소스 정보
- 저장소
- CyberStrikeus/CyberStrike
- 최근 소스 활동
- 2026년 4월 22일 14:54
- 감지된 SKILL.md 언어
- 영어
- 스타
- 1,653
- 포크
- 254
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
메뉴
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
SOC 직업 분류 기준
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
직접 명령은 검토 Prompt를 거치지 않습니다. 실행하기 전에 소스를 확인하세요.
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu2004-v300-6-2-3-3명령은 한 줄로 유지됩니다. 복사하기 전에 가로로 스크롤해 전체 내용을 확인하세요.
로컬 사본을 원하시나요? SkillsMP에서 현재 제공할 수 있는 파일을 다운로드하세요.
SKILL.md 표시 중
macOS post-exploitation for credential harvesting, DTrace monitoring, TCC bypass, and stealth operations via native tools
Windows userland post-exploitation for credential harvesting, monitoring, AMSI/ETW bypass, and stealth operations
Kubernetes post-exploitation for container escape, secret extraction, RBAC abuse, and cluster persistence
| name | cis-ubuntu2004-v300-6-2-3-3 |
| description | Ensure journald is configured to send logs to rsyslog |
| category | cis-logging |
| version | 3.0.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","linux","ubuntu-20.04","rsyslog"] |
| cis_id | 6.2.3.3 |
| cis_benchmark | CIS Ubuntu Linux 20.04 LTS Benchmark v3.0.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
Data from systemd-journald may be stored in volatile memory or persisted locally on the server. Utilities exist to accept remote export of systemd-journald logs, however, use of the rsyslog service provides a consistent means of log collection and export.
rsyslog is the preferred method for capturing logs, all logs of the system should be sent to it for further processing.Note: This recommendation only applies if rsyslog is the chosen method for client side logging. Do not apply this recommendation if systemd-journald is used.
rsyslog is the preferred method for capturing logsRun the following command to verify systemd-journald.service and rsyslog.service are loaded and active:
# systemctl list-units --type service | grep -P -- '(journald|rsyslog)'
Output should be similar to:
rsyslog.service loaded active running System Logging Service
systemd-journald.service loaded active running Journal Service
Run the following command to verify that logs are forwarded to rsyslog by setting ForwardToSyslog to yes in the systemd-journald configuration:
# grep -Psi "^ForwardToSyslog=yes" /etc/systemd/journal.conf /etc/systemd/journald.conf.d/*
ForwardToSyslog=yes
Journald is the preferred method for capturing logs, this section and Recommendation should be skipped and the "Configure Journald" section followed.rsyslog is the preferred method for capturing logs:Set the following parameter in the [Journal] section in /etc/systemd/journald.conf or a file in /etc/systemd/journald.conf.d/ ending in :
.confForwardToSyslog=yes
Note: If this setting appears in a canonically later file, or later in the same file, the setting will be overwritten.
Run to following command to update the parameters in the service:
Restart systemd-journald.service:
# systemctl reload-or-restart systemd-journald.service
ForwardToSyslog=no
| Controls Version | Control | IG 1 | IG 2 | IG 3 |
|---|---|---|---|---|
| v8 | 8.2 Collect Audit Logs | |||
| v8 | 8.9 Centralize Audit Logs | |||
| v7 | 6.2 Activate audit logging | |||
| v7 | 6.3 Enable Detailed Logging | |||
| v7 | 6.5 Central Log Management |
| Techniques / Sub-techniques | Tactics | Mitigations |
|---|---|---|
| T1070, T1070.002, T1562, T1562.006, T1565 | TA0040 | M1029 |