소스 정보
- 저장소
- CyberStrikeus/CyberStrike
- 최근 소스 활동
- 2026년 4월 22일 14:54
- 감지된 SKILL.md 언어
- 영어
- 스타
- 1,653
- 포크
- 254
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
메뉴
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
직접 명령은 검토 Prompt를 거치지 않습니다. 실행하기 전에 소스를 확인하세요.
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu2004-v300-2-1-3명령은 한 줄로 유지됩니다. 복사하기 전에 가로로 스크롤해 전체 내용을 확인하세요.
로컬 사본을 원하시나요? SkillsMP에서 현재 제공할 수 있는 파일을 다운로드하세요.
macOS post-exploitation for credential harvesting, DTrace monitoring, TCC bypass, and stealth operations via native tools
Windows userland post-exploitation for credential harvesting, monitoring, AMSI/ETW bypass, and stealth operations
Kubernetes post-exploitation for container escape, secret extraction, RBAC abuse, and cluster persistence
SOC 직업 분류 기준
SKILL.md 표시 중
| name | cis-ubuntu2004-v300-2-1-3 |
| description | Ensure dhcp server services are not in use |
| category | cis-networking |
| version | 3.0.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","linux","ubuntu-20.04","services"] |
| cis_id | 2.1.3 |
| cis_benchmark | CIS Ubuntu Linux 20.04 LTS Benchmark v3.0.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
Dynamic Host Configuration Protocol (DHCP) is a service that allows machines to be automatically assigned IP addresses, reducing the administration burden of manually assigning IP addresses to all devices on a network.
Unless a system is specifically set up to act as a DHCP server, it is recommended that the dhcp server service be disabled to reduce the potential attack surface.
Run the following command to verify isc-dhcp-server is not installed:
# dpkg-query -W -f='${binary:Package}\t${Status}\t${db:Status-Status}\n' isc-dhcp-server
If installed, run:
# systemctl is-enabled isc-dhcp-server.service isc-dhcp-server6.service
# systemctl is-active isc-dhcp-server.service isc-dhcp-server6.service
Verify the services are not enabled and not active.
isc-dhcp-server should not be installed, or if installed, the services should be stopped and masked.
Run the following commands to stop, mask, and purge isc-dhcp-server:
# systemctl stop isc-dhcp-server.service isc-dhcp-server6.service
# systemctl mask isc-dhcp-server.service isc-dhcp-server6.service
# apt purge isc-dhcp-server
isc-dhcp-server is not installed by default.
| Controls Version | Control | IG 1 | IG 2 | IG 3 |
|---|---|---|---|---|
| v8 | 4.8 Uninstall or Disable Unnecessary Services on Enterprise Assets and Software | x | x | |
| v7 | 9.2 Ensure Only Approved Ports, Protocols and Services Are Running | x | x |
MITRE ATT&CK Mappings: T1203, T1210, T1543, T1543.002 | TA0008 | M1042