메뉴
flightwake 冷啟動 — 接手一個 repo 前先恢復狀態。Use when starting work in a repo that has .flightwake/, when the user says 接手/繼續上次/coldstart, or at the start of any session touching a flightwake-managed repo.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
SOC 직업 분류 기준
flightwake 登記坑 — 把非顯而易見的陷阱寫進 TRAPS registry。Use immediately when a surprising root cause is found (weird error, vendor quirk, encoding trap), or when the user says 記一下這個坑/trap.
flightwake trap registration — write a non-obvious trap into the TRAPS registry. Use immediately when a surprising root cause is found (weird error, vendor quirk, encoding trap), or when the user says log this trap / trap.
flightwake cold start — restore state before touching a repo. Use when starting work in a repo that has .flightwake/, when the user says take over / continue / coldstart, or at the start of any session touching a flightwake-managed repo.
flightwake cross-session handoff — write CONTEXT for work that is unfinished and will continue later. Use when stopping mid-build on multi-session work, when the user says handoff / continue next time, or before context runs out on a large task.
flightwake wrap-up record — write the flight record and update STATE. Use when wrapping up work that touched schema/prod, spanned 3+ commits, or when the session is ending; also when the user says wrap up / record this.
flightwake 收尾記錄 — 寫飛行紀錄並更新 STATE。Use when wrapping up work that touched schema/prod, spanned 3+ commits, or when the session is ending; also when the user says 收尾/記錄一下/record.
| name | fw-coldstart |
| description | flightwake 冷啟動 — 接手一個 repo 前先恢復狀態。Use when starting work in a repo that has .flightwake/, when the user says 接手/繼續上次/coldstart, or at the start of any session touching a flightwake-managed repo. |
目的:在動任何檔案之前,用最少的讀取恢復到「安全接手」狀態。計時——冷啟動成本是框架的品質指標。
.flightwake/STATE.md(現在在哪、進行中、下一步入口、常備事實)latest_record(上次收尾的完整脈絡)DECISIONS.md(要改既有方向前必讀)、TRAPS.md(碰到怪症狀時查)
— 兩者都跳過標 superseded 的條目(它們只是歷史,新舊衝突時以 active/新日期為準)git rev-list --count "$(git log -1 --format=%H -- .flightwake/STATE.md)"..HEAD
(≥1 = 上個 session 沒收尾,提高警覺;STATE 從未 commit 時改看 git log --oneline -10)~/.claude/projects/<專案>/*.jsonl 每條訊息帶 usage;hook stdin 也帶 transcript_path),拿不到再向使用者要 /cost)