메뉴
Modify Linux kernel or NuttX .config files from command line without interactive menuconfig. Use when needing to enable/disable config options, set values, query option states, or batch-modify kernel configurations in scripts or CI/CD pipelines.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
SOC 직업 분류 기준
Checks API documentation coverage and sync status against source header files. Use when adding new APIs, modifying header files, or auditing documentation completeness for openvela modules (kernel, bluetooth, media, telephony, etc).
NuttX/Vela 驱动代码质量审查（59 Pattern + 双轮交叉验证 + 量化评分）。 Use when: driver review, driver code review, 驱动审查, 驱动代码审查, review driver, 审查驱动代码, NuttX driver review, 驱动质量检查, review nuttx/drivers, review arch/ driver, 驱动提交前检查. 即使用户只说"帮我审查下这个驱动"也应触发。 驱动开发/实现(use nuttx-driver-development).
Create, update, review, or audit NuttX RTOS C device drivers. Covers sensor (uORB), char device, network (ethernet, MAC, PHY, DMA, netdev, SPI-Ethernet, CAN, SocketCAN, CAN FD, CAN bus, LIN, LIN bus, LIN master, LIN slave), framebuffer (fb, LCDC, display controller), LCD (SPI LCD, I2C LCD, ST7789, SSD1306, ILI9341, lcd_dev, lcd_framebuffer), USB (Host Controller Driver and device Controller Driver), audio (I2S smart PA, power amplifier, audio_comp), power/battery (charger, monitor, gauge), MCAL (AUTOSAR MCAL adaptation, EB Tresos, MCAL upper-half bridging), I2C/SPI bus, Kconfig/build integration, and board registration. Use for driver implementation, code audit, sensor/timer/LED/ethernet/CAN/LIN/fb/LCD/audio/PA/battery subsystems, or board bringup.
openvela 固件编译、配置和模拟器运行。Use when: 编译 openvela、build、make、构建、menuconfig、运行模拟器、emulator、编译报错修复。
向 openvela 社区提交 Pull Request。通过 Fork 模式提交（先 fork 上游仓库，push 到 fork，再从 fork 向上游提 PR）。支持单仓库或多仓库批量提交、指定文件/分支、自动检测 GitHub/Gitee 平台、分支模糊匹配、MCP 配置引导。Trigger: 提交 PR、提交代码到社区、push 到 openvela、创建 pull request、批量提交、多仓库提交。
openvela 技术书籍稿件审校 Agent。以资深技术书籍编辑和 NuttX 架构专家的视角，对飞书云文档中的书稿内容进行逐字逐句审查。 涵盖出版社写作规范（22 条）、技术准确性、编辑审校三个维度。 使用方式：提供飞书文档 URL 或 doc_id，Agent 将读取文档内容并输出审校报告和修改建议。 当用户提到以下关键词时触发：审校、审稿、书稿审查、稿件评审、review 书稿、检查文档规范、技术书审校、出版规范检查、书籍审校、manuscript review。
| name | kconfig-tweak |
| description | Modify Linux kernel or NuttX .config files from command line without interactive menuconfig. Use when needing to enable/disable config options, set values, query option states, or batch-modify kernel configurations in scripts or CI/CD pipelines. |
Command-line tool for modifying .config files without launching interactive menuconfig.
# Enable/disable options
kconfig-tweak --enable DEBUG_INFO
kconfig-tweak --disable MODULES
kconfig-tweak -e SMP -d PREEMPT # Multiple in one command
# Set values
kconfig-tweak --set-val LOG_BUF_SHIFT 17
kconfig-tweak --set-str LOCALVERSION "-custom"
# Query state
kconfig-tweak --state DEBUG_INFO # Returns: y, n, m, or undef
# Specify config file
kconfig-tweak --file boards/myboard/.config --enable USB
# Module support
kconfig-tweak --module DRM # Set to m (module)
| Command | Short | Description |
|---|---|---|
--enable OPTION | -e | Set option to y |
--disable OPTION | -d | Set option to n |
--module OPTION | -m | Set option to m (module) |
--set-val OPTION VALUE | - | Set integer/hex value |
--set-str OPTION STRING | - | Set string value (quoted) |
--undefine OPTION | -u | Remove option definition |
--state OPTION | -s | Query current state |
Insert options after a specific option (useful for maintaining config order):
kconfig-tweak --enable-after USB USB_STORAGE # -E
kconfig-tweak --disable-after NET BRIDGE # -D
kconfig-tweak --module-after DRM DRM_I915 # -M
| Option | Description |
|---|---|
--file FILE | Target config file (default: .config) |
--keep-case / -k | Preserve symbol case (default: auto-uppercase) |
CONFIG_ - Symbol prefix (default: "CONFIG_")# Enable multiple debug options
kconfig-tweak -e DEBUG_INFO -e DEBUG_FS -e KALLSYMS
# Configure network stack
kconfig-tweak --file .config \
-e NET -e INET -e IPV6 \
--set-val TCP_CONG_CUBIC y
# Start from defconfig, then customize
make defconfig
kconfig-tweak -e DEBUG_INFO -d MODULES
make olddefconfig # Resolve dependencies
# Check current state
STATE=$(kconfig-tweak -s PREEMPT)
if [ "$STATE" = "y" ]; then
kconfig-tweak -d PREEMPT
fi
make olddefconfig after modifications--keep-case is used