testsprite-verify

name

testsprite-verify

description

TestSprite verification loop — after finishing a feature or fix in a TestSprite-tested repo, use the `testsprite` CLI to run the relevant TestSprite tests against the change and inspect any failure artifacts before reporting the work as done. Use whenever code has changed outside docs/config and is about to be reported complete — by running an existing test that covers the change, or by creating a new TestSprite test (a frontend plan, or a backend Python assertion) and running it to a terminal verdict.

TestSprite Verification Loop

The verification loop that flies your just-shipped feature through the TestSprite CLI and reports back.

You just finished a piece of work in a TestSprite-tested repo. Before you report it done, actually run the relevant TestSprite test(s) through the testsprite CLI and read the result. Spec review and unit tests catch correctness; only running the test catches what breaks for a real user.

When to run

Run after a feature or fix lands — one feature → one test run, at the moment it lands, not batched at the end. Tests you create this way accumulate into the project's TestSprite suite; before writing a new one, check testsprite test list for an existing test that already covers the behavior and extend it instead of duplicating.

The CLI tests a deployed URL — it doesn't build or host your environment. Run the loop only once the change is live somewhere reachable (e.g. open the PR, let CI deploy the preview/staging environment) and pass that URL as --target-url. Running earlier verifies the previous build, not your change.

When to skip

The skip list is narrow:

• Docs-only edits (docs/**, *.md, comments).
• Pure build/config edits (tsconfig*, lint/prettier config, lockfile bumps with no behavior change).
• This repo isn't actually wired to TestSprite (no project linked, no creds). Don't pull the user into a setup flow they didn't ask for — say so and stop.

Otherwise, run it.

The one-test minimum

Every shipped feature gets at least one TestSprite run to a terminal verdict (passed / failed / blocked / inconclusive) before you call it done. What counts:

• testsprite test create … --run --wait returning a terminal verdict, or
• testsprite test run <id> --wait against an existing test, or
• testsprite test create-batch --plans plans.jsonl --run --wait (or two-step: create-batch, then test run <id> --wait) on at least one test returning a terminal verdict.

What does not count: unit tests / typecheck / lint; drafting a plan without --run; asking the user to run it for you.

If you can't satisfy this — no creds, no valid target URL, repo not linked — say so explicitly: "Feature shipped but I could not run any TestSprite test because . Treat this as unverified until that's resolved." Don't claim done.

1. Preflight

testsprite --version              # CLI installed?
testsprite auth whoami            # credentials configured?

• --version fails → the CLI isn't installed. Tell the user to install the TestSprite CLI (see the TestSprite docs) and stop; don't install it for them.
• auth whoami fails → no credentials. Tell the user they can run testsprite auth configure, then stop.

2. Find the project

In priority order:

1. $TESTSPRITE_PROJECT_ID if set.
2. .testsprite/config.json in the repo root, if it has a projectId.
3. testsprite project list --output json → match a project whose name looks like this repo (e.g. a Portal repo → the Portal project).
4. Still ambiguous → list the candidates and ask the user which to use (one short question; picking the wrong project wastes a run).

3. Decide what to test

Look at the diff (git diff --stat, then the changed files) to understand what user-facing behavior changed. Pick one sub-mode. For a brand-new feature the right default is almost always (b) or (c); (a) is for tweaks to behavior an existing test already covers.

(a) An existing test covers the change

testsprite test list --project <projectId> --output json
testsprite test list --project <projectId> --status failed --output json   # what's already red

Heuristic: a change to src/components/CheckoutForm.tsx is more likely covered by "Checkout happy path" than "Login flow." Frontend change → type: frontend; backend → type: backend.

(b) A new test for the change (most common)

Frontend — draft a plan.json. You name the behavior and list steps in plain language; you don't write browser code.

{
  "projectId": "prj_abc",
  "type": "frontend",
  "name": "Booking date range change updates the estimated total",
  "description": "When a user opens a listing and extends the booking date range, the booking-panel estimated total updates to reflect the new dates before payment.",
  "priority": "p1",
  "planSteps": [
    { "type": "action", "description": "Navigate to the homepage" },
    { "type": "action", "description": "Search for stays with a valid destination and date range" },
    { "type": "action", "description": "Open a listing from the search results" },
    {
      "type": "action",
      "description": "Select an initial short date range to view the estimated total",
    },
    { "type": "action", "description": "Change the date range to a longer stay" },
    {
      "type": "assertion",
      "description": "Verify the estimated total on the booking panel updates from the initial value to reflect the new longer dates",
    },
  ],
}

• name — an assertable behavior statement (subject + verb + outcome), not a noun fragment — e.g. "Booking date range change updates the estimated total" tells the testing agent what to verify; "date range" tells it nothing.
• description — the condition + expected outcome in one sentence; disambiguates a short name.
• priority — p0 (must-pass) / p1 (important paths) / p2 (edge) / p3 (cosmetic). Pick honestly.
• planSteps — Array<{ type: 'action' | 'assertion', description: string }>, max 200 steps / 256 KB. Describe user intent, not selectors.

Backend — write the Python yourself and use --code-file. There is no server-side codegen on the CLI. Read the API surface that changed (OpenAPI, the route handler, request/response shapes) and write a pytest-style assertion script to a tempfile:

# /tmp/login-empty-password.py — runs against the project's target URL, creds injected.
import requests

def test_login_rejects_empty_password():
    r = requests.post(f"{TARGET_URL}/login", json={"email": "a@b.c", "password": ""})
    assert r.status_code == 400
    assert r.json().get("error") == "invalid password"

Backend tests that share state declare dependencies at create time. For a one-off verification, prefer a single self-contained script (log in inside the same file). But when the coverage set splits naturally into producer → consumer → cleanup — one test captures an auth token or created-resource id that others reuse — declare the graph with the dependency flags instead of duplicating setup in every file:

# producer — captures a variable for later waves
testsprite test create --type backend --project <projectId> --name "login issues an auth token" \
  --code-file /tmp/login.py --produces auth_token

# consumer — scheduled in a wave after every producer it names
testsprite test create --type backend --project <projectId> --name "profile update accepts the issued token" \
  --code-file /tmp/profile.py --needs auth_token

# cleanup — always scheduled in the final wave
testsprite test create --type backend --project <projectId> --name "fixture user is deleted" \
  --code-file /tmp/cleanup.py --category teardown

• --produces <var> / --needs <var> are repeatable. All three flags are backend-only — combined with --type frontend the CLI exits 5.
• Don't hand-sequence test run calls to fake ordering. The wave engine owns ordering: trigger the set with test run --all (§4) and producers run before consumers, teardown last. Chaining run A --wait && run B --wait yourself loses the engine's variable passing and conflicts with concurrent runs.
• Declarations are currently create-only. test update cannot amend them and test get / test list don't echo them back, so note what each test produces/needs as you create it; changing the graph later means delete + recreate.

Show the user the drafted plan / code before creating it — creating writes to their project. One short confirmation; let them edit the tempfile first.

Authoring planSteps the testing agent will execute reliably

Execution reliability tracks plan wording. A loose plan produces a confidently-wrong passed (bare visibility assertions) or a thrashing blocked. Write to these rules first:

• One verb per step. and / then between two verbs → split — e.g. "Search for stays and open the first result" becomes two steps.

• Describe outcomes, not selectors. The testing agent locates targets semantically — describe the intent and the match stays robust across copy changes; a guessed literal label defeats that. E.g. write "Submit the form", not "Click the blue 'Submit' button".

• Navigate to only on step 1 (or a login page). Use clicks for every later transition — direct URLs break SPA routing.

• FE plans narrate a user journey through their actions. Each action is what a real user does (click, type, navigate, hover, scroll), forming a sequence that exercises what gives the feature its value. The final assertion verifies what the journey produced — the state the user arrived at, a comparison against an earlier state, a derived count — not just that the starting page rendered.

• Name the target entity type, not a fuzzy noun. If a page has several look-alike row kinds, "open a thing" lets the testing agent pick the wrong kind. Name the type and the page/view you expect to land on.

• 1–2 assertions, at the end, on whether the content is present and actually works (see presence ≠ working below) rather than UI copy / formatting. (Quoting a literal you submitted earlier in the same plan, to verify it round-trips, is fine.)

• Presence ≠ working. A node can exist yet be broken or wrong — e.g. an <img> whose src 404s renders a broken-image box but still passes "element present / has alt." Assert the thing actually works and is correct, not just that the tag exists; trust the testing agent to judge correctness rather than hard-coding the expected answer into the assertion.

• Assertion targets name the specific page region (panel / tab / output area). Otherwise the testing agent settles for "some element with that text is visible anywhere," which passes for wrong reasons.

• For visual / CSS / layout-sensitive features, content-presence-only assertions are dangerous. "Verify the methodology section is visible" passes even when the stylesheet is missing and three cards render as flat unstyled text stacked vertically — the strings exist on the page, and a content-presence assertion constrains nothing about layout. For any feature whose value depends on layout, include at least one assertion that names geometry or relative position (row, column, side-by-side, stacked, grid, above/below, span, card background, border), not just content existence:

  // BEFORE — content-presence-only (passes even on broken CSS)
  { "type": "assertion", "description": "Verify the methodology section with three sub-score formulas is visible" }
  
  // AFTER — content + layout
  { "type": "assertion", "description": "Verify the methodology section shows three card cells laid out side-by-side in a single horizontal row, each with a distinct card background and a heading; the three cards together span the full content width" }
  

• Keep description and planSteps in scope agreement — the testing agent reads description as the test's purpose and shrinks execution to match. If you change the steps, re-align the description.

• Keep flows that depend on state outside the test's control out of scope: third-party auth (OAuth/SSO/2FA), OS-native surfaces (file upload/download, drag-and-drop, native dialogs), cross-context state (iframes, multi-tab, external services). Pick a different verification.

• Test data must be self-contained — create what you need within the plan, or don't write the plan.

(c) A coverage set — multiple FE plans as a batch

When a FE feature has distinct paths (happy + error + edge), draft a plans.jsonl, one spec per line. Aim for 2–5 plans; more only with explicit user confirmation. Max 50 plans / 5 MB per batch.

// plans.jsonl — FE only
{"projectId":"prj_abc","type":"frontend","name":"login happy path","planSteps":[...]}
{"projectId":"prj_abc","type":"frontend","name":"login wrong password","planSteps":[...]}
{"projectId":"prj_abc","type":"frontend","name":"login empty email","planSteps":[...]}

Batch is FE-only. For 3 backend tests, run test create --type backend --project <projectId> --code-file <file> three times with three Python files.

(d) Refine an existing test

• FE — replace the steps, then re-run:

  testsprite test plan put <test-id> --steps refined.json
  

• BE — write updated Python and replace the code (optimistic concurrency):

  testsprite test code put <test-id> --code-file refined.py --expected-version <current-version>
  

4. Run

All variants use --wait for a synchronous verdict, --target-url <env-url> for the deployment under test, and --timeout 600 as a sane default.

# (a) existing test
testsprite test run <test-id> --target-url <env-url> --wait --timeout 600 --output json

# (a-rerun) cheap replay of an existing test. FE: replays the saved script (auto-heal on — more
# lenient than a fresh run; for strict verification of a new change prefer `test run`).
# BE: dispatches the WHOLE dependency closure — producers and teardowns run too, not just <test-id>,
# so expect their side effects (fixtures re-created, teardown deletes) and extra runs in history.
testsprite test rerun <test-id> --wait --timeout 600 --output json
testsprite test rerun <test-id> --skip-dependencies --wait --timeout 600   # BE: named test only

# (b-FE) new FE test from plan
testsprite test create --plan-from plan.json --run --wait --target-url <env-url> --timeout 600

# (b-BE) new BE test from Python (backend create needs --project)
testsprite test create --type backend --name "..." --project <projectId> --code-file foo.py --run --wait --target-url <env-url> --timeout 600

# (b-BE coverage set with dependencies) create each test without --run, then one wave-ordered batch
testsprite test run --all --project <projectId> --wait --timeout 600 --output json
testsprite test run --all --project <projectId> --filter <name-substr> --wait --timeout 600   # subset by name

# (c) FE coverage set — single-call create + run (FE-only)
testsprite test create-batch --plans plans.jsonl --run --wait \
  --target-url <env-url> --max-concurrency 3 --timeout 600 --output json
# Two-step alternative (inspect before running):
#   testsprite test create-batch --plans plans.jsonl --output json
#   then trigger each id: testsprite test run <test-id> --wait --target-url <env-url> --timeout 600

# (d-FE) refine + re-run
testsprite test plan put <test-id> --steps refined.json && \
testsprite test run <test-id> --target-url <env-url> --wait --timeout 600

# (d-BE) refine BE code + re-run. NOTE: if you reach for `test rerun` here instead, a BE rerun
# dispatches the full producer/teardown closure — use --skip-dependencies while iterating on one
# script (producers already verified this round), then finish with a closure run before reporting.
testsprite test code put <test-id> --code-file refined.py --expected-version <current-version> && \
testsprite test run <test-id> --target-url <env-url> --wait --timeout 600

Key behaviors:

• --target-url must be an allowed project/environment URL. The CLI rejects localhost / RFC1918 / link-local — local-only changes can't be run here. If the feature is deployed only locally, say so and skip the run.
• --wait long-polls until terminal and handles its own backoff — don't wrap it in a retry loop.
• Exit codes: 0 = passed; 1 = failed / blocked / cancelled; 7 = timeout. Treat 7 as inconclusive (resume with testsprite test wait <run-id>), not a regression.
• Batch: create-batch --run --wait creates the tests (FE-only) and fans out triggers in one call (bounded by --max-concurrency), emitting { results: [...] } that mirrors the single-test test run --wait envelope. Exit 0 if every run passed; 1 for any failed/blocked/ cancelled or trigger error; 7 only when EVERY run timed out. Drop --run if you want to inspect the created tests before triggering.
• Run-trigger rate limit is 60/min/key, server-enforced; the CLI self-throttles to 50/min. --max-concurrency (default 50) does NOT raise the server cap — excess triggers return RATE_LIMITED (per-spec in batch JSON; exit 11 for single test run). The test row stays created, the run never started. A full create-batch (≤50 specs) fires all at once under the cap. The 50/min throttle is per-invocation — separate batches/processes don't share it — so for >50 specs in a minute you lean on the server's 60/min cap + RATE_LIMITED retries, not client queuing. Re-list and check draft rows — "tests created" is not the same as "runs triggered".
• Backend execution is dependency-aware; frontend is not. test run --all --project <id> triggers a fresh wave-ordered batch over the project's backend tests (producers → consumers → teardown last); FE tests in the project are skipped with an advisory, and everything not dispatched is enumerated (conflicts / deferred / skippedFrontend) so don't count accepted[] alone. test rerun <be-id> expands the producer/teardown closure by default — stderr summarizes Reran N tests: 1 selected + P producer(s) + T teardown(s), and failed members surface as closureFailures[] without flipping the exit code. Pass --skip-dependencies only when this round already verified the producers and you're iterating fast on one script.
• test code put needs --expected-version <codeVersion>; stale etag → exit 6, re-fetch via test get <id> and retry. --force bypasses but is audit-logged.
• Idempotency: the CLI auto-mints an Idempotency-Key; replays within 24h return the original test/run.

4a. Read the result — plan, or product?

Don't take the verdict at face value. After a run, pull the steps (testsprite test steps <test-id> --output json) and ask: plan quality, or actual product behavior?

The plan is the problem (most common — check first) when:

• recorded action count < plan action count → steps the plan left ambiguous were skipped;
• assertions degraded to bare "Verify element is visible" with no subject;
• 5+ consecutive click attempts on similar targets with no progress.

The product/environment is the problem (believe these) when:

• cause / error names a concrete app observation ("the panel renders read-only", "page 404s");
• the trace blames infra (deploy lag, auth gate, missing fixture).

Scope step counts to the current run — test steps is cumulative across runs; filter on the run-id before counting.

Read the testing agent's failure summary skeptically — it can conflate two failure phases. When a flow produces an artifact that then runs against an external target, "the backend returned an error" may mean the action endpoint itself failed (feature broken) or the action succeeded and the produced artifact failed later at runtime (orthogonal to your feature). Cross-check the step trace and runtime output: if the runtime output references a literal you submitted earlier in the plan, the action succeeded and the error is runtime-phase.

BE closure runs: root-cause the earliest failed wave, not the selected test. When a rerun or run --all expanded a dependency closure and a producer failed, every consumer downstream of it fails or blocks by starvation (missing token / missing fixture). The selected test's red verdict does not implicate your feature — report it as failed-downstream, pull the producer's artifact first, and only blame the consumer once its producers pass in the same run.

If it's the plan: tighten via test plan put and re-run once (two runs total), then stop. Don't grind. If it's the product/env: report the verdict with the testing agent's observation; don't auto-fix on the recommendation alone. If you genuinely can't tell: report inconclusive with the signal that triggered the call and ask.

5. On failure → download the artifact

testsprite test artifact get <run-id> --out ./.testsprite/runs/<run-id>/

Inspect the failure bundle (result, failed step + neighbors, video, root-cause hypothesis, recommended fix target) before deciding whether your change caused it.

6. Report

When you tell the user the feature is done, include:

• Which test(s) you ran — one line each: id, name, verdict. At least one terminal verdict is required; zero means the feature is not done — surface that.
• The verdict. Don't report passed if §4a's sanity check tripped — surface as inconclusive with the specific signal.
• If the user wants to inspect a test or run themselves, point them at the dashboard link from the CLI output (dashboardUrl in JSON; a Dashboard: line in text mode) — test create and --wait terminal output carry one.
• If failed, a one-line summary of the bundle's root-cause hypothesis and recommended fix target. Don't auto-fix on that alone — the recommendation can be wrong; the human should look.