원클릭으로 Manus에서 모든 스킬 실행

enc28j60-fase-actual

스타10

포크0

업데이트2026년 5월 7일 18:58

Active context for the ENC28J60 app refactor. Consult before any commit, file creation, or direction change. Phase 0 closed and merged to main on 2026-05-07.

설치

Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.

Manus에서 실행

출처

ElectronicCats

ElectronicCats/flipper-ENC28J60-ethernet

GitHub 저장소 열기 Creator 저장소 보기

다운로드

Manus에서 실행

Current phase: F0 closed (v2.0). F1 not yet started.

Where we are now

Phase 0 refactor merged to main via PR #7 on 2026-05-07 (merge commit e972464). Local + remote main carry v2.0.
27 phase tags created locally (v2.0-f0.0 .. v2.0-f0.5h) plus the release tag v2.0 on the merge commit. Push status of these tags fluctuates — verify with git ls-remote --tags origin 'v2.0*' if it matters; only v2.0-f0.5h was confirmed on origin at close time.
Pre-commit hooks active in this repo (.pre-commit-config.yaml has trailing-whitespace, end-of-file-fixer, no-commit-to-branch, clang-format, conventional-pre-commit). pre-commit install was run; subsequent commits are validated automatically.
Build artifacts are no longer tracked: dist/, *.fap, *.elf, compile_commands.json, etc. are in .gitignore since F0.5f. Distribution path: GitHub Release on tag v2.0 (manual upload of the .fap) until F0.8 lands a CI workflow.

What is done (high-level — see commit log + tags for details)

Phase	Tag(s)	Summary
F0.0	v2.0-f0.0	Bootstrap, license carve-out, INT pin researched, SDK pinned, issue templates, project skill.
F0.1	v2.0-f0.1	`App.scan_params` centralizes 7 file-static `target_ip`s across 6 scenes.
F0.2	v2.0-f0.2	`libraries/settings/{c,h}` persists MAC/IP/`is_static_ip`/scan_params via `flipper_format`. v2 schema (F0.5f) adds `is_dora`, gateway IP, gateway MAC.
F0.3a-e	v2.0-f0.3a..e	`libraries/scanner/scanner_session.{c,h}` primitive. ping_thread, arp_scan, port scan, OS probe, ICMP probe migrated.
F0.4a-g	v2.0-f0.4..f0.4g.1	RX dispatcher decoupling. INT-driven (F0.5c). Auto-ARP / auto-ICMP handlers. `app_worker.c` deleted (F0.4e). DORA in alt thread. `arp_get_specific_mac` migrated for `scanner_resolve_next_hop` (F0.4f). PingScene migrated off direct `receive_packet` (F0.4g.1).
F0.5a-h	v2.0-f0.5a/c/d/d-wave2/e/f/g/h	Chip-level mutex (B-6 closed). INT pin enabled (D2). Race fixes: H2 send→register, H3 handler-out-of-mutex UAF, H4 App malloc, H5 mac_helper sized [6], M7 pause kicks thread. PCAP overflow guards. Settings v2 + DORA cancellable. UDP redundant-ARP removed. OS Detector quick wins + EXPERIMENTAL label. F0.5b skipped intentionally — chip protocol forces a CS toggle per command, no real win from a "bulk SPI" rewrite.
F0.6	(rolled into F0.5* commits)	Dev scaffolding cleanup: TestingScene, ofp_tseq, dead `flipper_process_dora`, prod printf hex-dumps, etc.
F0.7	(rolled into F0.5* commits)	Eight audit bugs: PCAP timestamps, is_duplicated_ip underflow, tcp_send_xmas_probe, MAC/subnet length mismatch, TCP fall-through, pcap_scan overflow, pre-DORA auto-reply IP conflict, MainMenu logo blocking.

docs/ARCHITECTURE.md (rewritten as v2.0 reference, F0.5h closure) has the structured layer/threading/RX-flow view. docs/BACKLOG.md tracks closed and deferred items.

What's deferred to F1 (in BACKLOG.md)

B-9 OS Detector reliability rewrite (RX vs dispatcher race, sample-slot collision, premature PORT_OPEN, blocking UI). v2.0 ships labelled EXPERIMENTAL.
F0.4g.2 os_detector burst-probe RX onto rx_dispatch handler.
B-7 follow-up delete dead tcp_handshake_process / _spoof, migrate arp_get_specific_mac callers in ArpSpoofingSpecificIP.
F0.8 dual-build CI (admin / pentest .fap variants).
PCAP per-batch flush.
Protocol expansion (LLDP, mDNS, IPv6, responder family).
F0.0 Task 9 (manual UI) — enable GitHub Discussions in Settings → Features.

What NOT to touch

Driver files (libraries/chip/enc28j60.{c,h}) keep the GPL-2.0-or-later SPDX header. New code added to them inherits the license. Don't rename ETHERCARD_* macros — they document the derivation boundary.
enc28j60_t.mutex (F0.5a) — every public chip function takes it. Static helpers (write_register, set_bank_with_mask, etc.) do NOT take it; they inherit from the caller.
The remaining rx_dispatch_pause/resume callsite in GetIPScene.c (around DORA) — the DHCP state machine consumes raw packets in order; the chip mutex isn't enough. Don't remove this until DORA itself migrates onto an rx_dispatch handler (F1).
scanner_wait_for_packet's contract: predicate captures state via pred_ctx; rx_buffer is NOT preserved after the wait returns (F0.5g doc fix). Don't write callers that re-read the frame.
Handlers run inside the dispatch mutex (F0.5d). Keep them fast, no register/unregister inside, no slow I/O. SnifferScene's ~30 ms SD write is the slowest one tolerated; document any new slow handler.
application.fam — no SDK pin (Unleashed unlshd-087 doesn't support fap_min_sdk_version).
ARP-spoof-to-IP feature — gated by DEV_MODE. F0.8 will introduce PENTEST_MODE and re-gate.

Repo conventions

All commit messages in English. Conventional Commits required by pre-commit hook. Do not put dots in scope — fix(f0.5f): is rejected by the parser; use fix: F0.5f — ... instead.
Annotated tags v<MAJOR>.<MINOR>-f<N>.<M> for each sub-phase that warrants a checkpoint.
Hardware-validate on a Flipper before tagging a phase final whenever the device is available. Test rig at /tmp/eth-testrig-up.sh / eth-testrig-down.sh brings up 10.10.10.0/24 + dnsmasq + http.server + tcpdump on the laptop's USB ethernet adapter (default enx000ec6be9018).
Don't claim files are "dead" without a fresh grep -rn over EthernetAppDemo confirming zero callers across the project, including header-only references.
After Edit batches, always grep / git diff before commit to confirm the changes actually landed (see ~/.claude/projects/.../memory/feedback_verify_batched_edits.md).

Quick references

Active backlog: docs/BACKLOG.md (B-9 active; B-1..B-8 closed).
Architecture: docs/ARCHITECTURE.md (v2.0 reference).
Decisions: docs/DECISIONS.md (D1 license, D2 INT pin, D3 SDK).
Hardware: docs/HARDWARE.md.
Master plan (historical): ENC28J60_REFACTOR_PLAN.md at the root.
F0.x plans: docs/superpowers/plans/.
Test rig scripts: /tmp/eth-testrig-up.sh, down.sh. Pcap to /tmp/eth-testrig.pcap.
Flipper CLI debug: /tmp/flipper-log.py (pyserial @ 230400 on /dev/ttyACM1) and /tmp/flipper-cmd.py.

name	enc28j60-fase-actual
description	Active context for the ENC28J60 app refactor. Consult before any commit, file creation, or direction change. Phase 0 closed and merged to main on 2026-05-07.