babysit

name	babysit
description	Watch one or more AO worker tmux sessions, classify their state (WORKING/IDLE/QUEUED/DEAD/COMPLETED), auto-remediate known failures (trust TUI, queued prompt), and push-notify on stuck sessions. Reuses ao-session-monitor state detection. Use /babysit to start a monitoring loop on a specific worker, all active workers, or workers matching a PR/branch.
type	skill

Babysit — AO Worker Supervisor

Purpose: Watch AO worker tmux sessions, classify state, auto-remediate known failures, and notify on stuck or dead shells. Sits alongside the launchd-managed ao lifecycle-worker (which runs the system-level reaction/poll loop) — babysit is the Claude-side observer for individual spawned sessions.

Use when:

• You just spawned an AO worker (ao spawn / ao spawn -p project "...") and want to keep an eye on it
• An existing worker has been "Baked for Xm" too long and you want a programmatic check
• You suspect the agy/antigravity trust TUI is blocking a worker (bd-jya0)
• You want a per-worker "what is each one doing right now" snapshot
• A worker is queued (lifecycle-worker sent it a message) but not acting

Do NOT use when:

• The system-level reaction loop is broken (use /auton — it diagnoses the jleechanclaw + AO autonomy chain end-to-end)
• A specific worker has a known error (use /ao-lifecycle-triage for log-driven triage)
• You want to spawn a worker (use /ao-worker-dispatch)
• You want to detect the state of a single pane once (use /ao-session-monitor — babysit uses it internally for one-pane detection but is multi-worker / multi-cycle)

Cross-references

Skill	When to use instead
/ao-session-monitor	Single pane, one-shot classification (babysit embeds the same one-liner)
/babysit-openclaw	Slack-thread-based openclaw monitoring (different model — openclaw posts to Slack; AO workers use tmux)
/auton	System-level: why is the autonomous chain not driving PRs to N-green?
/ao-lifecycle-triage	One stuck worker, deep log dive
/ao-spawn-gate	Pre-spawn resource check

State classification (from ao-session-monitor)

Indicator	State	Babysit action
✻✶✳✽✾ + duration, Running…, Bash(/Read( etc. in last 20 lines	WORKING	No action — log every 5 min
Baked for Xm or Sautéed for Xm and X ≥ 30	STALLED-COMPLETED	Push-notify: "Worker has been completed-but-untouched for Xm — review output"
❯ prompt with no activity indicators in 20 lines	IDLE	If lifecycle-worker should have sent a message, push-notify
Press up to edit queued messages	QUEUED	If queued > 10 min, push-notify (worker may be stuck on input)
Trust TUI: "Do you trust the contents of this project?" with no auto---add-dir	TUI-BLOCKED	Auto-remediate: send Enter to select "Yes, I trust this folder"
+uncommitted in status bar with no recent Bash(git in 25 lines	HAS-WORK-NO-COMMIT	Push-notify at 15 min: "Worker has uncommitted edits and is not committing"
Pane dead (no ❯, no activity indicators, no recent tool output) for > 5 min	DEAD	Push-notify: "Worker tmux pane is dead — manual respawn required"

Auto-remediation policy (user-scope, opt-in)

• Trust TUI (Do you trust...): send Enter once. Only if the prompt is visible. Never send on a ❯ prompt without the trust question.
• Queued prompt with Enter required: do not send — this is destructive. Push-notify only.
• Dead shell: NEVER auto-respawn. Push-notify with the spawn command you would have used. User decides.
• Stalled completed: NEVER auto-respawn or auto-commit. Push-notify.
• Idempotency: each remediation is gated on a sentinel — do not send Enter twice in 60s, do not push-notify the same condition twice in 30 min.

Modes

Mode 1 — One-shot snapshot (no loop)

/babysit snapshot [session-name]
/babysit snapshot              # all ao-* sessions
/babysit snapshot ao-6312      # one session

Runs the ao-session-monitor one-liner, prints the table, exits.

Mode 2 — Watch a single worker

/babysit watch <session-name> [--max-min N]
/babysit watch ao-6312 --max-min 60

Polls every 60s. Auto-remediates TUI/queue. Push-notifies on stalled/dead. Exits when:

• Worker reaches COMPLETED and PR is merged/closed (then push-notify "Worker finished cleanly")
• User says stop / cancel
• --max-min reached (default 90)
• Worker enters DEAD state

Mode 3 — Watch all active AO workers

/babysit watch-all [--max-min N]

Same as Mode 2, but applies to all ao-* tmux sessions. Per-worker status table printed every 5 min.

Mode 4 — Watch by PR/branch

/babysit pr <PR#|branch> [--max-min N]
/babysit pr 661
/babysit pr fix/bd-rgk0-skeptic-cron-trigger-age-filter

Resolves the PR/branch → tmux session via ao list and the worktree's git state, then watches.

Internals

Detection primitive (from ao-session-monitor)

for s in $(tmux list-sessions 2>/dev/null | grep "ao-[0-9]" | cut -d: -f1); do
  name=${s##*-}
  last=$(tmux capture-pane -t "$s" -p -S -20)
  pr=$(echo "$last" | grep -oE "PR: #[0-9]+" | head -1)
  uc=""; echo "$last" | grep -q "uncommitted" && uc="+uc"
  activity=$(echo "$last" | grep -oE "[✻✶✳✽✾] [A-Za-z]+…[^)]*\)" | tail -1)
  if [ -n "$activity" ]; then echo "  $name: WORKING $pr $uc ($activity)"
  elif echo "$last" | grep -qE "Baked|Sautéed"; then echo "  $name: completed $pr"
  elif echo "$last" | grep -q "queued"; then echo "  $name: QUEUED $pr"
  else echo "  $name: idle $pr $uc"
  fi
done

TUI-block detection (bd-jya0)

tmux capture-pane -t "$s" -p -S -30 | grep -q "Do you trust the contents of this project" \
  && tmux send-keys -t "$s" Enter

Pre-check: only send Enter if no Enter has been sent in the last 60s (sentinel file ~/.cache/babysit/${s}.last_enter).

Push notification (Claude native)

from claude_code import push_notification  # conceptual
# Use the PushNotification tool with:
#   message: "ao-6312 stalled-completed for 35m — review output"
#   status: proactive

Cap: 1 push per session per 30 min. Sentinel: ~/.cache/babysit/${s}.last_notify.

Watch loop

The bash one-liner runs every 60s. Each iteration:

1. Refresh state for all watched sessions
2. Apply remediation policy (TUI-block, idempotent)
3. Diff against last seen state — only push-notify on transitions (WORKING→STALLED, IDLE→QUEUED+10m, etc.)
4. Print table every 5 min (or on every transition, whichever is less noisy)

Sentinel layout

~/.cache/babysit/
  ao-6312.last_enter          # epoch ms of last Enter sent
  ao-6312.last_notify         # epoch ms of last push-notify
  ao-6312.last_state          # WORKING|IDLE|QUEUED|DEAD|COMPLETED|TUI
  ao-6312.started_at          # epoch ms of first observation

Stop conditions

• Watch loop exits on: user stop, --max-min reached, DEAD state, COMPLETED + PR merged
• One-shot snapshot always exits after one pass
• If the user is also running /auton or /eloop, babysit must not stack — exit cleanly and let those drive the system-level state

Output format (snapshot)

Session         State           PR      Uncommitted  Last activity
ao-6312         WORKING         #661    no           ✻ Cascading… (3m 12s)
ao-6309         TUI-BLOCKED     #?      no           (trust prompt)
ao-6305         STALLED-CMP     #657    yes          Baked for 42m
ao-6302         DEAD            —       —            (no output 8m)

Examples

Watch the worker I just spawned

> /babysit watch ao-6312
Watching ao-6312 (PR #661, branch fix/bd-rgk0-skeptic-cron-trigger-age-filter)
Polling every 60s. Will push-notify on stalled/dead/TUI-block. Max run 90 min.
[17:42:01] WORKING — ✻ Germinating… (0m 12s)
[17:43:01] WORKING — ✻ Germinating… (1m 14s)
[17:44:01] WORKING — ✻ Running tools… (2m 03s)
[17:45:30] TUI-BLOCKED — "Do you trust..." → sent Enter
[17:45:35] WORKING — ✻ Reading… (0m 04s)
...

Snapshot of all workers

> /babysit snapshot
Session         State           PR      Uncommitted  Last activity
ao-6312         WORKING         #661    no           ✻ Germinating… (0m 30s)
ao-6309         IDLE            —       no           (no activity 4m)
ao-6305         STALLED-CMP     #657    yes          Baked for 42m

Watch by PR

> /babysit pr 661
Resolved 661 → ao-6312 (worktree $HOME/.worktrees/agent-orchestrator/ao-6312, branch fix/bd-rgk0-...)
Watching ao-6312. Same as /babysit watch ao-6312.

DRIVER mode — when babysit must send specific fix instructions (bd-snx3)

By default, babysit observes and reports: it posts status updates but does not steer workers. In DRIVER mode, babysit takes the next step when it detects a stuck-on-failure pattern: it extracts the specific failure and sends an ao send with an exact fix instruction.

Trigger rule (mandatory): if the same CI gate failure (same check name, same error class) appears in ≥2 consecutive polls for the same worker, babysit MUST switch to DRIVER mode for that worker.

What to extract (the minimum to act on):

• File path and line number from the failure log (e.g., packages/cli/src/doctor.ts:142)
• The specific wrong value or behavior (e.g., dist/index.js argv shape not recognized in non-canonical check)
• The exact change to make (e.g., change regex to accept '/path/dist/index.js' as canonical binary)

What to send (use the SendMessage / ao send channel, NOT just a push notification):

ao send <session-id> "DRIVER (babysit): <check-name> failing 2+ ticks.
Failure: <one-line description of the error>
Fix: change <file>:<line> — <specific patch in plain English>
Verify: <command to run before pushing> (e.g., pnpm -C packages/cli test)"

Idempotency: one DRIVER send per failure-class per 30 minutes (sentinel ~/.cache/babysit/${s}.last_driver_${checkname}). After sending, babysit reverts to observer mode for the same check name until the failure either changes class or resolves.

Do NOT in DRIVER mode:

• Do not send a generic "keep working" or "fix CI" message — that is the failure pattern. If you cannot extract a specific file:line, push-notify the user instead of sending a vague driver message.
• Do not send ao send with raw gh run output pasted in. Distill to one specific actionable instruction.
• Do not auto-fix the worker's code (babysit does not have write access; it only steers).
• Do not stack DRIVER sends with /auton or /eloop — those are system-level drivers; let them run or stop babysit.

Why this exists: babysit's success metric was "status posted" not "failure fixed." Generic nudges do not move workers that have already tried and failed — they need exact file:line fix instructions. Observed in PR #7618 (rate-limit) over 4+ hours with 15+ babysit status updates and zero progress. Memory: [[babysit-not-a-driver]]. See also [[pr-driver-loop-contract]] in ~/.claude/CLAUDE.md.

Anti-patterns

• Do not run /babysit and /auton simultaneously — they overlap and produce duplicate push-notifications
• Do not auto-respawn dead workers — the spawn parameters (PR, branch, claim, model override) are not recoverable from a dead tmux pane; user must re-spawn explicitly
• Do not send Enter on a ❯ prompt without verifying a question is being asked — Enter on an empty prompt submits a blank, which is harmless but noise
• Do not babysit more than 8 workers at once — the polling loop is bash, not parallel, and the user attention budget caps out fast
• Do not extend --max-min beyond 180 without explicit user approval — long watches consume push-notification quota and can mask real alerts
• Do not send a generic ao send "fix CI" message — that is the exact failure mode DRIVER mode was created to prevent. If you cannot extract a specific file:line + change, push-notify the user instead.

Known failure modes

Failure	Detection	Recovery
tmux server not running	tmux has-session returns 1	Push-notify: "tmux server down — restart with tmux start-server"
ao-* sessions exist but capture-pane returns empty	last == ""	Mark DEAD, push-notify
Sentinel dir not writable	mkdir -p fails	Print to stderr, continue without idempotency (degraded)
ao list not in PATH	which ao returns empty	Print to stderr, use tmux-only mode (no PR resolution)
Push-notification tool unavailable	ImportError	Fall back to printing to stdout + writing a sentinel flag file ~/.cache/babysit/${s}.needs_human

Why not just use Monitor tool directly?

Monitor watches a long-running script and emits a notification per stdout line — perfect for tailing logs. babysit is stateful: it diffs state across polls, applies idempotency via sentinel files, and remediates only on transitions. A Monitor invocation of tmux capture-pane would either flood notifications (every 60s) or miss transitions (if filtered too tightly). The stateful watch loop is the right primitive.

Related skills

• /ao-session-monitor — single-pane one-shot detection (babysit embeds its one-liner)
• /babysit-openclaw — Slack-thread-based, single-shot, different model
• /auton — system-level autonomy diagnostic
• /ao-lifecycle-triage — log-driven deep triage of a single stuck worker
• /evolve-loop / /eloop — autonomous loop; babysit is intentionally NOT autonomous (always opt-in)