jmeter-debugging

name	jmeter-debugging
description	Iterative AI-driven JMeter script debugging via smoke tests, log analysis, and targeted fixes. Use when the user asks to debug, troubleshoot, fix errors in, or validate a JMeter script, or mentions JMeter smoke testing failures.

JMeter Script Debugging

When to Use This Skill

• User explicitly asks to debug, troubleshoot, or fix a JMeter script
• User reports errors from a JMeter smoke test or test execution
• User wants to validate that a JMeter script runs cleanly
• Never start this workflow unless the user explicitly requests it

---

Reference

This section provides context for humans and capable models. For the step-by-step execution instructions, skip to the Execution section below.

How Debugging Works

This workflow mirrors how an experienced performance test engineer debugs a script:

1. Run a 1/1/1 smoke test
2. Analyze the log to find the first failure
3. Attach a debug post-processor to capture full request/response details
4. Re-run to capture verbose debug data
5. Diagnose root cause from the debug output
6. Apply a single targeted fix
7. Re-test — if clean, done. If not, repeat from step 1.

Maximum 5 iterations. If not resolved after 5 cycles, stop and report.

Common Diagnosis Patterns

Missing or stale correlation values (NOT_FOUND in request body or URL):

• A dynamic value was not extracted from a prior response
• Fix: Add a JSON, Regex, or Boundary extractor to the correct sampler

Extractor on the wrong sampler (common in OAuth/SSO flows):

• The extractor logic is correct but placed under the wrong HTTP sampler
• Fix: Remove from wrong sampler, add to the correct one

Wrong request body or parameterization:

• Hardcoded values that should be parameterized
• Fix: Use edit_jmeter_component with replace_in_body

Auth token or session issues:

• Bearer token, CSRF token, or session cookie not passed correctly
• Fix: Verify extractors are on the correct sampler in the auth chain

Server-side validation errors (application error in response body):

• Request data invalid from server's perspective (duplicate, expired)
• Fix: Report to user — may need test data adjustments, not script fixes

EntraID / Microsoft Entra ID auth flows: See the jmeter-entraid-debugging skill for EntraID-specific diagnosis patterns, components, and sampler sequences.

Debug Manifest

A markdown file maintained throughout debugging to log all issues and fixes.

Location: artifacts/{test_run_id}/analysis/debug_manifest.md

The manifest is created at the start, appended after each iteration, and finalized when debugging completes. See the Execution section for the exact templates.

PerfMemory Integration

This workflow integrates with the PerfMemory lessons-learned memory layer. Before starting a debug loop, the agent searches for similar past issues. During debugging, each attempt is stored so future agents can learn from it. See the perfmemory skill for full details on PerfMemory tools and workflows.

Memory is advisory — if the PerfMemory MCP server is unavailable, skip all memory-related steps and proceed with normal debugging. Do not block debugging because memory is down.

Related Rules

• prerequisites.mdc — test_run_id and artifact structure validation
• skill-execution-rules.mdc — Follow steps in order, do not skip
• mcp-error-handling.mdc — MCP tool error handling
• jmeter-script-guardrails.mdc — Smoke test = 1/1/1, one fix at a time, max 5 iterations, stop on environment issues

---

Execution

This is an iterative workflow. Steps 3-8 repeat until the script is clean or the iteration limit (5) is reached.

---

Collect Inputs

Ask the user for the following values. Do not proceed until all required values are collected.

REQUIRED:
  test_run_id = [ask user — must have an existing JMX in artifacts/{test_run_id}/jmeter/]

---

Step 0.5 — Memory Check (PerfMemory)

Input: test_run_id

Action: Before starting the debug loop, check if this system has known issues in memory. This is a broad check to pre-load context — specific symptom searches happen at Step 5.

0.5a. Search for past sessions related to this system:

find_similar_attempts(
  symptom_text      = "JMeter script debugging for {system_under_test}",
  system_under_test = {system_under_test}
)

0.5b. If results are returned (any similarity), note the top matches for context. These give the agent awareness of what types of issues have been seen before on this system (e.g., "this system commonly has OAuth correlation issues").

0.5c. If no results or PerfMemory is unavailable, proceed normally — this step is advisory only.

Save: memory_context (list of top match summaries, or empty)

---

Step 1 — Create Debug Manifest

Input: test_run_id

Action: Create the file artifacts/{test_run_id}/analysis/debug_manifest.md with:

# Debug Manifest

- **Test Run ID**: {test_run_id}
- **Script**: {jmx_filename}
- **Started**: {current timestamp YYYY-MM-DD HH:MM:SS}
- **Status**: In Progress

---

Save: iteration_count = 0

---

Step 1.5 — Open PerfMemory Session

Input: test_run_id, jmx_filename

Action: Open a debug session in PerfMemory to track this debugging effort.

store_debug_session(
  system_under_test = {system_under_test},
  test_run_id       = {test_run_id},
  script_name       = {jmx_filename},
  auth_flow_type    = {if known from script analysis, otherwise omit},
  environment       = {if known, otherwise omit},
  created_by        = "cursor"
)

Save: pm_session_id from the response.

If PerfMemory is unavailable, set pm_session_id = null and skip all subsequent PerfMemory steps.

---

Step 2 — Enforce 1/1/1 Thread Configuration

Input: test_run_id

Action: Call analyze_jmeter_script to generate the structure files on disk.

analyze_jmeter_script(
  test_run_id  = {test_run_id},
  detail_level = "detailed"
)

Save from the MCP response: exported_files — contains paths to the persisted jmx_structure_*.json and .md files. Also save outline and summary for context.

Important: The MCP response is a summary only — it does NOT include the full node_index or hierarchy. Read the exported JSON file at exported_files.json to obtain the node_index, hierarchy, and variables. Use the node_index to find:

• thread_group_node_id — the Thread Group node (type: ThreadGroup)
• udv_node_id — the User Defined Variables node (type: Arguments)
• sampler_list — all HTTP Sampler node_ids (type: HTTPSamplerProxy)

Check the Thread Group properties. If not set to 1/1/1, override:

edit_jmeter_component(
  test_run_id    = {test_run_id},
  target_node_id = {thread_group_node_id},
  operations     = [
    {"op": "set_prop", "name": "ThreadGroup.num_threads", "value": "1"},
    {"op": "set_prop", "name": "ThreadGroup.ramp_time", "value": "1"},
    {"op": "set_prop", "name": "LoopController.loops", "value": "1"}
  ],
  dry_run = false
)

---

Step 3 — Run Smoke Test

Input: test_run_id

Action:

3a. List scripts to get the JMX path:

list_jmeter_scripts(
  test_run_id = {test_run_id}
)

Save: jmx_path from the response.

3b. Start the test:

start_jmeter_test(
  test_run_id = {test_run_id},
  jmx_path    = {jmx_path}
)

Save: pid from the response.

3c. Monitor and stop early on errors:

get_jmeter_run_status(
  test_run_id = {test_run_id},
  pid         = {pid}
)

Poll every few seconds. When errors appear (error rate > 0%), verify errors in the JTL before stopping:

1. Read the JTL file at artifacts/{test_run_id}/jmeter/test-results.csv
2. Search for any row where the success column is false
3. If success=false rows exist: Errors are confirmed. Stop the test immediately.
4. If NO success=false rows exist: The error_rate was a transient JTL parsing artifact (race condition from reading the CSV while JMeter is mid-write). Ignore the error and continue polling.

The metrics.error_rate from get_jmeter_run_status can report false positives due to this JTL read race condition. Always verify against the JTL source of truth.

Once errors are confirmed in the JTL, stop the test:

stop_jmeter_test(
  test_run_id = {test_run_id}
)

After stopping, wait a few seconds for JMeter threads to wind down before proceeding to log analysis. Thread shutdown is not instantaneous.

If the test completes on its own with 0% errors, proceed directly to Step 4.

Fallback: Only kill the PID if stop_jmeter_test fails to stop the test.

---

Step 4 — Analyze Log

Input: test_run_id

Action: Call analyze_jmeter_log with log_source="jmeter" (not the default):

analyze_jmeter_log(
  test_run_id = {test_run_id},
  log_source  = "jmeter"
)

Save: error_rate and first_failing_sampler from the response.

---

Step 5 — Triage

Input: error_rate, first_failing_sampler, log analysis output

Decision gate — choose ONE path:

Path A — Script is clean (0% error rate):

• Go to Step 9 (Cleanup).

Path B — Environment/systemic issue (stop immediately): If ANY of these are true, stop debugging and go to Step 10 (Report):

• HTTP 401/403 on login/auth samplers
• HTTP 5xx on all or most samplers
• Connection refused/timeout on all samplers
• Repeated identical errors across all samplers

Path C — Script issue (continue debugging): If errors are isolated to specific samplers:

5d. Memory-assisted triage — Before proceeding to Step 6, search PerfMemory for this specific symptom (skip if pm_session_id is null):

find_similar_attempts(
  symptom_text      = {build structured symptom from the error — see perfmemory skill
                       for the template},
  system_under_test = {system_under_test},
  error_category    = {error category from log analysis}
)

If recommendation = apply_known_fix (similarity > 0.85):

• Skip Step 6 and Step 7 — apply the known fix directly at Step 8
• Save matched_attempt_id from the top match for Step 8e

If recommendation = review_suggestions (similarity 0.60 - 0.85):

• Present the top matches to the user for review
• If user approves a suggestion, apply it at Step 8 and save matched_attempt_id
• If user declines, continue to Step 6 as normal

If recommendation = no_match:

• Continue to Step 6 as normal.

---

Step 6 — Attach Debug Post-Processor

Input: test_run_id, first_failing_sampler node_id

Action:

6a. Enable verbose logging:

edit_jmeter_component(
  test_run_id    = {test_run_id},
  target_node_id = {udv_node_id},
  operations     = [{"op": "set_prop", "name": "VERBOSE_LOGGING", "value": "true"}],
  dry_run        = false
)

6b. Add the built-in debug post-processor to the first failing sampler:

add_jmeter_component(
  test_run_id    = {test_run_id},
  component_type = "jsr223_debug_postprocessor",
  parent_node_id = {first_failing_sampler_node_id},
  component_config = {},
  dry_run        = false
)

Save: debug_postprocessor_node_id from the response.

---

Step 7 — Debug Smoke Test and Diagnose

Input: test_run_id

Action:

7a. Re-run the smoke test (same as Step 3, including early stop on errors).

7b. Run analyze_jmeter_log(test_run_id, log_source="jmeter") again.

7c. Read the raw JMeter log at artifacts/{test_run_id}/jmeter/{test_run_id}.log. Search for lines containing [ERROR]:[DEBUG]: — these contain the verbose request/response details from the debug post-processor.

Diagnose the root cause using the debug output. See the Common Diagnosis Patterns in the Reference section.

---

Step 8 — Apply Fix and Iterate

Input: test_run_id, diagnosis from Step 7

Action:

8a. Apply a single targeted fix using add_jmeter_component or edit_jmeter_component. Always use dry_run=true first, then dry_run=false to apply.

8b. Re-analyze the script to refresh the persisted structure files with the latest node_ids after the fix. Read the updated exported JSON file for node lookups in subsequent iterations:

analyze_jmeter_script(
  test_run_id  = {test_run_id},
  detail_level = "detailed"
)

Read the new exported_files.json to get the refreshed node_index.

8c. Increment iteration_count = iteration_count + 1

8d. Append to the debug manifest:

## Iteration {iteration_count} — {current timestamp}

### Error Identified
- **Sampler**: {sampler_name}
- **Response Code**: {code}
- **Error Message**: {message}

### Diagnosis
{description of root cause}

### Fix Applied
{description of fix and which component was added/edited}

### Result After Fix
{to be filled after re-test}
Completed at {current timestamp}.

8e. Store attempt in PerfMemory (skip if pm_session_id is null):

store_debug_attempt(
  session_id         = {pm_session_id},
  iteration_number   = {iteration_count},
  symptom_text       = {structured symptom — see perfmemory skill for template},
  outcome            = {resolved | failed | environment_issue | test_data_issue |
                        authentication_issue | needs_investigation},
  error_category     = {from log analysis},
  severity           = {Critical | High | Medium},
  response_code      = {HTTP status code or exception},
  hostname           = {hostname where error occurred},
  sampler_name       = {failing sampler name},
  api_endpoint       = {failing URL},
  diagnosis          = {root cause from Step 7},
  fix_description    = {what was applied in Step 8a},
  fix_type           = {add_extractor | move_extractor | edit_request_body |
                        edit_header | edit_correlation | other},
  component_type     = {json_extractor | regex_extractor | jsr223_postprocessor |
                        jsr223_preprocessor | http_sampler | test_plan | other},
  matched_attempt_id = {if a memory match was applied, its attempt_id — otherwise omit}
)

Save: last_attempt_id from the response.

8f. Decision gate:

• If iteration_count >= 5: Go to Step 10 (Report) with status "Iteration Limit Reached".
• If iteration_count < 5: Go back to Step 3 (run a fresh smoke test).

---

Step 9 — Cleanup (script is clean)

Input: test_run_id, debug_postprocessor_node_id(s)

Action:

9a. Disable each debug post-processor (do NOT delete):

edit_jmeter_component(
  test_run_id    = {test_run_id},
  target_node_id = {debug_postprocessor_node_id},
  operations     = [{"op": "toggle_enabled"}],
  dry_run        = false
)

9b. Set verbose logging back to false:

edit_jmeter_component(
  test_run_id    = {test_run_id},
  target_node_id = {udv_node_id},
  operations     = [{"op": "set_prop", "name": "VERBOSE_LOGGING", "value": "false"}],
  dry_run        = false
)

9c. Run one final 1/1/1 smoke test (same as Step 3) to confirm the script is clean with debug artifacts disabled. This validation run should complete fully since we expect 0% errors. If errors still appear, stop the test early and return to Step 5.

9d. Go to Step 10 (Report) with status "Resolved".

---

Step 10 — Finalize and Report

Input: test_run_id, iteration_count, final status

Action:

10a. Update the debug manifest header Status and append:

## Final Summary
- **Started**: {start timestamp}
- **Completed**: {current timestamp}
- **Total Duration**: {elapsed time}
- **Total Iterations**: {iteration_count}
- **Final Status**: {Resolved | Needs Human Intervention | Iteration Limit Reached}
- **Fixes Applied**:
  1. {fix description}
  2. {fix description}

10b. Close PerfMemory session (skip if pm_session_id is null):

close_debug_session(
  session_id            = {pm_session_id},
  final_outcome         = {resolved | unresolved | environment_issue |
                           test_data_issue | authentication_issue |
                           iteration_limit_reached | needs_investigation},
  resolution_attempt_id = {last_attempt_id if resolved, otherwise omit},
  notes                 = {brief summary of outcome}
)

10c. Tell the user:

• Total debug iterations and elapsed time
• Fixes applied (sampler name, issue, resolution)
• Final smoke test result
• If resolved: the script is ready for load testing or BlazeMeter upload
• If not resolved: remaining errors and recommendation for manual investigation
• Debug manifest location: artifacts/{test_run_id}/analysis/debug_manifest.md
• Whether lessons were stored in PerfMemory (and session_id for reference)

---

Error Handling

These rules apply to every step:

• Smoke tests MUST use 1 thread, 1 second ramp-up, 1 loop. No exceptions.
• Fix only the first failing sampler per iteration. Do not batch-fix.
• Always use dry_run=true before applying any edit.
• Maximum 5 debug iterations. Stop and report if not resolved.
• If errors indicate environment/infrastructure issues, stop immediately and report.
• Always use log_source="jmeter" for local smoke tests (not the default "blazemeter").
• Do NOT write code to fix MCP tool issues.
• Always maintain the debug manifest throughout the workflow.
• PerfMemory is advisory only — if any PerfMemory tool call fails, log the error and continue debugging. Never block the debug loop because memory is unavailable.
• If pm_session_id is null, skip all PerfMemory steps (0.5, 1.5, 5d, 8e, 10b).