| name | c-style |
| description | Enforce and review this project's C/C++ coding style for RP2040/RP2350 Pico SDK firmware. Use this skill whenever writing, editing, or reviewing .c, .h, .cpp, .hpp, CMakeLists, Pico SDK module code, FreeRTOS task/queue/semaphore code, u8g2/MUI display code, lwIP/CYW43 wireless or REST endpoint code, EEPROM configuration code, PIO/UART/I2C/SPI/PWM driver code, or embedded target configuration in this repository. Apply it proactively for C/C++ refactors, bug fixes, feature work, and code-review requests; do not wait for the user to ask for style explicitly. |
C/C++ Style Guide
This skill captures the C/C++ style used in this repository. Apply it proactively when writing or reviewing firmware code.
This project is Pico SDK firmware for RP2040/RP2350-class boards, with FreeRTOS, u8g2/MUI, lwIP/CYW43 networking, EEPROM-backed configuration, PIO stepper control, and small C++ bridge islands. The strongest style signal is tracked project code under src/ and target hardware configuration under targets/.
Treat library/ code as third-party unless the user explicitly asks to modify it. Generated files under src/generated/ should normally be regenerated rather than hand edited.
The style is direct embedded C with pragmatic C++ where it helps integrate C++ helpers or device libraries: explicit initialization, visible hardware control, clear task/queue flow, and small abstractions only where the surrounding module already supports them.
Rule 1 - Match the local module shape
Keep code organized as small module pairs in src/: feature.c / feature.h, or feature.cpp / feature.h when C++ is required. Public APIs are declared in the header and implemented in the source file. File-local helpers, callbacks, buffers, task handles, and state should be static unless existing code deliberately shares them.
Prefer existing module vocabulary and prefixes:
*_init, *_config_init, *_config_save*_task, *_render_task, *_wait_for_*http_rest_*, http_get_*, populate_rest_*, apply_rest_**_set_*, get_*, *_enable- hardware names such as
motor_*, scale_*, servo_gate_*, wireless_*, neopixel_led_*
Wrong:
void update(void) {
...
}
Right:
static void wireless_update_state(void) {
...
}
When reviewing: check whether a new symbol should be public. If not, make it static and name it with the module's existing vocabulary.
Rule 2 - Use the project's C naming conventions
Use snake_case for project-owned functions, variables, fields, files, callbacks, and tasks. Use *_t typedef names for structs, enums, and function pointer types where the surrounding code does. Use ALL_CAPS for macros and enum values.
Keep Pico SDK, FreeRTOS, lwIP, u8g2, CYW43, and vendor-library names as-is. Do not wrap library types just to make names prettier.
Wrong:
typedef struct {
int TimeoutMs;
} TimerConfig;
void StartTimer(TimerConfig *config);
Right:
typedef struct {
int timeout_ms;
} timer_config_t;
void start_timer(timer_config_t *config);
When reviewing: flag CamelCase in project-owned C APIs unless it comes from an external type, constant, generated code, or local legacy API that the edit is intentionally preserving.
Rule 3 - Match formatting in the current file
Use four-space indentation. Most source uses K&R braces for functions and control blocks:
bool motor_config_init(void) {
bool is_ok = true;
if (!is_ok) {
return false;
}
return true;
}
Pointer spacing varies in the existing code, with both char * s and char *s present. Match the surrounding file instead of imposing a repo-wide rewrite. Avoid formatting-only churn outside the edited area.
Keep designated initializers for config/default structures, with short inline comments where they describe hardware, EEPROM layout, units, or user-visible behavior.
Right:
const eeprom_wireless_metadata_t default_eeprom_wireless_metadata = {
.wireless_data_rev = 0,
.ssid = "",
.pw = "",
.auth = AUTH_WPA2_MIXED_PSK,
.timeout_ms = 30000,
.enable = false,
};
When reviewing: distinguish style consistency from broad cleanup. Prefer focused fixes over reformatting whole files.
Rule 4 - Use local error and return contracts
This project usually returns bool for success/failure and small project enums for richer initialization failures. Preserve that style unless the surrounding module already uses another contract.
Use early returns for invalid state, failed allocation, failed hardware initialization, failed EEPROM reads/writes, and task/queue creation failures. Diagnostics are commonly printf(...); keep messages actionable and include hardware/config context when available.
Wrong:
int init_sensor(sensor_t *ctx) {
if (ctx == NULL) {
return -1;
}
return sensor_open(ctx);
}
Right:
bool sensor_init(sensor_t *ctx) {
if (ctx == NULL) {
printf("Sensor context is NULL\n");
return false;
}
if (!sensor_open(ctx)) {
printf("Unable to initialize sensor\n");
return false;
}
return true;
}
For multi-stage hardware initialization, use a module enum when the caller needs to distinguish failures:
typedef enum {
MOTOR_INIT_OK = 0,
MOTOR_INIT_CFG_ERR = 2,
MOTOR_INIT_COARSE_DRV_ERR = 3,
MOTOR_INIT_FINE_DRV_ERR = 4,
MOTOR_INIT_PIO_ERR = 5,
} motor_init_err_t;
When reviewing: flag silent failures, ignored allocation/task creation failures in new code, and ad-hoc integer return codes when a local enum or bool contract already exists.
Rule 5 - Follow the EEPROM configuration pattern
Persistent configuration lives in EEPROM-backed structs with defaults and CRC validation through shared helpers in common.c.
The usual pattern is:
- A persistent config struct in the module header, often named
eeprom_*_data_t or eeprom_*_metadata_t
- A global live module config object in the source file
- A
const ... default_* initializer with .revision = 0 or similar legacy revision field
*_config_init() calls load_config(...)*_config_save() calls save_config(...)- Successful init registers the save handler with
eeprom_register_handler(...)
- REST handlers update live config and save only when the
ee parameter is true
Right:
bool wireless_config_save() {
bool is_ok = save_config(EEPROM_WIRELESS_CONFIG_BASE_ADDR,
&wireless_config.eeprom_wireless_metadata,
sizeof(eeprom_wireless_metadata_t));
return is_ok;
}
When writing a new config feature, preserve EEPROM layout compatibility. Add fields carefully, keep defaults explicit, and update the relevant EEPROM address/revision policy only when required.
Rule 6 - Keep target hardware configuration in targets/
Board-specific pin and peripheral mappings live under targets/, for example targets/raspberrypi_pico_w_config.h. Use macros for fixed hardware resources:
#define MOTOR_UART uart1
#define MOTOR_UART_TX 4
#define MOTOR_UART_RX 5
#define MOTOR_PIO pio0
Project modules should consume these macros via configuration.h rather than hard-coding pins or peripheral instances locally.
When adding RP2040/RP2350 board support, prefer a new target config header and CMake board selection updates over conditional clutter in feature modules.
Rule 7 - Use Pico SDK hardware APIs directly and visibly
Hardware control should be explicit and close to the module that owns it. Prefer Pico SDK calls already used in the codebase:
- GPIO:
gpio_init, gpio_set_dir, gpio_put, gpio_set_function
- UART:
uart_init, uart_write_blocking, uart_read_blocking, uart_is_readable_within_us
- PIO:
pio_claim_unused_sm, pio_add_program, pio_sm_set_enabled, pio_sm_put_blocking
- Clocks/time:
clock_get_hz, time_us_32, busy_wait_us, busy_wait_ms
- CYW43/lwIP: protect lwIP calls with
cyw43_arch_lwip_begin() / cyw43_arch_lwip_end() where the surrounding code does
Check return values for resource-claiming APIs and report failures:
int sm = pio_claim_unused_sm(pio, true);
if (sm < 0) {
printf("Unable to claim state machine, err: %d\n", sm);
return false;
}
When reviewing: flag hard-coded pin numbers, hidden hardware side effects, unchecked PIO/UART resource setup, and lwIP calls that violate the local CYW43 locking pattern.
Rule 8 - Treat FreeRTOS tasks, queues, and semaphores explicitly
Task code favors visible loops, explicit queue commands, and simple state machines. Task functions use void *p or void *args, cast near the top or at use sites, then loop.
Creation commonly uses xTaskCreate(...) with literal task names, stack sizes such as configMINIMAL_STACK_SIZE or module-specific values, and explicit priorities. New code should check queue/semaphore allocation and task creation when practical.
Right:
wireless_ctrl_queue = xQueueCreate(5, sizeof(wireless_ctrl_t));
if (!wireless_ctrl_queue) {
printf("Unable to create wireless control queue\n");
return;
}
Use vTaskDelayUntil(...) for periodic loops that should keep cadence, and vTaskDelay(pdMS_TO_TICKS(...)) for simple sleeps.
When reviewing: flag hidden background behavior, unbounded busy loops after the scheduler starts, queue item-size mismatches, blocking calls in high-priority paths without a clear reason, and missing synchronization around shared display buffers or shared hardware.
Rule 9 - Build u8g2 and MUI views directly
Display code is intentionally imperative: clear the buffer, set font, draw strings/lines/shapes, send the buffer, and delay at the required cadence. Keep layout calculations local and readable.
Use the display access helpers where shared buffer access matters:
get_display_handler()acquire_display_buffer_access()release_display_buffer_access()
Right:
u8g2_t *display_handler = get_display_handler();
u8g2_ClearBuffer(display_handler);
u8g2_SetFont(display_handler, u8g2_font_helvB08_tr);
u8g2_DrawStr(display_handler, 5, 10, title_string);
u8g2_SendBuffer(display_handler);
When reviewing: flag display updates from multiple tasks without a clear locking or ownership story, oversized UI abstractions, and text drawing that can exceed fixed display buffers without bounds checks.
Rule 10 - Keep REST handlers small and static-buffer based
REST endpoint handlers usually accept struct fs_file *file, int num_params, char *params[], char *values[], update live settings from compact parameter names, and return static response buffers with FS_FILE_FLAGS_HEADER_INCLUDED.
Prefer bounded formatting:
static char json_buffer[256];
snprintf(json_buffer,
sizeof(json_buffer),
"%s{\"enabled\":%s}",
http_json_header,
boolean_to_string(enabled));
Do not expose secrets such as WiFi passwords in responses. Preserve the existing compact parameter mapping style (w0, m1, c13, ee) unless the user asks for an API redesign.
When reviewing: flag response buffer overflow risk, returning stack memory through file->data, unsanitized secret output, and failing to set file->len, file->index, and file->flags.
Rule 11 - Use memory allocation conservatively
This firmware uses standard C allocation (malloc, free) in project code and C++ objects in selected C++ modules. Keep allocations bounded, check for NULL, and free on every failure path.
Prefer static buffers for small HTTP responses, display strings, and fixed hardware data where the existing module does. Avoid long-lived heap allocations in fast control loops unless there is a clear ownership model.
Right:
uint8_t *buf = malloc(write_size);
if (!buf) {
printf("Unable to allocate buffer with size: %d\n", write_size);
return false;
}
...
free(buf);
When reviewing: flag unchecked allocation, allocator mismatches, stack buffers that are too large for FreeRTOS task stacks, and heap use inside timing-sensitive loops.
Rule 12 - Comments explain hardware intent, units, and compatibility
Comments should explain hardware intent, timing assumptions, EEPROM compatibility, units, REST parameter mappings, and concurrency assumptions. Keep comments short and practical. Preserve useful TODO, FIXME, and NOTE markers when they describe real incomplete work or constraints.
Wrong:
enabled = true;
Right:
busy_wait_us(20);
When reviewing: flag misleading comments and empty narration, but do not demand Doxygen for every internal helper. Public headers may use brief comments where the surrounding header already does.
Rule 13 - Keep C++ as a bridge, not a second architecture
Use C++ where it is already needed for helper classes or modules such as FloatRingBuffer and selected mode implementations. Keep public headers C-callable with extern "C" guards when C modules need to call them.
Right:
#ifdef __cplusplus
extern "C" {
#endif
bool charge_mode_config_init(void);
#ifdef __cplusplus
}
#endif
Avoid introducing classes, templates, exceptions, RTTI-heavy patterns, STL containers, or broad C++ architecture into firmware modules unless the surrounding module already depends on them and the user explicitly wants that direction.
When reviewing: flag C++ abstractions that make firmware control flow harder to inspect or call from C.
Rule 14 - Keep CMake changes local and Pico SDK-native
Top-level CMake uses Pico SDK initialization, FreeRTOS import, u8g2, Trinamic interface sources, and src/CMakeLists.txt for generated/support targets. Preserve this structure.
Prefer:
target_sources(...) for explicit generated or library-owned source additionstarget_link_libraries(...) for Pico SDK hardware libraries such as hardware_pio, hardware_spi, hardware_i2c, hardware_pwm- target config include paths through
PICO_BOARD_HEADER_DIRS and targets/
Do not vendor new dependencies into library/ or alter SDK import behavior unless the user asks for that scope.
Review Workflow
When asked to review C/C++ code:
- Read the file or diff in full, plus the nearby header/source pair when relevant.
- Prioritize behavioral risks first: hardware resource claims, task/queue/semaphore safety, display buffer concurrency, EEPROM compatibility, REST buffer lifetime/size, PIO/UART timing, CYW43/lwIP locking, and memory ownership.
- Then list style violations against these rules with file and line references.
- Suggest the smallest correction that matches the surrounding module.
- If no issues are found, say so and mention any residual test or hardware-verification gap.
When writing C/C++ code:
Apply these rules before editing. Match the current file's local conventions, keep edits scoped, and prefer existing helpers and patterns over new abstractions.
