| name | audio-wasapi |
| description | Manipulate Windows audio via WASAPI (learn.microsoft.com/coreaudio): SoundVolumeView + svcl.exe (NirSoft — set default device, per-app volumes, save/load profiles), AudioDeviceCmdlets PowerShell module (Get-AudioDevice, Set-AudioDevice, Get-AudioDevicePlaybackMute), nircmd setdefaultsounddevice. Shared mode (Windows engine resamples all streams to endpoint fixed format) vs Exclusive mode (bit-perfect, audiophile, ~sub-3ms latency with IAudioClient3 + event-driven callbacks). WASAPI then MMDevice then Audio Engine (audiodg.exe) then WDM/KS. ASIO is Steinberg's parallel stack bypassing Windows audio. Virtual audio devices: VB-Audio Virtual Cable, VoiceMeeter/Banana/Potato. Use when the user asks to change Windows default audio device, route app audio, use VoiceMeeter, install VB-Cable, set a specific device from PowerShell, or enable exclusive-mode low-latency output.
|
| argument-hint | [action] |
Audio WASAPI
Context: $ARGUMENTS
Quick start
- List all audio endpoints: → Step 1 (
winaudio.py list-devices)
- Check current default: → Step 2 (
winaudio.py get-default)
- Change default output/input/communications: → Step 3 (
winaudio.py set-default)
- Mute / unmute / change volume: → Step 4 (
winaudio.py mute/unmute/volume)
- Check if exclusive mode is allowed on a device: → Step 5 (
winaudio.py exclusive-test)
- Install VB-Cable virtual cable: → Step 6 (
winaudio.py vbcable-install)
- Set up VoiceMeeter virtual mixer: → Step 7 (
winaudio.py voicemeeter-config)
When to use
- User is on Windows and needs terminal / PowerShell-driven audio control.
- User wants to change the default playback/recording/communications device
without clicking through Sound settings.
- User wants bit-perfect exclusive-mode output for audiophile playback, or to
diagnose why an app can't grab the device in exclusive mode.
- User wants to install a virtual audio cable (VB-Cable, VoiceMeeter) to route
system audio into OBS / streaming tools.
- User is debugging a shared-mode vs exclusive-mode mismatch (pops, silence,
format negotiation errors).
Not for: macOS (use audio-coreaudio), Linux (use audio-pipewire).
The script exits 2 with a helpful message if run on non-Windows.
Read references/exclusive-vs-shared.md
when the user asks about latency, bit-perfect playback, or
IAudioClient::Initialize errors.
Read references/virtual-cable.md when the user
asks about OBS system-audio capture or VoiceMeeter routing.
Step 1 — List devices
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py list-devices
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py list-devices --kind playback
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py list-devices --kind recording
Calls Get-AudioDevice -List (from the AudioDeviceCmdlets PowerShell module).
If the module isn't installed the PowerShell errors out — install with:
Install-Module -Name AudioDeviceCmdlets -Scope CurrentUser
Output columns: Index, Default, Type, Name, ID.
Step 2 — Get current default
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py get-default
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py get-default --kind recording
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py get-default --kind communications
Windows has three separate default roles:
| Role | Used by |
|---|
playback (eMultimedia) | Music/movie apps that request "default" device |
recording (eMultimedia for capture) | Your default mic |
communications (eCommunications) | Zoom / Teams / Discord for voice |
Step 3 — Change the default
Pass the device name exactly as list-devices printed it (quote for spaces):
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py set-default "Speakers (Realtek High Definition Audio)"
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py set-default "Focusrite USB Audio" --kind recording
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py set-default "Shure MV7+" --kind communications
Alternatives not wrapped here (also valid):
nircmd setdefaultsounddevice "<Name>" — older NirCmd, smaller.svcl.exe /SetDefault "<Name>" Playback — NirSoft command-line version
of SoundVolumeView. See references/virtual-cable.md
for full svcl flags.
Step 4 — Mute / unmute / volume
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py mute "Speakers (Realtek High Definition Audio)"
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py unmute "Speakers (Realtek High Definition Audio)"
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py volume "Speakers (Realtek High Definition Audio)" --level 50
For per-app (not per-device) volume, use NirSoft's SoundVolumeView GUI or
svcl.exe /SetAppDefault <process>.exe Playback. Per-app volume is not
wrapped here because the app-vs-device distinction deserves explicit CLI args.
Step 5 — Probe exclusive-mode permission
Exclusive mode gives an app sole ownership of the device at a negotiated
format. Bit-perfect, lowest latency, but blocks every other app.
Each endpoint has a registry flag "Allow applications to take exclusive
control of this device". The wrapper reads it:
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py exclusive-test "Speakers (Realtek High Definition Audio)"
Output:
Speakers (Realtek High Definition Audio) -> exclusive mode: allowed|blocked|unknown
allowed = apps can request exclusive mode. blocked = Windows will always
return AUDCLNT_E_EXCLUSIVE_MODE_NOT_ALLOWED. The toggle lives in Sound
Control Panel → Properties → Advanced.
To set that flag from script you need elevation + registry write — not
wrapped here deliberately. See
references/exclusive-vs-shared.md for
the manual path and the audio-engine implications.
Step 6 — VB-Audio Virtual Cable
The go-to free virtual audio cable on Windows. Creates two endpoints
(CABLE Input = a virtual speaker, CABLE Output = a virtual mic) that are
internally wired. Anything played to CABLE Input is captured from CABLE Output.
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py vbcable-install
Prints the download URL and install steps (does not auto-download). The
script refuses to fetch the installer itself — VB-Audio is donationware + has
paid tiers; auto-install risks violating their T&Cs.
Typical OBS system-audio pattern:
- Install VB-Cable.
- Set Windows default playback = VB-Cable Input. Now all system audio is
routed into the cable instead of your speakers.
- Configure OBS Audio Input Capture = VB-Cable Output.
- To still hear system audio, also route VB-Cable Input out to your speakers
via VoiceMeeter, or use "Listen to this device" on the CABLE Output
properties.
Step 7 — VoiceMeeter
VoiceMeeter is a virtual mixer that ships its own set of virtual WDM devices
(VAIO1/2/3) and acts as an ASIO host. Free for the 2-bus version, donationware
for Banana (3 physical + 2 virtual) and Potato (5+3).
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py voicemeeter-config
Prints the install URL and basic setup. Configuration is primarily GUI; the
config XML lives under %APPDATA%\VB\Voicemeeter. Scriptable via the
C API (VoicemeeterRemote.dll) or the unofficial Python binding
pip install voicemeeter-api. See
references/virtual-cable.md for a worked
routing example.
Gotchas
- Windows has no first-party CLI to change audio devices. Everything here
is third-party (AudioDeviceCmdlets, NirSoft SoundVolumeView/svcl, VB-Audio).
Expect install steps.
- AudioDeviceCmdlets isn't signed by Microsoft —
Install-Module from
PSGallery is trust-by-repository. Users with strict execution policy may
need Set-ExecutionPolicy -Scope CurrentUser RemoteSigned.
- Device names are not stable across Windows updates. A Windows update
that reinstalls a Realtek driver renames endpoints from "Speakers (2-
Realtek Audio)" to "Speakers (Realtek Audio)". Script around Name at your
peril — prefer the immutable endpoint
Id GUID from Get-AudioDevice -List.
set-default via AudioDeviceCmdlets changes the Multimedia default;
communications is a separate flag. Zoom/Discord pull from the
communications endpoint by default, not the multimedia one. To change both,
call set-default --kind playback then set-default --kind communications.- Exclusive mode is gated per-endpoint, not per-app. The endpoint toggle
blanket-allows or blanket-blocks. An app still has to successfully
negotiate a format (bit depth + rate + channel layout) that the hardware
supports in exclusive mode, or
IAudioClient::Initialize returns
AUDCLNT_E_UNSUPPORTED_FORMAT.
- The Windows audio engine (
audiodg.exe) always resamples shared-mode
streams to the endpoint's fixed "mix format". If the mix format is
48 kHz 24-bit, a 44.1 kHz 16-bit track gets resampled before it even hits
the device. This is why bit-perfect listeners use exclusive mode.
- WASAPI's
IAudioClient3::InitializeSharedAudioStream gives sub-3 ms
latency without exclusive mode, but requires Windows 10+ and an endpoint
whose audio engine period is small enough (GetSharedModeEnginePeriod).
Not every driver / hardware combo supports it.
- VB-Cable is donationware + has paid A+B / C+D variants. Installing
multiple variants gives you multiple cables — they don't conflict, but keep
track of which one you're pointing apps at.
- VoiceMeeter + physical ASIO app conflict. Only one process can hold the
ASIO driver. If your DAW has claimed the interface's ASIO driver,
VoiceMeeter can't bridge to it simultaneously.
- ASIO4ALL and FlexASIO are different. ASIO4ALL wraps WDM/KS; FlexASIO
wraps WASAPI. Both offer an ASIO layer to apps that only speak ASIO, but
FlexASIO plays better with modern WASAPI-aware hardware.
- SoundVolumeView and svcl.exe are the same tool — svcl is the pure-CLI
version. Both are NirSoft freeware closed-source. No PSGallery equivalent.
- The registry flag for "exclusive mode allowed" lives under
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices\Audio\Render\ <GUID>\Properties\{b3f8fa53-0004-438e-9003-51a46e139bfc},2 — that's what
exclusive-test reads. Writing requires SYSTEM / admin + a reboot to take
effect for some driver stacks.
- After installing / removing a virtual audio driver (VB-Cable, VoiceMeeter),
existing apps do NOT see the new device until they reopen their endpoint
enumeration. Most restart-to-pickup.
Examples
Example 1 — "Swap default output to my headphones for Spotify"
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py list-devices --kind playback
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py set-default "Headphones (Sony WH-1000XM5 Stereo)"
Example 2 — "Make Zoom use my USB mic without affecting music apps"
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py set-default "Microphone (USB PnP Sound Device)" --kind communications
Example 3 — "Capture system audio into OBS"
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py vbcable-install
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py set-default "CABLE Input (VB-Audio Virtual Cable)"
Example 4 — "Why does Foobar2000 say exclusive mode failed?"
uv run ${CLAUDE_SKILL_DIR}/scripts/winaudio.py exclusive-test "Speakers (Realtek High Definition Audio)"
Example 5 — "Script this across many machines"
# Skip the Python wrapper; call AudioDeviceCmdlets directly:
Import-Module AudioDeviceCmdlets
$d = Get-AudioDevice -List | Where-Object { $_.Name -like '*Focusrite*' -and $_.Type -eq 'Playback' }
Set-AudioDevice -Index $d.Index
The wrapper is a convenience layer; any PowerShell script targeting the same
cmdlet works fine.
Troubleshooting
Import-Module: The specified module 'AudioDeviceCmdlets' was not loaded
Cause: Module not installed.
Fix:
Install-Module -Name AudioDeviceCmdlets -Scope CurrentUser -Force
Get-AudioDevice : Running scripts is disabled on this system
Cause: Execution policy Restricted (default on Windows Server).
Fix:
Set-ExecutionPolicy -Scope CurrentUser RemoteSigned
set-default succeeded but the app still plays through old device
Cause: Many apps cache the endpoint at startup and don't listen for
MMDevice default-change notifications. Restart the app.
Fix: Restart the app, or for Chromium-based apps use their internal
"Audio output" setting in site permissions.
Exclusive-mode app gets AUDCLNT_E_UNSUPPORTED_FORMAT
Cause: Requested format isn't natively supported by the driver in
exclusive mode. No resampler runs in exclusive mode.
Fix: Match exactly what the Properties → Advanced tab lists as a
supported format, or switch to shared mode (accepts the engine mix format
via resampling).
VB-Cable installed but doesn't appear
Cause: Installer ran but driver signing was blocked; reboot skipped.
Fix: Reboot. If still missing, reinstall as Administrator and approve
the UAC / driver-signing prompt when it appears.
VoiceMeeter shows "Audio Engine" stopped
Cause: Sample-rate mismatch between physical A1 output and VoiceMeeter's
internal engine rate.
Fix: Menu → System Settings/Options → set engine rate to match the
physical interface's configured sample rate.
Reference docs
