소스 정보
- 저장소
- CyberStrikeus/CyberStrike
- 최근 소스 활동
- 2026년 4월 22일 14:54
- 감지된 SKILL.md 언어
- 영어
- 스타
- 1,653
- 포크
- 254
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
메뉴
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
직접 명령은 검토 Prompt를 거치지 않습니다. 실행하기 전에 소스를 확인하세요.
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu2004-v300-5-1-12명령은 한 줄로 유지됩니다. 복사하기 전에 가로로 스크롤해 전체 내용을 확인하세요.
로컬 사본을 원하시나요? SkillsMP에서 현재 제공할 수 있는 파일을 다운로드하세요.
SOC 직업 분류 기준
SKILL.md 표시 중
| name | cis-ubuntu2004-v300-5-1-12 |
| description | Ensure sshd KexAlgorithms is configured |
| category | cis-networking |
| version | 3.0.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","linux","ubuntu-20.04","ssh"] |
| cis_id | 5.1.12 |
| cis_benchmark | CIS Ubuntu Linux 20.04 LTS Benchmark v3.0.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
Key exchange is any method in cryptography by which cryptographic keys are exchanged between two parties, allowing use of a cryptographic algorithm. If the sender and receiver wish to exchange encrypted messages, each must be equipped to encrypt messages to be sent and decrypt messages received.
Notes:
Key exchange methods that are considered weak should be removed. A key exchange method may be weak because too few bits are used, or the hashing algorithm is considered too weak. Using weak algorithms could expose connections to man-in-the-middle attacks.
Run the following command to verify none of the "weak" Key Exchange algorithms are being used:
# sshd -T | grep -Pi -- 'kexalgorithms\h+([^#\n\r]+,)?(diffie-hellman-group1-sha1|diffie-hellman-group14-sha1|diffie-hellman-group-exchange-sha1)\b'
Nothing should be returned.
diffie-hellman-group1-sha1
diffie-hellman-group14-sha1
diffie-hellman-group-exchange-sha1
Nothing should be returned (no weak KexAlgorithms in use).
Edit the /etc/ssh/sshd_config file and add/modify the KexAlgorithms line to contain a comma separated list of the site unapproved (weak) KexAlgorithms preceded with a - above any Include entries:
Example:
KexAlgorithms -diffie-hellman-group1-sha1,diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha1
Note: First occurrence of an option takes precedence. If Include locations are enabled, used, and order of precedence is understood in your environment, the entry may be created in a file in Include location.
KexAlgorithms sntrup761x25519-sha512@openssh.com,curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256
v8 - 3.10 Encrypt Sensitive Data in Transit Encrypt sensitive data in transit. Example implementations can include: Transport Layer Security (TLS) and Open Secure Shell (OpenSSH).
v7 - 14.4 Encrypt All Sensitive Information in Transit Encrypt all sensitive information in transit.
Additional Information: The supported algorithms are: curve25519-sha256, curve25519-sha256@libssh.org, diffie-hellman-group1-sha1, diffie-hellman-group14-sha1, diffie-hellman-group14-sha256, diffie-hellman-group16-sha512, diffie-hellman-group18-sha512, diffie-hellman-group-exchange-sha1, diffie-hellman-group-exchange-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, sntrup459761x25519-sha512@tinyssh.org
MITRE ATT&CK Mappings: T1040, T1040.000, T1557, T1557.000 | TA0006 | M1041