원클릭으로 Manus에서 모든 스킬 실행

projex-framework

스타4

포크0

업데이트2026년 7월 17일 14:25

When these mentioned:`close-projex``eval-projex``execute-projex``do-projex``plan-projex``propose-projex``review-projex``explore-projex``redteam-projex``audit-projex``interview-projex``patch-projex``revise-projex``simulate-projex``debug-projex``navigate-projex``guide-projex``imagine-projex``define-projex``archive-projex``scan-projex``memo-projex``orchestrate-projex`, load both this skill and a file with that exact name (located besides this SKILL.md).

설치

Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.

Manus에서 실행

출처

No3371

No3371/projex

GitHub 저장소 열기 Creator 저장소 보기

다운로드

Manus에서 실행

Authoring

File naming: {yymmddhhmm}-{projex-name}-{projex-type}.md

Cross-reference related projex in all involved documents
Front-load key info for quick assessment at a glance
Reference by filename, not path — Projex files move between folders (active → closed → archived), so absolute/relative paths break. Use the filename alone whenever you try to reference any projex in projex files: 2602081430-virtual-checkpoint-token-impl-doc-plan.md, not ../../../impl/.projex/2602081430-virtual-checkpoint-token-impl-doc-plan.md. Filenames are unique by date-prefix convention.
Note nav derivation — Projex created from a nav must record > **Nav:** {nav-filename} near the top. This is the only signal close/patch uses to update the nav back.

Dehydrate

All projex output uses the densest form that fully preserves semantic and technical content, while keeping text grammatically parseable. Fragments are fine; ungrammatical grunt-speak is not. This is not a mode — it is how projex documents are written.

Techniques:

Drop filler words — remove articles, prepositions, connectives where meaning survives without them
- "The parser module is responsible for converting the input stream into an AST" → "Parser module: converts input stream → AST"
Short synonyms — prefer the shortest word that carries the same meaning
- "implement a solution for" → "fix" | "extensive" → "big" | "in order to" → "to" | "at this point in time" → "now" | "utilize" → "use"
Key-value shorthand — replace narrative with key: value structure
- "The migration is currently blocked because the schema validator has not been updated" → "Migration: blocked — schema validator not updated"
Finding pattern — for observations/steps, use [thing] [action] [reason]. [next step].
- "Auth middleware rejects valid tokens — expiry check uses < not <=. Fix: swap operator."
Symbolic compression — → (produces/becomes), ← (sourced from), ✓/✗ (pass/fail), | (or/alternatives), ~ (approximately)
Inline lists — for items under ~5 words each, use | separators instead of bullet lists
- "Affected: auth module | session store | token validator"
No transitions — omit "Moving on to..." / "Now that we've covered X..."
Compressed headers — strip filler from section titles
- "## Analysis of the Current Authentication State" → "## Auth Current State"
Abbreviate when unambiguous — impl, config, auth, repo, fn, param, dep, req, res, spec, DB (define on first use if non-standard)

Preserve exact — never dehydrate these:

Technical terms, identifiers, API names, file paths
Code blocks (unchanged)
Error messages (quote verbatim)
Version numbers, commit SHAs, line numbers

Clarity carve-outs — drop dehydration for:

Security warnings and irreversible-action confirmations
Multi-step sequences where fragment order could be misread
Sections aimed at a confused or first-time reader

Resume dehydration once the clarity-critical section ends.

Relationship to De-slop: Dehydrate governs how content is written. De-slop catches filler that slipped through anyway. Both apply — Dehydrate is the standing register, De-slop is the safety net.

De-slop (optional final pass)

Before finalizing any generated projex document, re-read it as a reader — not as the agent that wrote it — and strip:

Agent self-talk — "I'll now...", "Let me analyze...", "As I mentioned...", "This step will..."
Throat-clearing — "Note that...", "It's worth mentioning...", "It's important to..."
Redundant restatements — content that repeats what the previous sentence or section already said
Hollow hedging — "may potentially", "could possibly", "in some cases might"
Unfilled template artifacts — leftover placeholder text, example labels, or structural scaffolding that wasn't replaced with real content

The document is an artifact for humans and future agents to act on — not a transcript of the writing process. If a sentence adds no information a reader couldn't infer, cut it.

This pass is optional: apply it when the draft reads like it was narrated rather than written, or when sections are padded. Skip it when the draft is already tight.

Organizing

Files live in .projex/ folders in one or more paths (each dedicated to a individual domain/module/components/area/scope, etc.). Location in projex folders reflects state:

Active → .projex/
Closed → .projex/closed/
Archived → .projex/archived/
Abandoned → .projex/abandoned/ (or deleted)

A repo may have multiple .projex/ folders scoped to different areas (e.g., docs/.projex/, src/.projex/). Each is independently managed. New projex should not cross area boundaries or violate dependencies, for example a language spec update projex should not touch runtime implementation, and vice versa.

your-repo/
├── .projex/              # Master projexs
│   ├── closed/
│   └── ...
├── docs/.projex/         # Doc-scoped projexs
├── src/.projex/          # Src-scoped projexs
└── ...

Lifecycle Status

Every projex document that carries a lifecycle Status field draws its value from ONE canonical vocabulary. Type-specific terminal meanings (Accepted, Rejected, Resolved, Stable, Concluded, Done, …) survive as an inline outcome qualifier on a canonical state — never as their own lifecycle stage.

Canonical vocabulary

State	Meaning	Folder
`Draft`	Authored, still changing, not yet reliable	`.projex/`
`Ready`	Finalized & actionable, not yet started (types with an execution phase only)	`.projex/`
`In Progress`	Actively being worked / executed	`.projex/`
`Blocked`	Stalled awaiting an external dependency; resumes when it clears	`.projex/`
`Escalated`	Agent exhausted its ability; handed back to a human to decide or take over	`.projex/`
`Complete`	Terminal — done	`.projex/closed/`
`Abandoned`	Terminal — dropped without completion	`.projex/abandoned/`

Blocked waits on a thing (another task, a resource) and resumes automatically when it clears. Escalated waits on a human judgment the agent cannot make itself.

Strict Status blockquote

Status is machine-readable via a single strict line — the > **Status:** blockquote. No YAML frontmatter; this blockquote is the one source of truth.

Grammar: > **Status:** <state> optionally followed by (<outcome>), where <state> is exactly one canonical value.

> **Status:** In Progress
> **Status:** Complete (Accepted)
> **Status:** Escalated (Non-Repro)

One regex parses it: ^> \*\*Status:\*\* ([\w ]+?)(?: $(.+)$)?\s*$ → group 1 = state, group 2 = optional outcome.

Exceptions

Never-closed types (Definition, Navigation): may sit at Complete while staying in .projex/ rather than moving to .projex/closed/. Complete here means "current stable state"; they drop back to In Progress on revision.
Per-item statuses are out of scope. Objective status (Success / Partial / Failed) and per-target / per-question status (Pending / In Progress / Done / Dropped) are not document lifecycle. They use plain bold (not the > **Status:** blockquote) and are left untouched.

Workflow

Workflow specs are actions invoked in verb sense:

/propose-projex.md I want to add XXX feature.
/eval-projex.md Does current spec compatible with this proposal? or /eval-projex.md What can be improved in the current implementation?
/plan-projex.md Update current impl to keep up with latest specs. or /plan-projex.md @2607311430-database-service-refactor-proposal.md
/review-projex.md @2607311430-language-macro-syntax-change-proposal.md
/redteam-projex.md @2607311430-auth-system-plan.md
/audit-projex.md the database migration we just finished
/interview-projex.md authentication system design
/patch-projex.md Fix the off-by-one error in the parser loop or /patch-projex.md Execute objective 2 of @2602011430-api-cleanup-plan.md
/revise-projex.md @2602011430-api-cleanup-plan.md Step 2 assumed Redis, it's actually Memcached (Patch = fix code; Revise = fix what a projex document claims)
/simulate-projex.md What happens if we remove the legacy compatibility layer?
/debug-projex.md Login button does nothing on Safari iOS — works on Chrome/Firefox
/navigate-projex.md Game engine project roadmap or /navigate-projex.md @2602011430-engine-roadmap-nav.md
/define-projex.md The authentication subsystem or /define-projex.md @2602151430-auth-subsystem-def.md expand session lifecycle
/guide-projex.md Understand our authentication system end-to-end
/imagine-projex.md What would a plugin system for this framework look like?
/execute-projex.md @2607311430-language-macro-syntax-change-plan.md
/close-projex.md after user reviewed execution results
/orchestrate-projex.md Add user authentication to the API or /orchestrate-projex.md Refactor the payment module per @2604031730-payment-cleanup-proposal.md

Auxiliary Artifact Commit Policy

Auxiliary workflows (all workflows except execute, close, patch, and simulate) produce artifacts — documents, reports, definitions, maps, logs, memos, scans — but do not commit them automatically. The workflow creates and presents the artifact; committing happens only when the user explicitly requests it.

Auxiliary workflows: propose, plan, eval, review, redteam, audit, interview, guide, explore, imagine, scan, memo, map, navigate, define, archive.

Execute, close, patch, revise, and simulate are exempt — they commit as a structural requirement of their lifecycle. For simulate specifically: the ephemeral branch is always discarded and the report is the sole surviving artifact; committing it completes the simulation rather than being an incidental save.

Pattern for auxiliary workflows:

Create the artifact file
Present it to the user (surface path, summary, key content)
Wait — commit only if the user explicitly requests it (e.g., "commit this", "save it", "push it")

The commit commands shown in auxiliary workflow docs are reference templates, not automatic steps.

Git Integration

The Execute → Walkthrough cycle uses an ephemeral branch for isolation and clean rollback.

[base branch] ── execute-projex ──> [projex/{yymmddhhmm}-{plan-name}] ── close-projex ──> [merge back]

/execute-projex.md creates ephemeral branch from current HEAD
All implementation happens in the ephemeral branch
/close-projex.md finalizes: squash merge (default), merge, rebase, or abandon

Prerequisite: Plan must be committed to base branch before execution — ensures plans survive abandoned executions and are reviewable independently.

Repo Resolution

When a projex file is referenced (@<file>), derive the target repo from that file's path — cd to its directory and git rev-parse --show-toplevel from there. This is the first action, before any other git commands or file reads. The projex file's location is the source of truth; never rely on the session's initial cwd. All git commands for the rest of the workflow must run from this repo root.

When no file reference is given, infer the target repo from context (cwd, recent mentions, project structure).

Utility Scripts

Scripts live next to this file as .{sh|ps1}. All workflow examples use {projex-scripts}/ as a placeholder — substitute the absolute path to the directory containing this SKILL.md (e.g., if loaded from /home/user/projex/SKILL.md, then {projex-scripts}/stage-n-commit.{sh|ps1}).

Committing

stage-n-commit — stages explicit files and commits atomically with rollback on failure.

{projex-scripts}/stage-n-commit.{sh|ps1} <repo-root> "commit message" ["--flag [value]" ...] file1 [file2 ...]

Any argument starting with -- is passed to git commit as an extra flag. A flag+value pair can be supplied as one quoted string (e.g. "--trailer Co-authored-by: Claude"). File paths never start with --, so no separator is needed.

Selective Staging

stage-by-pattern — filters unstaged diff through a regex and stages only matching +/- lines. Useful for structured changes (renames, signature updates) where the diff is highly regular.

{projex-scripts}/stage-by-pattern.{sh|ps1} <repo-root> <pattern> [-v] [-n] [-- file1 file2 ...]

-v inverts (stage everything except matches). -n dry-runs (prints filtered diff). For replacement pairs (-old/+new), the pattern should match both sides — e.g. 'getFoo|getBar' not just 'getBar'.

Moving

move-n-stage — batch git mv with rollback on failure. Stages the moves but does not commit.

{projex-scripts}/move-n-stage.{sh|ps1} <repo-root> src1 dst1 [src2 dst2 ...]

Arguments are src/dst pairs. On any failure, all completed moves are rolled back in reverse order.

Deleting

del-n-stage — batch git rm with rollback on failure. Stages the deletions but does not commit.

{projex-scripts}/del-n-stage.{sh|ps1} <repo-root> file1 [file2 ...]

On any failure, all completed deletions are rolled back in reverse order from temp backups. Untracked files are removed from disk only (no staging effect).

Reading Files

read_file — line-numbered file reader util, ONLY use this when you don't have any tool to read file besides raw shell commands.

{projex-scripts}/read_file.ps1 -Path <file> [-From <n>] [-To <n>] [-Pattern <p1>,<p2>,...] [-Context <n>]

No flags: dumps entire file with zero-padded line numbers (01 using System;)
-From / -To: restricts output (and search) to a line range. Only reads up to -To lines from disk — safe for large files
-Pattern: searches for regex patterns within the range (or whole file). Outputs matching lines plus -Context surrounding lines (default 3). Non-contiguous groups separated by ---
Combined: -From 50 -To 200 -Pattern "TODO","FIXME" -Context 5 searches lines 50–200, shows matches with 5 lines of context

Worktree Creation

projex-worktree — creates a worktree in {repo-name}/.projexwt/ inside the repo, and registers .projexwt/ in the repo's .git/info/exclude so the parent's git status stays clean.

{projex-scripts}/projex-worktree.{sh|ps1} <repo-root> <branch-name> [<base-ref>]

The worktree is created at {repo-name}/.projexwt/<branch-suffix>/ (inside the repo, so it stays in the editor workspace) where <branch-suffix> is the last path segment of <branch-name>.

Branch Finalization

projex-squash-close — Squash-merge ephemeral → base, delete ephemeral. Usage: {projex-scripts}/projex-squash-close.{sh|ps1} <repo-root> <base> <ephemeral> "msg" [--worktree]
projex-merge-close — Merge with full history → base, delete ephemeral. Usage: {projex-scripts}/projex-merge-close.{sh|ps1} <repo-root> <base> <ephemeral> "msg" [--worktree]
projex-abandon — Checkout base and force-delete ephemeral. Usage: {projex-scripts}/projex-abandon.{sh|ps1} <repo-root> <base> <ephemeral> [--worktree]

Each validates inputs, reports failure with state context, and rolls back on error.

When --worktree is passed, the script removes the worktree at {repo-name}/.projexwt/<branch-suffix> instead of checking out base. The main working directory must already be on the base branch (which it is — worktree mode never leaves it).

Git Operation Discipline

For operations not covered by the scripts above (read-only queries, git checkout -b, git stash), use raw git commands with these rules:

CRITICAL: Different git operation types (add, commit, checkout, branch, merge, rebase, stash) must be separate tool calls. Never combine them — not with &&, not with ;, not as parallel calls.

One operation type per call — git add in one call, read its output, then git commit in the next call. A single git add with multiple file arguments is fine, but add and commit must never share a call.
Read output before proceeding — After each call, actually read its output and confirm it succeeded. Do not fire-and-forget.
Stop on failure — If any git operation fails, address it before continuing
Stage by explicit path — git add <file> ... by exact path. Never git add ., git add -A, git add -u, directories, or wildcards
Never mix scripts with raw git — When a utility script covers an operation (stage-n-commit, move-n-stage, del-n-stage, stage-by-pattern), use the script exclusively. Do not combine script calls with raw git add, git mv, git rm, git reset, etc. in the same logical operation — the scripts manage their own rollback, but raw commands outside them are unmanaged and break atomicity
Stash discipline — If you git stash to get a clean working state, log it in the execution log so it is not forgotten. Stashed changes are restored during /close-projex after branch finalization

Worktree Mode (Optional)

Worktree mode creates ephemeral branches as separate working directories in {repo-name}/.projexwt/ (inside the repo) instead of switching the main working directory via git checkout. The main directory stays on the base branch throughout.

Auto-determined by plan-projex: The planning workflow checks for uncommitted changes, active projex/* execution branches, and scope of changes, setting > **Worktree:** Yes when dirty state, parallel execution, or large/many-file changes are detected. The user can override the auto-determined value in the plan draft. Simulations default to worktree mode.

How it works:

projex-worktree creates the worktree in .projexwt/ inside the repo
All execution happens in the worktree directory ({repo-name}/.projexwt/<name>/)
stage-n-commit works unchanged (-C accepts worktree paths)
Finalization scripts receive --worktree flag to remove the worktree instead of checking out base
No stashing needed — the base branch working directory is never touched
Bootstrap contract: a fresh worktree shares .git but starts with only git-tracked files — gitignored artifacts (node_modules, .env, venv/, build output) are absent by design. Their absence is expected, not a blocked precondition: bootstrap them (run the project's install/build command) before execution rather than treating missing deps as a stop condition. What gets installed here is exactly what the Cleanup contract removes before close.
Cleanup contract: anything created in the worktree that git does not track — symlinked/installed deps (node_modules), build output, scratch files — must be removed before close, and any tracked edits committed. Close scripts refuse to finalize over a non-clean worktree (untracked files or uncommitted tracked changes). Ignored content (deps/build output) does not block git-level removal, but can make removal fail mid-way in environment-dependent ways (seen with symlinked deps in a Linux docker sandbox, and with file locks/CWD-in-worktree on Windows) and leave a stray directory to clean up — so remove agent-created ignored tooling too.

Benefits over checkout mode:

No clean-state requirement at execution start
No working directory disruption (editors/IDEs unaffected)
Parallel executions possible (multiple worktrees)
Crash-safe — main directory always on base branch

Worktrees live inside the repo at {repo-name}/.projexwt/, so they stay in the editor workspace. projex-worktree registers .projexwt/ in the repo's .git/info/exclude (local, uncommitted) so the checkout never shows up in the parent's git status — no tracked .gitignore entry is added.

Notes

Execute/Walkthrough and Simulation use ephemeral branches
Simulation branches (.projex/sim/) always discarded — only report committed to base
Other workflows operate on current branch, committed normally
Walkthrough committed as final commit before merge

NOTES

AVOID ABSOLUTE PATHS

Use file paths RELATIVE to project root. REDACT external paths.

NO PARALLEL EXPLORATION WITH WORKFLOWS

Workflow files (ex: execute-projex) may have requirements before starting, fully comply before reading stuff into context.

name