circuit

name

circuit

description

Operate Circuit, the flow engine that runs coding work as structured, evidence-backed flows (Fix, Build, Explore, Review, Prototype). Use this skill at the START of any substantive coding task in a project where Circuit is installed: fixing a bug, building a feature, refactoring, reviewing a diff or PR, investigating a question, or prototyping. Also use it whenever the user mentions Circuit, flows, runs, checkpoints, run folders, the power dial or process override, connectors, or asks to create, generate, preview, configure, or resume a flow. If a coding request arrives and Circuit is available, consult this skill before doing the work by hand.

Operating Circuit

Circuit turns a coding task into a run of a named flow: a repeatable process with typed reports, verification, checkpoints, and a trace you can audit. Your default posture in a Circuit-enabled project is: route substantive work through Circuit instead of doing it freehand. The point is not ceremony. A run leaves evidence (what was tried, what was verified, what the reviewer said), survives interruption (resume from a checkpoint), and compounds (the process improves in one place instead of being re-improvised every session).

When to route through Circuit, and when not to

Run it through Circuit when the task has real shape: a bug to fix, a feature to build, a decision to investigate, a diff to review, a prototype to try. That covers most coding work.

Work directly (no run) when:

• The task is trivial or conversational: a one-line answer, a rename, a question about code you can answer by reading one file.
• You are already inside a Circuit run as a relayed worker. Never start a nested Circuit run from inside one; do the relayed work directly.
• The user explicitly asks you to skip Circuit, or is debugging Circuit itself in a way a run would confuse.
• Circuit is not installed and the user did not ask for it. (Check before assuming; see "Finding the front door.")

When you skip Circuit for a borderline task, say so in one line so the user can redirect you.

Finding the front door

Resolution order:

1. Claude Code plugin installed: prefer /circuit:run <task> semantics. Directly, that means the plugin wrapper: node "${CLAUDE_PLUGIN_ROOT}/scripts/circuit.js" present run <flow> --goal '<task>'. The present mode renders progress and checkpoint questions for the user; do not parse its output as JSON.
2. Working inside a Circuit checkout: ./bin/circuit run <flow> --goal '<task>' from the repo root (it loads compiled flows from generated/flows).
3. Global CLI: circuit run <flow> --goal '<task>'.

If unsure whether the environment is healthy, circuit doctor reports readiness: it checks the connector CLIs your flows would actually use (installed, signed in) before a run spends anything on a broken one, and prints the fix for each problem. It exits 0 when every chosen connector is healthy; connectors your config never chooses are listed separately as optional and never fail the check.

Shell safety: always single-quote the --goal text. Escape embedded apostrophes as '\''. The task text is user-controlled input; double quotes would let $VAR and $(cmd) expand.

Choosing the flow

The CLI always takes an explicit flow name; you choose it. State your pick and a one-line reason before invoking, so the user can redirect.

Flow	Choose it for	Writes?
Fix	Bugs, regressions, failing tests, crashes, flaky behavior, production issues.	Yes
Build	Features, refactors, docs, tests; focused changes that are not mainly bug fixes.	Yes
Explore	Investigation, explanation, tradeoff comparison, a decision before editing.	No
Review	Audit of code, a diff, a PR, a plan, or a risk surface. Audit-only.	No
Prototype	Disposable prototypes, mockups, UI sketches, model-comparison variants before Build.	Local prototype evidence

Two forks matter for safety, so ask one short question if genuinely unclear: Review vs Fix/Build (audit vs change) and Explore vs Build (decide vs do). Otherwise do not interrogate the user; pick and say why.

If the user stated why the task matters (stakes, what it unblocks), pass it as --why '<reason>'. Never invent one.

The power dial

• --power <auto|low|medium|high> is the one dial (default medium). It sets how much model each worker gets, without naming models, and it also derives how thorough the run's process is: low/medium/high map straight across, auto derives medium and lets the run pick its own model tier from what the research step reads. The derived thoroughness clamps silently to what each flow supports (Build, Explore, and Fix run the full ladder; Prototype floors at medium; Review always runs medium).
• --process <low|medium|high> is the advanced override for the rare case where model strength and process thoroughness should split (say, strong models on a quick single pass). An explicit --process beats the derivation. On Fix, process low skips the independent review stage. On Build, process high iterates the plan slice by slice with verification per slice and parks at an intake checkpoint before write-capable work — so a bare --power high Build run will pause once for scope confirmation. --depth is retired and rejects as an unknown option.

Match spend to stakes: quick sanity pass on a small fix → --power low. Risky change on a load-bearing path → --power high. The default is right for most tasks. Before an expensive run, circuit preview <flow> --power high shows exactly which connector, model, and effort every step would get, without spawning anything; --matrix shows all tiers side by side.

Two more run modes where supported: --tournament [2|3|4] (optional inline count, default 3) (Explore decision options; Prototype implementation variants judged against a rubric) and --autonomous (Build, Explore, Fix, Prototype: auto-resolves supported checkpoints and drives a bounded continuation loop that must prove completion against evidence framed at intake — it never reports complete by running out of attempts).

Reading a run

Every run writes a run folder under .circuit/runs/<run-id>/: a trace.ndjson (ordered record of everything), typed reports under reports/ (including operator-summary.md for the user and result.json with selected_flow, outcome, run_folder), and evidence. When a user asks "what happened in that run," read reports/operator-summary.md first, then the trace only if you need step-level detail.

Exit codes are a contract: complete exits 0; a pause at a checkpoint also exits 0 (the run is parked, waiting); any close short of complete (aborted, stopped, escalated, handoff) exits 1; usage error exits 2. &&-chaining therefore only proceeds on a completed run.

Checkpoints. When a run pauses to ask something, relay the question to the user faithfully, then resume:

circuit resume --run-folder '<run_folder>' --checkpoint-choice '<choice>'

circuit checkpoints lists every run parked at a decision, with its question, choices, and the exact resume command. Check it when a user returns to a project or asks "was anything waiting on me?"

Continuity. circuit handoff save records a cross-session handoff; handoff resume and handoff brief restore and summarize it. Reach for this when a session must stop mid-work.

Configuration

Two YAML files, same schema, layered defaults < user-global < project < invocation:

• ~/.config/circuit/config.yaml — personal defaults.
• ./.circuit/config.yaml — project overrides.

Start minimal (schema_version: 1) and add only what you need. Edit via circuit config set|unset|show <dotted.key> [value] [--global] (validates before writing, preserves comments) or edit the YAML directly.

The most useful levers, in the order people actually need them:

1. Connector routing — which CLI does the work per role/flow: relay.roles.reviewer, relay.circuits.<flow>, relay.default. Built-ins: claude-code (trusted same-workspace writes), codex (write-capable via codex exec), cursor-agent (Gemini implementer).
2. Power — defaults.power, power_auto: {floor, ceiling}, and power_tiers.<connector> to remap what each dial position means.
3. Skills — Circuit injects your local SKILL.md files (~/.agents/skills, ~/.claude/skills) into relay prompts: circuits.<flow>.selection.skills to always load one, skill_hooks to load one only when a moment fires (e.g. after:edit-files:.tsx → react skill, after:verification-failed → debugging skill).
4. Per-flow pins — circuits.<flow>.selection.model pins one flow to one model; the dial no longer moves it.

Always circuit preview <flow> after a config change: it resolves the same selection code a real run uses and flags problems before you pay for a run.

Full recipes (custom connectors, local Ollama workers, tournament variants): read references/configuration.md.

Creating new flows: judgment first

Circuit can mint new flows cheaply. That is exactly why you should be slow to do it. Every published flow adds a permanent question to the user's life: "which flow do I use for this?" A flow catalog that grows past what a person can hold in their head destroys the product's core value, which is that the right process is obvious. Flows should be few, distinct, harmonious, and mutually amplifying — never overlapping territories a user must adjudicate.

So when you notice a recurring pattern that no flow serves, climb this ladder and stop at the first rung that works:

1. Dials and phrasing. Would an existing flow with different depth, power, or a sharper --goal do it? Usually yes.
2. Config. Attach a skill (selection.skills), a skill hook, or connector routing to an existing flow. "We keep forgetting X during fixes" is a skill-hook problem, not a new-flow problem.
3. Memory note. circuit memory note --flow fix "prefer minimal repros before patching" codifies guidance without any new surface. Notes cite a real run artifact, so this works only after the project has at least one run; in a fresh project, run first, note after.
4. Disposable bespoke flow. circuit generate --description '<task>' composes a one-off flow for an unusual task shape. Use it and let it go; do not publish it just because it worked once.
5. Published custom flow. Only when the same distinct shape has come up repeatedly (rule of three), no built-in flow covers it, and it will not make any existing choice harder. circuit create --name '<slug>' --description '<idea>' instantiates a proven family template.

Before rung 5, make the case out loud to the user and get their yes:

• Territory test: describe the new flow in one sentence next to each of the six built-ins. If any pair could claim the same task, the boundary is unclear; sharpen it or stop.
• Name test: would the user know from the name alone when to reach for it, six weeks from now?
• Amplify test: does it feed or reuse the others (produce evidence a built-in consumes, or compose built-in blocks), or does it fork a parallel universe? Prefer flows that make the existing set stronger.
• Retirement: if a custom flow stops earning its place, recommend removing it. A small catalog is a feature.

Mechanics of create vs generate, custom flow homes, validation, and how to run a published custom flow: read references/flow-authoring.md.

Talking to the user

Succinct and plainly spoken, always. The run already carries the detail — the trace, the typed reports, the operator summary — so chat carries only what the user must decide or know. Rich detail belongs in the --goal text (where the worker needs it) and in the run folder (where it can be audited), not in chat. Assume the user does not care about Circuit's internals; they want the work handled and a readout they can absorb at a glance. Short sentences, one idea each. Plain words, not runtime vocabulary: say "it paused to ask you X", not checkpoint ids, route names, or trace kinds. And no scaffolding labels ("Reason in one line:", "Why this shape:") — just say the thing.

One consistent readout card, never improvised. A format the user sees every time becomes glanceable; a fresh layout each time must be re-read. Chat renders as plain text in a terminal, so the card is a fenced block, ASCII only. Proposing a run:

circuit · fix — release-blocking bug in checkout totals
  power  [##.] medium   default; process follows the dial

Dial gauges: low [#..], medium [##.], high [###], auto [~~~]. Add a process line only when --process explicitly overrides the derived value, and a mode line only when tournament or autonomous is on. Around the card, at most a sentence or two. Closing a run reuses the same shape, dial lines swapped for outcome lines:

circuit · fix — complete
  changed   src/cart.js · tests/cart.test.js
  verified  7/7 tests pass
  evidence  .circuit/runs/<run-id>/

A pause is the same card with — paused, needs your call and question / choices lines. Do not narrate the machinery between cards; the present wrapper already shows progress.

• Keep the CLI out of chat. Do not show the commands you ran to inspect or verify (preview, config show, doctor); state what they proved in plain words. Show a command only when the user must run it themselves or explicitly asked to see it.
• Same for files: do not paste config YAML or report contents into chat. Say what each change does in one plain line, plus the file path so they can open it.
• When a run closes short of complete, report the honest outcome and where the evidence is. Never dress stopped up as done. Honest and brief are not in tension: "stopped at review, two findings, evidence in " is both.
• Build, Fix, and Prototype disclose before write-capable work starts: a worker can edit the checkout. Do not suppress that.
• For a Review of untracked files, only add --include-untracked-content when the user confirms those contents are safe to send to the worker.
• If a run cannot recover, it is safe to delete its folder under .circuit/runs/ and start again. circuit reclaim cleans up orphaned worktrees after a killed fanout.

Reference files

• references/cli.md — every command and flag, with examples: run, resume, handoff, history, memory, create, generate, uninstall, runs, reclaim, checkpoints, preview, doctor, config, version.
• references/configuration.md — full config schema recipes: routing, power tiers, auto power, skills, skill hooks, custom connectors, local models, tournament variants.
• references/flow-authoring.md — creating, generating, validating, publishing, and retiring custom flows; the anti-proliferation checklist in long form; how built-in flows are authored in the Circuit repo.