메뉴
Run the common ESP32 workflow in PlatformIO: build, flash, monitor, diagnose, patch, and retry. Use for ESP32/ESP8266/ESP32-S3/ESP32-C3 projects using Arduino or ESP-IDF.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
SOC 직업 분류 기준
Bring up a new embedded board or create a minimal working firmware project with PlatformIO. Use when setting up a new project, identifying a connected board, creating a blink or serial smoke test, verifying build/flash/boot, or confirming the board is alive.
Validate firmware behavior on real hardware rather than compilation-only checks. Use when running physical acceptance tests, confirming boot markers, validating sensor output, or checking runtime timing/telemetry.
Diagnose and fix PlatformIO build, upload, and configuration failures. Use when resolving compiler errors, missing libraries, platformio.ini issues, memory overflows, port conflicts, permission errors, or failed uploads.
Deploy and validate services on single-board computers such as Raspberry Pi, Jetson, Orange Pi, BeagleBone, and Coral. Use when checking SSH connectivity, runtime dependencies, logs, service health, Docker workloads, or systemd deployment.
Diagnose embedded runtime behavior through serial logs after build/upload. Use when investigating boot loops, crashes, watchdog resets, panic output, missing boot markers, peripheral initialization issues, or silent serial sessions.
Use when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems.
| name | esp32-flash-monitor |
| description | Run the common ESP32 workflow in PlatformIO: build, flash, monitor, diagnose, patch, and retry. Use for ESP32/ESP8266/ESP32-S3/ESP32-C3 projects using Arduino or ESP-IDF. |
Use this skill for the common ESP32 workflow: build, flash, monitor, diagnose, patch, and retry.
esp32dev
esp32-s3-devkitc-1
esp32-c3-devkitm-1
nodemcu-32s
lolin_s2_mini