the wait (per .claude/rules/ci-is-a-gate.md).
bin/flow wait-for-release-ci --base main
Parse the JSON output and branch on status:
"ready" → CI finished for the current HEAD. Check conclusion:
"success" → proceed"failure", "cancelled", or any other terminal conclusion → stop: "CI failed on main. Fix tests before releasing.""still_pending" → CI did not finish within the cap. Re-run the single bin/flow wait-for-release-ci --base main line above (again with the 10-minute Bash tool timeout) until it returns ready."error" → show the message and stop. The latest run may be for a different commit (CI has not run on the latest commit yet), there may be no runs yet, or gh/git failed.git log --oneline <last_tag>..HEAD
Display the commit list. This is what goes into the release.
Do not stop here. The tag name matching the current version does NOT mean there is nothing to release — the tag may point to an older commit.
Only if the commit list is empty (no output from git log), stop:
"Nothing to release — HEAD is already tagged as
<last_tag>."
Analyze the commit list from Step 3 and recommend a release type using these rules (apply the highest that matches):
Then draft the release notes section:
```text
## v<new_version> — <short description>
<Summary of what changed — written from the commit list in Step 3.
Group by: new features, fixes, improvements. Be concise.>
```
Present the recommendation and the draft release notes in your response.
If --manual was explicitly passed, use one AskUserQuestion:
"I recommend (v<new_version>) — . Release notes are above. Approve this release?"
- Approve (Recommended)
- Different version — specify in Other
- Notes need changes — describe in Other
Unless --manual was explicitly passed, proceed directly to Step 5.
Run both in parallel (one response, one Bash call + one Edit):
make bump NEW=<new_version>
Also Edit RELEASE-NOTES.md — add the release notes section from Step 4 at the
top (below the # Release Notes heading).
The bump updates .claude-plugin/plugin.json, .claude-plugin/marketplace.json,
and all skill banners in one step.
Config and setup hashes are not stored in plugin.json — they are computed
dynamically by compute_config_hash() and compute_setup_hash() in
src/prime_setup.rs at prime time and compared at start time by
src/prime_check.rs. No manual hash updates are needed during releases.
The committed binary at bin/flow-rs-darwin-arm64 ships to end users
through the marketplace cache — /plugin install copies it into place so
a fresh install needs no build step. It must be regenerated from source
at every release so its bytes match the tagged source generation; a
stale binary would run an older FLOW than the release claims.
bin/setup --stage-binary builds the release binary and moves it to
the committed path in one step. The move (rather than a copy) leaves
no source artifact at target/release/flow-rs after staging — a
leftover would sit at higher dispatcher precedence than the committed
binary at bin/flow-rs-darwin-arm64 and shadow source changes during
--plugin-dir QA on a session that runs without rebuilding (see
bin/flow lines 27-33: the dispatcher prefers target/release over
the committed binary by existence priority, not mtime). The compiler
and the move both run inside that script, which keeps them off the
FLOW Bash allow-list surface — invoking the Rust toolchain or mv
directly is permission-denied. The staging is idempotent: invoking
--stage-binary after a prior successful staging (no fresh build
output) leaves the committed binary in place rather than failing.
Use a 10-minute Bash tool timeout (timeout: 600000) — a cold
release build can take several minutes and the default 2-minute
timeout would background the process.
bin/setup --stage-binary
After bin/setup --stage-binary, bin/flow-rs-darwin-arm64 is
refreshed in the working tree with the executable bit set, so the
git add -A in Step 7 stages the fresh bytes at mode 100755.
git add -A
Write Release v<new_version> to .flow-commit-msg via the Write tool.
Step 7's git add -A ran before this write, so it never staged the
message file, and finalize-commit's internal re-stage uses git add -u
(tracked files only), which skips the untracked .flow-commit-msg — that
stage-before-write ordering is what keeps it out of the commit.
EXCLUDE_ENTRIES additionally hides it from git status once the project
re-primes, and finalize-commit deletes it on every exit so a stale file
never pre-exists a retry.
Then finalize the commit in one call. finalize-commit runs
ci::run_impl() before git commit (see CLAUDE.md "CI is enforced
inside finalize-commit itself"), so use a 10-minute Bash tool
timeout (timeout: 600000) — CI runs can take 3–4 minutes and the
default 2-minute timeout would background the process, defeating
the gate (per .claude/rules/ci-is-a-gate.md).
bin/flow finalize-commit main
No diff review. No bin/ci. No approval prompt — CI was verified in
Step 2, changes were shown in Step 3, and version was confirmed in Step 4.
First, run both in parallel (one response, two Bash calls):
git tag v<new_version>
bin/flow extract-release-notes v<new_version>
The extract writes tmp/release-notes-v<new_version>.md.
Then run both in parallel (one response, two Bash calls):
gh release create v<new_version> --title "v<new_version>" --notes-file tmp/release-notes-v<new_version>.md
claude plugin marketplace update flow-marketplace
gh release create pushes the tag to the remote automatically — no separate
git push origin needed.
If the marketplace update fails, print the command for the user to run manually.
After the GitHub release publishes and the marketplace cache refreshes, render a copy-pasteable Slack announcement so the maintainer can post it directly without hand-translating the release notes. This Step turns the GFM-formatted tmp/release-notes-v<new_version>.md artifact (already produced by Step 9's bin/flow extract-release-notes) into Slack syntax and computes whether /flow:flow-prime is needed this release.
Run both in parallel (one response, one Read tool call + one Bash call):
Use the Read tool on tmp/release-notes-v<new_version>.md.
git diff --name-only <last_tag>..HEAD
Parse the git diff output as a newline-separated file list. Check whether any line equals src/prime_check.rs, equals src/prime_setup.rs, or starts with assets/bin-stubs/. When any match → include the /flow:flow-prime line in the footer (the non-empty-diff variant below). When no match → omit it (the empty-diff variant). The path-filter logic lives in this prose rather than as a -- <paths> argument on the bash command because validate-pretool Layer 6 in src/hooks/validate_pretool.rs blocks git diff invocations carrying file-path arguments — grep for the Layer 6 marker in that file to locate the current implementation.
### New features → Slack *✨ New*. GFM ### Fixes → Slack *🐛 Fixes*. GFM ### Improvements → Slack *💎 Improvements*. Drop empty subsections entirely (header and all).- **Title** — body → • *Title* — body. Slack uses single-asterisk bold and the • glyph; markdown's double-asterisk and - do not render.`name` the same way GFM does.(#NNNN) PR reference at the end of a bullet body. The release notes link to GitHub already.Layer 10), internal function names (e.g. compute_config_hash, validate-pretool), transcript-walker identifiers, hook names, and similar. Rewrite the bullet in business-friendly terms./flow:flow-prime re-prime line per the prime-input check above.Empty-diff variant (no prime-input file changed):
```text
*Upgrade:*
`claude plugin marketplace update flow-marketplace`
```
Non-empty-diff variant (one or more of src/prime_check.rs, src/prime_setup.rs, or any path under assets/bin-stubs/ changed):
```text
*Upgrade:*
`claude plugin marketplace update flow-marketplace`
*Then re-prime your project:* `/flow:flow-prime`
```
Render the Slack message inline as a single fenced code block, ready for the maintainer to copy. Substitute <new_version>, the user-value headline, and the bullet bodies into this template:
```text
🚀 *FLOW v<new_version> shipped — <user-value headline>*
*✨ New*
• *<Title>* — <body>
• *<Title>* — <body>
*🐛 Fixes*
• *<Title>* — <body>
*💎 Improvements*
• *<Title>* — <body>
<footer per variant above>
```
Drop subsections whose source GFM section was empty. Remove the entire emoji-headed block (header and bullets together) — Slack reads cleaner without a header that has no items underneath.
If the Read tool on tmp/release-notes-v<new_version>.md fails (file missing, permission error, prior bin/flow extract-release-notes silently produced nothing), do not block the release. Print a one-line note in your response explaining the skip and proceed to Done. The release itself is already published; only the Slack announcement is missed, and the maintainer can hand-draft from RELEASE-NOTES.md if needed.
Print:
```text
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✓ FLOW v2.7.0 — release — COMPLETE
Released v<new_version>
https://github.com/benkruger/flow/releases/tag/v<new_version>
Local plugin upgraded:
claude plugin marketplace update flow-marketplace
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
```
bin/flow-rs-darwin-arm64 must be regenerated from source on every version bump so it never lags the tagged releasewait-for-release-ci still_pending result, which blocks internally and never leaves partial state