소스 정보
- 저장소
- CyberStrikeus/CyberStrike
- 최근 소스 활동
- 2026년 4월 22일 14:54
- 감지된 SKILL.md 언어
- 영어
- 스타
- 1,653
- 포크
- 254
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
메뉴
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
직접 명령은 검토 Prompt를 거치지 않습니다. 실행하기 전에 소스를 확인하세요.
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu2004-v300-6-2-3-6명령은 한 줄로 유지됩니다. 복사하기 전에 가로로 스크롤해 전체 내용을 확인하세요.
로컬 사본을 원하시나요? SkillsMP에서 현재 제공할 수 있는 파일을 다운로드하세요.
SOC 직업 분류 기준
SKILL.md 표시 중
| name | cis-ubuntu2004-v300-6-2-3-6 |
| description | Ensure rsyslog is configured to send logs to a remote log host |
| category | cis-logging |
| version | 3.0.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","linux","ubuntu-20.04","rsyslog"] |
| cis_id | 6.2.3.6 |
| cis_benchmark | CIS Ubuntu Linux 20.04 LTS Benchmark v3.0.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
rsyslog supports the ability to send log events it gathers to a remote log host or to receive messages from remote hosts, thus enabling centralized log management.
Storing log data on a remote host protects log integrity from local attacks. If an attacker gains root access on the local system, they could tamper with or remove log data that is stored on the local system.
Run the following command and review the output of rsyslog configuration. Verify that logs are sent to a central host used by your organization:
basic format:
# grep "^.*[^I][^I]*@" /etc/rsyslog.conf /etc/rsyslog.d/*.conf
Output should include @@<FQDN or IP of remote loghost>, for example:
*.* @@loghost.example.com
Output should include @@<FQDN or IP of remote loghost>:
Example output:
/etc/rsyslog.d/60-rsyslog.conf:*.* @@loghost.example.com
Run the following command and review the output of rsyslog configuration. Verify that logs are sent to a central host used by your organization:
advanced format:
# grep -E '^\s*([^#]+\s+)?action\(([^#]+\s+)?\btarget=\"?[^#"]+\"?\b' /etc/rsyslog.conf /etc/rsyslog.d/*.conf
Output should include target=<FQDN or IP of remote loghost>:
Example output:
/etc/rsyslog.d/60-rsyslog.conf:*.* action(type="omfwd" target="loghost.example.com" port="514" protocol="tcp"
Verify logs are being sent to a remote log host.
Edit the rsyslog configuration and add the following line (where loghost.example.com is the name of your central log host). The target directive may either be a fully qualified domain name or an IP address.
*.* action(type="omfwd" target="192.168.2.100" port="514" protocol="tcp"
action.resumeRetryCount="100"
queue.type="linkedList" queue.size="1000")
Run the following command to reload rsyslog.service:
# systemctl reload-or-restart rsyslog.service
Not configured by default.
| Controls Version | Control | IG 1 | IG 2 | IG 3 |
|---|---|---|---|---|
| v8 | 8.2 Collect Audit Logs | |||
| v7 | 6.2 Activate audit logging | |||
| v7 | 6.3 Enable Detailed Logging |
| Techniques / Sub-techniques | Tactics | Mitigations |
|---|---|---|
| T1070, T1070.002, T1562, T1562.006 | TA0040 | M1029 |