unikit

name	unikit
description	Initialize the UniKit framework in a project. Scans the current project to detect the engine and real tech stack, then generates the base framework documents that give AI agents context about the project — the resolved project description, the architecture doc, AGENTS.md, and the user-editable .unikit/config.yaml. This is the one-time, whole-project setup run before any other unikit skill. Use whenever the user wants to initialize, set up, or onboard the framework, e.g. "initialize unikit", "init the framework", "set up unikit", "set up the project", "configure AI context", "scan my project and set it up", "bootstrap the project". This handles the initial full bootstrap — to edit one document later, use that document's dedicated skill.
argument-hint	[project description] (optional)
allowed-tools	["Read","Write","Edit","Glob","Grep","Bash(mkdir *)","Bash(ls *)","Bash(find *)","Bash(git *)","Skill","Agent","AskUserQuestion"]

UniKit Setup — Game Project Context Initialization

Set up AI agent context for a game project by:

1. Scanning the real tech stack from engine-specific sources
2. Bootstrapping .unikit/config.yaml (user-editable source of truth for language, git, and workflow)
3. Generating .unikit/DESCRIPTION.md — project specification
4. Generating AGENTS.md — structural map for AI agents
5. Bootstrapping the knowledge base under .unikit/memory/ via the rules registry — the code module (core/ + stack/) always, plus the gamedesign design library when its skills are installed
6. Delegating architecture generation to /unikit-architecture
7. Printing the setup summary as the final, user-facing confirmation that all artifacts are in place

The architecture sub-skill is invoked before the summary so the summary can honestly list .unikit/ARCHITECTURE.md alongside the other artifacts. When /unikit-architecture returns, do not end the turn — immediately print the Step 11 summary in the same response.

This skill is the entry point for the unikit ecosystem. It creates the foundational context that other unikit skills (unikit-devcontext, unikit-plan, unikit-implement, etc.) rely on for informed decision-making, including the canonical .unikit/config.yaml they all read at the start of every command.

---

Subagent Delegation — BLOCKING PRE-REQUISITE

When the workflow reaches a step that requires a subagent (Agent), the assistant MUST automatically spawn the subagent if agent execution is supported by the current environment and not prohibited by higher-priority instructions.

Only if agent execution is unavailable or blocked, the assistant MUST ask the user before proceeding with any alternative.

---

Execution Contract

This skill must be executed as a strict workflow, not as guidance.

1. Steps are numbered 0-11; execute in order. Do not skip, merge, reorder, or compress steps unless the step explicitly says it may be skipped.
2. Do not infer user answers from context when the workflow requires an AskUserQuestion step.
3. Do not substitute a recommendation, summary, or "seems fine" confirmation for a required question. A generic approval ("yes", "ok", "go ahead") only answers the immediately pending question — it does not retroactively authorize skipped selections or unanswered follow-ups.
4. Do not create, edit, or install anything outside .unikit/config.yaml and .unikit/system/LANGUAGE_RULES.md before Step 4 is complete. After Step 4, every write must satisfy its own step's prerequisites (e.g., Step 9 rule installs require the missing-rules list from Step 9.3 and user confirmation from Step 9.4).
5. If the environment prevents a required step (tool unavailable, file missing, subagent unreachable), stop and print BLOCKED at Step N: <reason>. Do not silently substitute an approximation.

---

Workflow

Fixed order — always. Regardless of whether /unikit is invoked with or without arguments, the first three user-facing decisions are always language → git → write config. Only after .unikit/config.yaml exists on disk do we ask the user for a project description, load engine rules, scan, or do anything else. This guarantees that every subsequent prompt and artifact respects the user's language choice.

Step 0: Load Existing Config (if any)

Check whether .unikit/config.yaml already exists. This step is a pure file read — no user interaction, no arguments parsing.

• If it exists — Read it. Treat its values as the source of truth for language.*, git.*, workflow.*. Mark Steps 1 / 2 / 3 as "merge mode": prefer existing values, prompt only when a critical field is missing or empty.
• If it does not exist — set "bootstrap mode": Steps 1 / 2 / 3 will collect values from the user / git and write a fresh config.yaml.

All unikit artifacts live under fixed default paths (.unikit/DESCRIPTION.md, .unikit/ARCHITECTURE.md, .unikit/RULES.md, .unikit/memory/, .unikit/code/plans/, etc.) — see {{skills_dir}}/{{self_name}}/references/config-template.yaml for the canonical language / workflow / git schema.

---

Step 1: Language Resolution

Determine the language used for AI-agent communication and generated artifacts. This runs before $ARGUMENTS is parsed and before the project description prompt, so that every subsequent question in this run is asked in the user's chosen language.

Bootstrap mode (no existing config.yaml):

AskUserQuestion: What language should I use for communication and artifacts?

Options:

1. English (en) — Default
2. Russian (ru)
3. Chinese (zh)
4. Other — specify manually (2-letter ISO code)

Map the answer to an ISO code (en, ru, zh, or user-supplied).

If the user selected English, set both language.ui = en and language.artifacts = en and skip the follow-up question.

If the user selected a non-English language (<lang>), ask the follow-up:

AskUserQuestion: What should be translated?

Options:

1. Communication only — AI responds in selected language, artifacts in English
2. Communication and artifacts — Both AI responses and generated files in selected language
3. Artifacts only — AI responds in English, generates files in selected language

Map the follow-up answer to language.ui / language.artifacts:

• Communication only → ui = <lang>, artifacts = en
• Communication and artifacts → ui = <lang>, artifacts = <lang>
• Artifacts only → ui = en, artifacts = <lang>

Always set language.technical_terms = keep (no prompt — edit .unikit/config.yaml later to change).

Merge mode (existing config.yaml): keep the loaded language.* values, do not re-prompt.

---

Step 2: Git Detection

Detect git presence and base branch for the project. This runs immediately after language resolution and before any description prompt.

git rev-parse --is-inside-work-tree 2>/dev/null && echo "git" || echo "no-git"

• git → set git.enabled = true. Detect the default branch in this order:

  1. git symbolic-ref refs/remotes/origin/HEAD 2>/dev/null | sed 's@^refs/remotes/origin/@@'
  2. git remote show origin 2>/dev/null | grep "HEAD branch" | awk '{print $NF}'
  3. Fallback: main — if both commands return empty or fail (e.g. no remote, offline, detached state), unconditionally use main. Never leave git.base_branch empty when git.enabled = true.

  After detection, confirm with the user only when the detected branch is unusual (not one of main, master, develop, trunk). For usual branches and for the main fallback, accept silently without asking.

  AskUserQuestion (only for unusual branches): Detected base branch <branch>. Use it for diff/review/merge targets? Options: 1. Yes, 2. Use a different branch (free text).

• no-git → set git.enabled = false. Skip the base-branch prompt; leave git.base_branch empty in the generated config.

Merge mode: if config.yaml already declared git.enabled / git.base_branch, keep those values and skip detection.

Other git keys (create_branches, branch_prefix, skip_push_after_commit) take their template defaults unless the user explicitly overrides them later by editing config.yaml.

---

Step 3: Write .unikit/config.yaml

Materialize the collected values into .unikit/config.yaml.

Bootstrap mode (no existing file):

1. mkdir -p .unikit

2. Read {{skills_dir}}/{{self_name}}/references/config-template.yaml.

3. Substitute the runtime placeholders:

   • {{LANGUAGE_UI}} → the ISO code from Step 1 (e.g. ru)
   • {{LANGUAGE_ARTIFACTS}} → same (or split value if user chose)
   • {{GIT_ENABLED}} → true or false from Step 2
   • {{GIT_BASE_BRANCH}} → the detected/confirmed branch (or empty for no-git)

4. Write the substituted content to .unikit/config.yaml.

5. Inform the user:

   Created .unikit/config.yaml. Edit it any time to customize artifact paths, language, git, or workflow settings. All unikit skills will read your changes on the next run.

Merge mode (file already exists):

• Do not overwrite. Inform the user:

  Reusing existing .unikit/config.yaml (found language.ui = <value>, git.enabled = <value>).

• If the file is missing one of the recently-added keys (e.g. workflow.research_relevance_days, git.branch_prefix, git.skip_push_after_commit), tell the user which keys are missing and offer to append them with their template defaults (do not touch the rest of the file). Use Edit for the targeted append, never a full rewrite.

After Step 3, treat .unikit/config.yaml as the source of truth for all subsequent language / git references in this run.

---

Step 3.1: Write .unikit/system/LANGUAGE_RULES.md

Install the centralized language rules file that all skills and subagents reference.

Both bootstrap and merge mode:

1. mkdir -p .unikit/system
2. Read {{skills_dir}}/{{self_name}}/references/LANGUAGE_RULES_TEMPLATE.md.
3. Write its content as-is to .unikit/system/LANGUAGE_RULES.md.

The file instructs skills to read .unikit/config.yaml at runtime for language values. No placeholder substitution is needed — the template is static.

---

Step 4: Parse Arguments / Project Description

Only now — after language, git, and .unikit/config.yaml are settled — look at $ARGUMENTS and collect the project description. All output from this point forward is in the language chosen in Step 1.

Check $ARGUMENTS:
├── Has description? → save as project description, proceed to Step 5
└── No arguments? → ask user ↓

If no arguments:

AskUserQuestion: What kind of game are you building? Briefly describe the genre and core idea. (e.g., "2D mobile tycoon game where you run a pawnshop", "3D first-person horror", "top-down RPG with crafting")

Save the user's answer as project description, then proceed to Step 5.

---

Step 5: Load Engine Rules

This skill requires {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md to exist. It contains all engine-specific scan rules, paths, detection tables, and stack selection options. The UniKit installer creates this file when the user selects their game engine.

If {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md does not exist, stop and inform the user:

"Engine rules not found. Run the UniKit installer first to select your game engine."

Read {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md once and use it throughout all subsequent steps.

---

Step 6: Project Scan

Check for engine project indicators listed in the "Engine Detection" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md.

If engine project exists — scan it. The goal is to document what the project actually uses. Track every detected technology — these answers will be used to skip corresponding questions in Stack Selection.

If no engine project — skip to Step 7: Interactive Stack Selection.

2.1 Project Settings

Read the project settings file specified in the "Project Settings" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md. Extract the fields listed there: engine version, target platform, renderer, project name.

2.2 Package Dependencies

Read the package manifest specified in the "Package Dependencies" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md.

Categorize packages according to the rules there:

• Default/core packages — skip (use the filter pattern from ENGINE_RULES.md)
• Feature packages — note as part of the stack
• Third-party packages — key dependencies, note them

Check the lock file if one is specified.

2.3 Plugins

Scan the plugin directory from the "Plugin Directories" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md. Use the detection table to identify known plugins by their folder indicators.

2.4 Third-Party Assets

Scan the third-party assets directory from the "Third-Party Assets" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md. Use the detection table to identify known assets. Skip if the section says to skip.

2.5 Custom Modules

Scan the modules directory from the "Custom Modules" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md. Skip if no modules directory convention is defined or if the directory does not exist.

2.6 Project Scripts

Check the common script locations listed in the "Script Conventions" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md. Determine the organizational pattern (by feature, by layer, by type).

2.7 Module Definitions

Find module definition files using the glob pattern from the "Module Definitions" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md. These reveal the dependency graph and module boundaries.

2.8 Scenes

Find scene files using the glob pattern from the "Scene Files" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md. Note the bootstrap/entry scene, main gameplay scene, and any additional scenes.

After scanning, present the analysis to the user:

## Project Analysis

**Engine:** [use output format from ENGINE_RULES.md "Project Settings" section]
**Platform:** [target platform]

### Detected Stack

**[Section name from ENGINE_RULES.md "Package Dependencies"]:**
- [significant packages, excluding defaults per filter]

**Plugins ([path from ENGINE_RULES.md]):**
- [each plugin with purpose]

**Third-Party Assets:**
- [each asset with purpose]

**Custom Modules:**
- [each module with purpose]

**Scripts Directory:** [detected path]
**Module Definitions:** [count] files
**Scenes:** [list key scenes]

Then proceed to Stack Selection — the scan results pre-fill answers, so already-detected categories will be skipped.

---

Step 7: Interactive Stack Selection

Ask each category as a separate AskUserQuestion. Skip any question where the answer was already determined by the Project Scan (e.g., if a DI framework was found during plugin scan, skip the DI Framework question). For skipped questions, note the detected value in the analysis output.

Read the "Stack Selection Options" section of {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md — it contains the available options for each category with engine-specific descriptions and notes.

Based on the project description and scan results, recommend a tech stack. Show recommendations with reasoning tailored to the project type. Explain why each recommendation fits.

Present ALL options from ENGINE_RULES.md for each category in order. Never truncate or summarize option lists — show every row from the table exactly as written, so the user sees the complete set of choices:

1. Architecture — present options from the "Architecture" table.

Based on choice:

• If ECS selected → note ECS as project architecture, then ask ECS Framework follow-up (from "ECS Frameworks" table). Based on ECS choice → add chosen framework to stack. Check "Notes" column — some ECS frameworks include networking (skip Networking question if noted).
• If a non-default architecture selected (not OOP) → add to stack
• Note the chosen architecture as project architecture regardless

2. Networking — present the appropriate "Networking" table based on the architecture chosen in step 1 (ECS vs non-ECS have different option sets).

• Skip entirely if Photon Quantum was selected as ECS framework in step 1 — it already includes networking

Based on choice:

• None → skip networking setup
• Any framework → add to stack

3. DI Framework — present options from the "DI Frameworks" table.

Based on choice:

• None → skip DI setup
• Any framework → add to stack, note specific patterns (e.g., installer patterns for Zenject)

4. Async Pattern — present options from the "Async Patterns" table.

Based on choice:

• Built-in/legacy patterns → note as primary async pattern, do not add to stack
• Third-party framework → add to stack, set as primary async pattern

5. UI Architecture:

AskUserQuestion: UI Architecture?

Options:

1. MVVM (recommended for data-driven UI with reactive bindings)
2. MVP family (MVP / MVP Passive View / MVP Presentation Model)
3. Other (specify in text)

Based on choice:

• MVVM → note MVVM as UI architecture pattern
• MVP family → note MVP as UI architecture pattern, ask user to clarify variant if needed
• Other → add user-specified UI architecture to stack

6. UI Framework — present options from the "UI Framework" table.

Based on choice:

• Built-in/default framework → note as UI framework, do not add to stack
• Third-party or advanced framework → add to stack

7. Additional engine-specific sections — scan {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md for a block delimited by <!-- unikit-additional-sections --> and <!-- /unikit-additional-sections --> HTML comments. If the opening tag is absent — or the block between the tags has no subsections — skip this step silently and move to step 9. Otherwise, for every subsection (### …) inside that block that contains a markdown table with a | # | Option | Description | header, ask the subsection as a separate AskUserQuestion in the order it appears in the file. Subsections without such a table are skipped silently.

• Default rendering (single-select): one numbered option per table row. User picks exactly one.
• Multi-select rendering: if the subsection body starts with **Presentation:** numbered-multi-select, present two-step interaction. Step 1 — single AskUserQuestion with three options: All (select every row), Select some (pick specific numbers), Skip (select none). Step 2 — only if the user chose Select some: a second AskUserQuestion asking for the list of row numbers; the user types the list (e.g. 2, 5, 9) through the tool's built-in "Other" free-text slot. Parse comma-separated integers, look up each corresponding row's Option column, and treat every resolved option as a selected value.
• Every selected option (single- or multi-select) is added to the required set directly with its label as-is; Package Display Names is consulted only for short aliases of UPM-package rows from the Step 6 scan.

8. Additional frameworks and plugins?

AskUserQuestion: Any additional frameworks, plugins, or libraries you plan to use? (e.g., inventory system, dialogue, AI trees, animation, networking — show examples from ENGINE_RULES.md "Additional Frameworks Examples")

Options:

1. Skip — proceed without adding anything
2. Specify (free text — list everything you want to add)

Based on choice:

• Skip → proceed
• Specify → add each user-listed framework/plugin to stack

---

How to determine what is a "stack technology":

Every Step 7 selection whose prose marks it with add to stack, every free-text item from Q8/Q9 (and Q1–Q7 Other when the surrounding prose marks the choice with add to stack), and every scan-detected plugin / non-default package / third-party asset from Step 6 becomes a required rule. Sentinel labels that the engine's ENGINE_RULES.md prose marks as do not add to stack (typical examples: None, OOP, Built-in, Awaitable, Coroutines, ManualDI, IMGUI, uGUI, Pure DI, Signals + await, Built-in Control, None — Autoloads) are excluded — the prose is the source of truth, the list above is illustrative.

The Package Display Names table in ENGINE_RULES.md is not a gate — it only maps UPM package ids to short display names (e.g. com.unity.render-pipelines.universal → URP). Packages absent from that table keep their id verbatim in required.

---

Step 8: Generate Context

After Stack Selection is complete:

1. Generate .unikit/DESCRIPTION.md from description + scan results + confirmed stack — see DESCRIPTION.md Template. The Engine field always includes the render pipeline extracted by the Step 6 Project Settings scan from the file listed in the engine's ENGINE_RULES.md "Project Settings" section. Use the Output format string declared in that same section verbatim. This is a scan-only field — the /unikit skill never asks the user about the renderer.
2. Generate AGENTS.md in project root — see AGENTS.md Template.

Architecture generation (.unikit/ARCHITECTURE.md via /unikit-architecture) is intentionally not done here — it is the very last step of this workflow (see Step 11). Do not invoke it from Step 8.

---

Step 9: Bootstrap Memory Rules

Prepare the rules knowledge base in a few passes. Core rules are installed silently from the registry. Then — working from the authoritative installed state — the skill builds a list of truly missing stack rules, confirms with the user what should be created without revealing the mechanism, queries the registry to see which of those rules are available as vetted content, and only then asks how to create them (install from registry, generate locally, or decide per framework). A final sync pass reconciles state with disk.

9.1: Ensure directory structure

Create directories and index file if they don't exist:

• Memory root → .unikit/memory/
• Core memory subdir → .unikit/memory/code/core/
• Stack memory subdir → .unikit/memory/code/stack/
• Rules index file → .unikit/memory/code/RULES_INDEX.md

mkdir -p .unikit/memory/code/core .unikit/memory/code/stack

Check whether .unikit/memory/code/RULES_INDEX.md exists. If not, create it from this template:

# Rules Index

Knowledge base rules for the project. Located in `.unikit/memory/`.

## Override Priority (highest wins)

1. **`.unikit/RULES.md`** — project-specific overrides (always wins)
2. **`.unikit/ARCHITECTURE.md`** — project architecture decisions
3. **`.unikit/memory/code/core/*.md`** — universal best practices
4. **`.unikit/memory/code/stack/*.md`** — framework-specific knowledge

When a project rule in `RULES.md` conflicts with a template rule in `rules/`, the project rule wins.

---

Read this index to determine which rule files are relevant for the current task, then load only the needed files.

## Core — universal game development knowledge (`.unikit/memory/code/core/`)

| File | Description | Load When |
|------|-------------|-----------|

## Stack — framework-specific knowledge (`.unikit/memory/code/stack/`)

| File | Description | Load When |
|------|-------------|-----------|

9.2: Core bootstrap

Install the baseline rule set via the registry chain (primary → official → bundled). This is a quiet, idempotent step — on a re-run it will either skip everything (hash match) or pull fresh content when the registry has been updated. rules install defaults owns the bootstrap contract: it walks every module whose skills are installed, by each module's bootstrap policy — the code module installs the always-tagged (core) rules, the gamedesign module installs its entire catalog (core + library) when its skills are present; modules absent from the registry are skipped gracefully. Each module's manifest is fetched once, and RULES_INDEX.md is regenerated on every invocation. (Bare rules install with no arguments prints help instead — the bootstrap lives behind the explicit defaults keyword.)

unikit-ai rules install defaults

Only surface the output if the command fails (non-zero exit). On success it is safe to continue without displaying the aggregated report (the summary line Rules: N installed, M already-installed, K failed is emitted but not required in the skill's own output).

9.3: Build the authoritative missing-rules list

The goal of this step is to produce a list of stack technologies that need a rule created and do not already have one. This list must not contain anything already installed — otherwise Step 9.7 will call rules install on ids that are already present and waste registry round-trips. With the variadic rules install handler those ids are still absorbed into the aggregated report (↻ already installed) instead of emitting exit 4, but building an accurate missing set keeps the install report clean and the flow predictable.

Skill-side canonical form. Define this helper once and use it at every skill↔CLI boundary:

toCanonicalRuleId(name) = name.trim().toLowerCase().replace(/[\s_]+/g, '-')

This is strictly a transform applied at the call-site (set-difference comparisons in 9.3, registry cross-reference in 9.5, args for rules install in 9.7). The required / targets / missing arrays themselves never mutate — they stay in display form. The CLI's internal normalizeRuleId only does trim + toLowerCase, so the space→hyphen pass is the skill's responsibility whenever display names contain spaces (e.g. "Input Manager" → "input-manager").

Three-layer principle — display raw, compare canonical, store canonical:

• UI layer — Step 9.3 presenting, Step 9.4 AskUserQuestion, Step 9.5 Technology column: names stay in display-raw form (a multi-word framework like "Input Manager", a plugin folder like "Databrain", an aliased package id like "URP").
• Comparison layer — Step 9.3 set-difference, Step 9.5 registry cross-reference, Step 9.7 rules install argv: apply toCanonicalRuleId to both sides. Arrays are never mutated in place.
• Storage layer — .unikit/memory/code/stack/*.md filenames and .unikit.json entry.name are always canonical lowercase-hyphen. The writers (rules install CLI and the /unikit-memory subagent) enforce that filename form themselves — this skill does not need to rename anything on disk.

Build the "already installed" set from two authoritative sources (not from RULES_INDEX.md — that file is derived and can lag behind reality between runs):

1. .unikit.json state — the real state tracked by the CLI. Read it via:

   unikit-ai rules status --json
   

   Parse the JSON output and collect every entry where category === "stack". Every name in that list is considered installed regardless of source (registry / local) — both sources mean a file on disk that we must leave alone.

2. Disk scan — list .unikit/memory/code/stack/*.md (excluding RULES_INDEX.md). Treat every <name>.md filename as also installed. This catches rules that exist on disk but have not yet been reconciled into state (e.g. a rule generated in a parallel skill run that never triggered rules sync).

Union both sets into already_installed.

Next, build the required set as the union of three disjoint sources:

required = detected_from_scan ∪ picked_from_qs ∪ free_text

where:

• detected_from_scan — identified framework names derived from the Step 6 scan, not raw folder / package strings. For each scan entry, identify what framework it represents, then emit that name:

  • Package manifest entries — from "Package Dependencies" in ENGINE_RULES.md, minus the engine's Default package filter. For well-known package ids, the Package Display Names table supplies an alias (e.g. com.unity.render-pipelines.universal → URP). For ids outside the table, use general ecosystem knowledge to identify the framework name when obvious; otherwise keep the raw package id.
  • Plugin folders — from Assets/Plugins/*/ or the engine equivalent. The Plugin Directories detection table provides folder → framework hints for common cases (Sirenix/ → Odin Inspector, Aspid/ → ASPID MVVM, Demigiant/ → DOTween). The table is non-exhaustive — the ecosystem has hundreds of plugins and no table can enumerate them all. For folders outside the table, use general ecosystem knowledge to infer the framework when the folder clearly matches a known third-party library; otherwise keep the folder name verbatim.
  • Third-Party Assets folders — same identification logic as Plugin folders.
  • Assets/Modules/*/ is not included — project code, not a framework.

  Entries hold framework names, not raw strings. When identification is not confident, fall back to the raw folder / package name — surfacing an unknown name to the user is safer than guessing wrong. The Plugin Directories and Package Display Names tables are hints, not gates. No slugify, no lowercase — display form is preserved.

• picked_from_qs — every Step 7 option the user selected whose prose in the current engine's ENGINE_RULES.md marks the choice with add to stack. Options whose prose says do not add to stack, note as …, do not add to stack, or skip … are excluded. The source of truth is the Step 7 prose together with the actual engine's ENGINE_RULES.md — the sentinel set is engine-specific and is not hard-coded in this skill. Consult the current engine's prose every run.

  Q1–Q7 Other free-text. When the user picks Other in any of Q1–Q7 (Architecture, Networking, DI, Async, UI Framework, engine-specific subsections) and the step prose marks the choice with add to stack, the free-text content goes into required in display-raw form — symmetric to Q8/Q9 handling. No normalization, no slugify at this stage.

  Note: picked_from_qs is not consulted against the Package Display Names table — that table is display-alias-only for UPM packages from detected_from_scan.

• free_text — Q8 Other inputs from engine-specific subsections and Q9 Additional frameworks free-text. Q1–Q7 Other is already covered by picked_from_qs and is not duplicated here.

required entries stay in display-raw form throughout; canonicalization happens only at comparison / CLI-boundary sites.

Before computing missing, query the registry catalog so the same result feeds both the set-difference here and the informational table in Step 9.5. Always pass --module code — a bare rules list now defaults to all modules (flat-all), and this orchestrator only wants the code catalog. rules list --module code --json returns the flat-single shape { engine, module, rules: [{ id, category, description, version }] } — filter to category === "stack":

unikit-ai rules list --module code --json

For each entry in required, semantically match it against that stack pool. See Step 9.5 for the matching criteria — the key point is that id-similarity, description match, and common aliases all count; strict canonical equality is the strongest signal but not the only one (Odin Inspector → registry odin, ASPID MVVM → registry aspid-mvvm, and so on). Record { display, resolved_id, resolved_version } per entry; resolved_id is the registry id when match confidence is high, otherwise null.

Then compute the set-difference against already_installed. An entry counts as installed if either its resolved registry id or its canonicalized display name matches an on-disk rule — this keeps aliased installs (e.g. odin on disk for a scan entry Odin Inspector) out of the missing list on re-runs:

already_installed_canonical = {
  toCanonicalRuleId(name) for name in
    (rules_status_json.entries where category == "stack")
    ∪ disk_scan(.unikit/memory/code/stack/*.md)
}

def canonical_for(r):
    # Prefer the semantically-resolved registry id. Otherwise fall back to the
    # display-name canonicalization.
    return r.resolved_id or toCanonicalRuleId(r.display)

missing = [
    r for r in resolved_required
    if canonical_for(r) not in already_installed_canonical
]
# `missing` entries keep the display-raw form for Step 9.4; their resolved
# ids (when present) flow forward to Step 9.5 and Step 9.7.

If missing is empty — skip straight to Step 9.9 (final sync). Do not ask the user anything: there is nothing to create.

9.4: Confirm which missing rules to create

Present the missing list in plain language. Do not mention "registry", "agents", "install", or "generate" in this question — the user does not yet need to know how the rules will be produced. At this point we only want to confirm what to create.

Before presenting the question, partition missing into three blocks and number items continuously across all blocks. Skip any empty block in the output:

• (a) Frameworks — detected_from_scan items that were identified as a specific framework (via the Plugin Directories / Package Display Names hints or general ecosystem knowledge). Display the resolved framework name, not the raw folder or package id.
• (b) Detected dependencies — detected_from_scan items that remained as raw folder / package identifiers because no confident framework identification was possible.
• (c) Specified manually — picked_from_qs and free_text entries (Step 7 choices marked add to stack, Q1–Q7 Other free-text, Q8/Q9 free-text).

AskUserQuestion: The following stack rules are missing and should be created. Proceed?

Frameworks:

1. Odin Inspector
2. ASPID MVVM
3. UniTask
4. DOTween

Detected dependencies: 5. Databrain 6. com.example.customlib 7. Sonity

Specified manually: 8. MyCustomPlugin

Options:

1. All — create rules for every item on the list
2. Select — pick specific items from the list (comma-separated numbers across all groups)
3. Skip — do nothing, proceed without touching stack rules

(The block above is an illustrative example — only groups that actually have entries are shown at runtime; numbering is continuous across the ones that remain.)

Based on choice, build the targets list:

• Skip → targets = ∅, jump to Step 9.9.
• Select → parse the comma-separated numbers as one continuous range across whichever blocks were rendered; targets = the chosen subset (display-raw labels preserved).
• All → targets = the full missing list.

9.5: Registry lookup — semantic matching

targets carries the resolved registry metadata from Step 9.3 (skill already ran rules list --module code --json and kept resolved_id / resolved_version per entry during the missing computation). Reuse that cached result — do not re-query rules list.

Semantic matching — NOT strict id equality. The matching procedure Step 9.3 applied is documented here because this step surfaces the result to the user. For each target, search the stack pool for the registry rule that represents the same framework. Three signals — any one at high confidence is enough, but combining them strengthens the verdict:

• Id similarity — the registry id contains the target's canonical form, is contained by it, or is a known short alias. Examples: target ASPID MVVM (canonical aspid-mvvm) → registry aspid-mvvm (exact); target Odin Inspector (canonical odin-inspector) → registry odin (short alias, not odin-inspector); target UniTask → registry unitask.
• Description match — the registry rule's description field names the target framework. Example: registry id odin with description "Odin Inspector attribute patterns, validation, editor tools" matches target Odin Inspector because the description explicitly names it.
• Common naming conventions — short aliases widely used in the ecosystem (urp ≡ Universal Render Pipeline, dotween ≡ DOTween / Demigiant, r3 ≡ R3 reactive streams, nodecanvas ≡ NodeCanvas).

Do not require toCanonicalRuleId(target) === registry.id. That single-criterion check misses every aliased rule and is exactly what this flow is designed to avoid. toCanonicalRuleId remains the strongest single signal when it hits, but when it misses, continue through id-similarity, description-match, and ecosystem conventions before giving up. When in doubt (weak similarity, ambiguous candidates), prefer unmatched — generating a fresh rule via /unikit-memory is safer than installing the wrong one.

Partition targets into two bags using the cached resolved_id:

• matched — targets with resolved_id != null. Use { id: resolved_id, version: resolved_version } for the Step 9.7 install call; the display-raw target label stays in the UI.
• unmatched — targets with resolved_id == null. These flow to Step 9.8 for generation via /unikit-memory.

Show a short informational table — not a decision point, just context for the next question. The Technology column shows the display-raw target label; the Registry column shows the matched registry id (or ✗ not found):

Technology             Registry              Version
---------------------- --------------------- --------
URP                    ✓ urp                 1.2.0
DOTween                ✓ dotween             2.0.0
Odin Inspector         ✓ odin                1.5.0
ASPID MVVM             ✓ aspid-mvvm          1.1.0
Databrain              ✗ not found           —

9.6: Choose how to create the rules

If matched is empty — skip this question entirely. There is nothing to install from the registry; everything in targets becomes generate_set and proceeds straight to Step 9.8.

Otherwise, ask the user how to produce the rules:

AskUserQuestion: How should I create these rules?

Options:

1. Install matches from registry, generate the rest — use the registry for {matched.length} rule(s) and generate {unmatched.length} locally. Recommended when matched rules look appropriate.
2. Generate everything from scratch — ignore the registry and generate all {targets.length} rules locally. Use when you want project-specific content instead of the vetted registry version.
3. Decide per framework — answer separately for each item

Based on choice:

• Option 1 → registry_set = matched, generate_set = unmatched.
• Option 2 → registry_set = ∅, generate_set = targets (includes matched entries — the user explicitly wants to regenerate them).
• Option 3 → For each item in matched, ask a per-item AskUserQuestion:
  • Prompt: How should I create the rule for {name}?
  • Options: 1. Install from registry (v{version}), 2. Generate locally
  • Route the item into registry_set or generate_set based on the answer.
  • All items in unmatched go straight into generate_set without a per-item prompt (there is nothing to install for them).

9.7: Install registry-backed stack rules

If registry_set is empty, skip this step. Otherwise invoke the CLI once with all ids as variadic arguments — the new handler fetches the manifest a single time and emits an aggregated report:

unikit-ai rules install <id1> <id2> <id3> ...

Parse the aggregated report line-by-line. Each id produces one of three markers:

• ✓ installed <category>/<id> v<version> — fresh install or --force overwrite, count as success.
• ↻ already installed <category>/<id> — absorbed idempotent skip. Log a short note like {id} already installed — skipped and continue. Never retry with --force unless the user explicitly asked for it earlier.
• ✗ failed <category>/<id>: <reason> — per-rule failure, continue to the next id in the report.

The summary line Rules: N installed, M already-installed, K failed is the authoritative tally.

Exit code handling for the variadic call:

• 0 — at least one rule installed or already-installed; K failures are per-rule and have already been surfaced in the report. Continue.
• 1 — every requested id failed (no successes, no already-installed). Show the full output and ask AskUserQuestion: "rules install {ids}" failed for every id — abort Step 9, or continue without stack rules? with options 1. Continue without stack rules, 2. Abort step. Route accordingly.
• 2 — registry chain unreachable (fatal). Show the CLI output and abort the step with the same prompt as above.
• 5 — engine missing from manifest or empty core whitelist (fatal). Show the CLI output and abort.

Do not call the command once per id — the whole point of the variadic shape is to fetch the manifest once per Step 9.7 run.

9.8: Generate the remaining stack rules via agents

Invariant — always via subagent: route every item in generate_set through an Agent call, including when generate_set.length === 1. Never generate a stack rule inline in this skill's own context, even for a single technology. Rule generation is token-heavy (ENGINE_RULES, templates, refs) and must not pollute the /unikit context before Steps 10-11 run.

The generate_set list contains stack technologies that either had no registry match or that the user chose to generate locally. For each, launch an Agent call that generates the rule:

Agent(
  subagent_type: "general-purpose",
  prompt: "/unikit-memory --module code --skip-registry Add stack rules for {technology name}",
  description: "Generate {technology} rules",
  skills: ["unikit-memory"]
)

Two flags are passed, and both are mandatory:

• --module code pins the delegation to the code knowledge-base module. /unikit is deliberately code-pinned, so it must name the target module explicitly rather than relying on unikit-memory's module-inference fallback (which only resolves to code by accident while code is the sole registered module). This keeps the delegation deterministic and self-documenting once additional modules are registered.
• --skip-registry tells /unikit-memory to bypass its own registry-lookup step (9.5 already covered it) and go straight to generation.

Launch up to 10 agents in parallel. If more than 10 technologies remain, batch them: launch 10, wait for completion, launch next batch.

Wait for all launched agents to finish before proceeding to Step 9.9.

Fallback (if the Agent tool is unavailable in the current environment): do NOT execute /unikit-memory yourself inline — that violates the invariant above. Instead, print one invocation per item in generate_set, each on its own line, outside any code fence, prefixed with Run: and using the same --module code --skip-registry form as the Agent prompt above, so the user can copy-paste and run them. The N=1 case takes the same path: one Run: /unikit-memory --module code --skip-registry Add stack rules for {technology name} line. After printing, proceed to Step 9.9 without waiting — the user runs them asynchronously.

9.9: Final reconciliation

Close the loop with a sync pass so that .unikit/memory/code/RULES_INDEX.md, .unikit.json, and the contents of .unikit/memory/ end up in agreement (including rules generated in Step 9.8 which went straight to disk without touching state).

unikit-ai rules sync

On success continue to Completion.

---

DESCRIPTION.md Template

Generate .unikit/DESCRIPTION.md with content adapted to what was actually discovered or confirmed by user.

# Project: [Project Name]

## Overview
[Clear description of the project — what it is, genre, target audience]

## Core Features
- [Feature 1]
- [Feature 2]
- [Feature 3]

## Tech Stack
- **Engine:** [Engine name + version / Language + version / Render pipeline] — last segment is the render pipeline from the Project Settings scan; format is the `Output format` string from the engine's `ENGINE_RULES.md` "Project Settings" section
- **DI:** [framework name / None]
- **Async:** [framework or pattern name]
- **Reactive:** [framework name / None]
- **UI Binding:** [framework name / None]
- **Inspector:** [tool name / default]
- **Animations (UI):** [framework name / None]
- **Asset Loading:** [framework name / built-in / None]
- **[category]:** [technology]

## Architecture Notes
- [Key architectural decisions discovered or planned]
- [Module/folder organization pattern]
- [Notable patterns: DI lifecycle, factory pattern, event bus, etc.]

## Architecture
See `.unikit/ARCHITECTURE.md` for detailed architecture guidelines.

## Non-Functional Requirements
- **Platform:** [target platforms]
- **Performance:** [key performance constraints]
- **Testing:** [test framework and patterns]
- **Documentation:** [documentation conventions]

Rules:

• Every technology listed must be detected by scan or confirmed by user during Stack Selection
• Do not list default engine packages (use the filter from ENGINE_RULES.md)
• Group related technologies logically
• Architecture Notes should capture real patterns, not generic advice

---

AGENTS.md Template

Generate AGENTS.md in the project root as a structural map for AI agents.

Use the "Project Structure Template" and "Key Entry Points" from {{skills_dir}}/{{self_name}}/references/ENGINE_RULES.md as the basis for the structure section, but only include directories and files that actually exist.

# AGENTS.md

> Project map for AI agents. Keep this file up-to-date as the project evolves.

## Project Overview
[1-2 sentences from project description]

## Tech Stack
[Compact table from project description — engine, DI, async, key frameworks]

## Project Structure
[Use Project Structure Template from ENGINE_RULES.md, show only real folders]

## Key Entry Points
[Use Key Entry Points from ENGINE_RULES.md, fill with actual files]

## Scenes
| Scene | Purpose |
|-------|---------|
| [scene name] | [purpose] |

## Module Map
| Module | Path | Purpose |
|--------|------|---------|
| [module] | [path] | [purpose] |

## AI Context Files
| File | Purpose |
|------|---------|
| AGENTS.md | This file — project structure map |
| .unikit/config.yaml | User-editable unikit config (paths, language, git) |
| .unikit/DESCRIPTION.md | Project specification and tech stack |
| .unikit/ARCHITECTURE.md | Architecture decisions and guidelines |
| .unikit/RULES.md | Coding conventions and rules |
| .unikit/memory/code/RULES_INDEX.md | Index of framework-specific rule files |
| .unikit/memory/gamedesign/RULES_INDEX.md | Game-design knowledge index (only if the gamedesign module installed rules) |

Rules:

• Describe only what actually exists — no placeholders
• Directory tree shows real folders, not ideal ones
• Module Map lists real modules with their actual purpose
• Update AI Context Files to only list files that exist

---

Step 10: Delegate Architecture Generation

After Step 9 finishes, generate .unikit/ARCHITECTURE.md by delegating to /unikit-architecture. Step 11 (Print Setup Summary) runs in the same response immediately after /unikit-architecture returns — do not end your turn in between.

Invariant — always via subagent: route /unikit-architecture through an Agent() call. Never invoke it inline in this skill's own context. Architecture generation is token-heavy (ENGINE_RULES, project scan, DESCRIPTION, RULES, RULES_INDEX, existing ARCHITECTURE) and must not pollute the /unikit context before Step 11 runs.

Launch the subagent:

Agent(
  subagent_type: "general-purpose",
  prompt: "/unikit-architecture",
  description: "Generate project architecture",
  skills: ["unikit-architecture"]
)

Wait for the Agent() call to return before proceeding to Step 11.

Fallback (only if the Agent tool is unavailable in the current environment): invoke /unikit-architecture inline in this skill's context, wait for it to return, then proceed to Step 11. Unlike Step 9.8, Step 11's summary explicitly lists .unikit/ARCHITECTURE.md as a generated artifact — the flow must complete in the same turn, so inline execution is the mandatory fallback here.

After the subagent (or inline invocation) returns, immediately print Step 11 in the same response.

---

Step 11: Print Setup Summary (final action)

In the same turn that /unikit-architecture returned, print the setup summary. This is the very last action of the workflow — after it, there is nothing left to do.

Project context configured!

Config file:        .unikit/config.yaml (edit to customize language, git, workflow)
Project description: .unikit/DESCRIPTION.md
Project map:        AGENTS.md
Architecture:       .unikit/ARCHITECTURE.md
Memory rules:       .unikit/memory/ (see RULES_INDEX.md)

Next steps:
- /unikit-plan <feature> — Plan a feature implementation
- /unikit-implement — Execute an existing plan
- /unikit-review — Review code quality

Game design (optional):
- /unikit-gd-brainstorm <idea> — Ideate a concept (pillars, loops, pre-mortem)
- /unikit-gd-spec — Author the master GDD (GAME.md) + system map
  The design workspace (.unikit/gamedesign/) is created on first use.
  /unikit-plan then cites the design's acceptance criteria in its ## Design section.

Ready when you are!

If the project already has code (scan detected existing scripts), also append:

Your project already has code. You might also want:

- /unikit-review — Review existing code for conventions

Additionally, if the project has code but no game-design doc yet — the Step 6 scan detected existing scripts and .unikit/gamedesign/GAME.md does not exist (check with Glob/Read) — append the brownfield-reconnaissance offer. This is a handoff: recommend the command, do not run it inline. Gate on both conditions (recon is strictly cold-start — a project that already has a GDD uses /unikit-gd-explore's code lens instead); do not gate on "gd-skills are installed" — the wizard installs all skills:

- /unikit-gd-recon — Reconstruct a GDD skeleton from your existing code (brownfield
  cold-start) → then /unikit-gd-spec import. Read-only; writes one RECON.md, calls nothing.

---

Rules

1. Scan reality, not assumptions — every technology listed must be found in the project
2. Do NOT implement — this skill only sets up context. No project code, no feature code
3. Do NOT modify existing code — only create/update context files
4. Skip defaults — don't list default engine packages (per filter in ENGINE_RULES.md)
5. Confirm before executing — show the analysis and plan, wait for user approval
6. Delegate architecture — /unikit-architecture for architecture doc, don't generate it here
7. Never overwrite an existing .unikit/config.yaml — merge mode only adds missing keys via targeted Edit, never a full rewrite

Artifact Ownership

• Primary: .unikit/config.yaml, .unikit/DESCRIPTION.md, AGENTS.md
• Delegated: .unikit/ARCHITECTURE.md via /unikit-architecture
• Read-only: .unikit/RULES.md, engine project settings (per ENGINE_RULES.md)