소스 정보
- 저장소
- CyberStrikeus/CyberStrike
- 최근 소스 활동
- 2026년 4월 22일 14:54
- 감지된 SKILL.md 언어
- 영어
- 스타
- 1,653
- 포크
- 254
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
메뉴
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
직접 명령은 검토 Prompt를 거치지 않습니다. 실행하기 전에 소스를 확인하세요.
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu1604-v200-3-3-9명령은 한 줄로 유지됩니다. 복사하기 전에 가로로 스크롤해 전체 내용을 확인하세요.
로컬 사본을 원하시나요? SkillsMP에서 현재 제공할 수 있는 파일을 다운로드하세요.
macOS post-exploitation for credential harvesting, DTrace monitoring, TCC bypass, and stealth operations via native tools
Windows userland post-exploitation for credential harvesting, monitoring, AMSI/ETW bypass, and stealth operations
Kubernetes post-exploitation for container escape, secret extraction, RBAC abuse, and cluster persistence
SOC 직업 분류 기준
SKILL.md 표시 중
| name | cis-ubuntu1604-v200-3-3-9 |
| description | Ensure IPv6 router advertisements are not accepted |
| category | cis-networking |
| version | 2.0.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","linux","ubuntu-16.04","networking"] |
| cis_id | 3.3.9 |
| cis_benchmark | CIS Ubuntu Linux 16.04 LTS Benchmark v2.0.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
This setting disables the system's ability to accept IPv6 router advertisements.
It is recommended that systems do not accept router advertisements as they could be tricked into routing traffic to compromised machines. Setting hard routes within the system (usually a single default route to a trusted router) protects the system from bad routes.
None.
IF IPv6 is enabled:
Run the following commands and verify output matches:
sysctl net.ipv6.conf.all.accept_ra
sysctl net.ipv6.conf.default.accept_ra
grep "net\.ipv6\.conf\.all\.accept_ra" /etc/sysctl.conf /etc/sysctl.d/*
grep "net\.ipv6\.conf\.default\.accept_ra" /etc/sysctl.conf /etc/sysctl.d/*
OR verify IPv6 is disabled:
Run the following script. Output will confirm if IPv6 is disabled on the system.
#!/usr/bin/bash
output=""
grubfile="$(find -L /boot -name 'grub.cfg' -type f)"
[ -f "$grubfile" ] && ! grep "^\s*linux" "$grubfile" | grep -vq ipv6.disable=1 && output="ipv6 disabled in grub config"
grep -Eqs "^\s*net\.ipv6\.conf\.all\.disable_ipv6\s*=\s*1\b" /etc/sysctl.conf /etc/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf /run/sysctl.d/*.conf && grep -Eqs "^\s*net\.ipv6\.conf\.default\.disable_ipv6\s*=\s*1\b" /etc/sysctl.conf /etc/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf /run/sysctl.d/*.conf && sysctl net.ipv6.conf.all.disable_ipv6 | grep -Eq "^\s*net\.ipv6\.conf\.all\.disable_ipv6\s*=\s*1\b" && sysctl net.ipv6.conf.default.disable_ipv6 | grep -Eq "^\s*net\.ipv6\.conf\.default\.disable_ipv6\s*=\s*1\b" && output="ipv6 disabled in sysctl config"
[ -n "$output" ] && echo -e || -e
If IPv6 is enabled:
net.ipv6.conf.all.accept_ra = 0
net.ipv6.conf.default.accept_ra = 0
And the grep commands should return:
net.ipv6.conf.all.accept_ra = 0
net.ipv6.conf.default.accept_ra = 0
IF IPv6 is enabled:
Set the following parameters in /etc/sysctl.conf or a /etc/sysctl.d/* file:
net.ipv6.conf.all.accept_ra = 0
net.ipv6.conf.default.accept_ra = 0
Run the following commands to set the active kernel parameters:
sysctl -w net.ipv6.conf.all.accept_ra=0
sysctl -w net.ipv6.conf.default.accept_ra=0
sysctl -w net.ipv6.route.flush=1
accept_ra is enabled (set to 1) by default.
Version 7
5.1 Establish Secure Configurations - Maintain documented, standard security configuration standards for all authorized operating systems and software.
Automated