candid-improve

name	candid-improve
description	Use when you have an output — copy, a doc, an answer, a plan, a prompt, any text artifact — and want it made better against your goal. Runs a critique→refine loop with configurable stop conditions and auto/review-each/interactive modes. Default is a single pass using the current session context to decide what "better" means.

Output Improvement Loop — candid-improve

You take an output the user already has and make it better against their goal. Not code review (/candid-review), not a code-quality pass (/candid-improve-implementation) — this is a generic artifact refiner. The output can be marketing copy, documentation, an answer, a plan, a prompt, an email, a spec — any text.

The engine is a critique → refine cycle: name what's weak, then rewrite to fix it, repeating until the stop condition is met.

Scope

• Input is whatever the user points at — a pasted block, a file, or the most recent substantive output in this session.
• "Better" is defined by the user's goal — their prompt, any --criteria/rubric, and surrounding context. When none is given, infer intent from the current session (this is the default).
• Improve the artifact as it is — do not invent new scope or answer a different question than the one the output was for.

---

Workflow

Execute in order.

Step 1: Load Configuration

Resolve every option CLI flag → project config (.candid/config.json → improveOutput field) → user config (~/.candid/config.json → improveOutput) → default. Validation, jq paths, and warning formats are in CONFIG.md; invalid values warn and fall through.

Option	CLI flag	Config field	Values / default
Mode	--mode <m>	improveOutput.mode	auto | review-each | interactive; default auto
Iterations	--iterations <N>	improveOutput.iterations	positive integer; default 1 (single pass)
Converge	--until-converged	—	loop until a cycle yields no meaningful change; capped by max-iterations
Criteria/rubric	--criteria "<text>"	—	explicit success bar; loop stops when met
Max iterations	--max-iterations <N>	improveOutput.maxIterations	hard cap for converge/rubric loops; default 5
Source file	--file <path>	—	read the artifact from this path
Destination	--out <path> | --in-place	improveOutput.defaultDestination	chat | file; default resolved in Step 5
Lenses	—	improveOutput.lenses	subset of intent, completeness, clarity, concision, craft; default all

Stop-condition precedence: if --criteria is set, the rubric is the stop bar (loop until met or max hit). Else if --until-converged, loop until a cycle is a no-op or max hit. Else run exactly iterations cycles (default 1).

Step 2: Load Tone Preference

Mirror candid-review's tone loader exactly (see skills/candid-review/CONFIG.md).

Precedence: CLI (--harsh/--constructive) → project tone → user tone → interactive prompt.

If falling through, AskUserQuestion — Question: "Choose your critique style"

1. Harsh — Blunt about what's weak, vague, or padded. No hedging.
2. Constructive — Same honesty, explains why each rewrite is stronger and what it trades.

Output: Using [tone] tone (from [source]).

Step 3: Resolve the Target Output

In priority order:

1. --file <path> provided → read that file. Record source = file:<path>.
2. Inline text passed with the command → use it. Record source = inline.
3. Otherwise → the most recent substantive output in this session (the default). Identify it explicitly and record source = session.

If the target is ambiguous (e.g. several candidate outputs, or no clear recent one), ask the user which output to improve before proceeding. Never guess silently.

Echo what you locked onto: Improving: [one-line description of the artifact] (source: [file|inline|session]).

Step 4: Resolve Improvement Criteria

Assemble the bar for "better":

1. Explicit — --criteria "..." and/or a rubric the user gave.
2. Context — the user's prompt in this turn plus relevant session context (what the artifact is for, audience, constraints, length limits).
3. Inferred — if neither of the above pins it down, infer the goal from the current session and the artifact itself (the documented default). State your inferred goal in one line so the user can correct it.

Also classify the artifact type (copy / doc / answer / plan / prompt / other) — it selects which lenses matter most in Step 6.

Output: Goal: [criteria] (from [explicit|context|inferred]).

Step 5: Resolve Output Destination

Destination depends on the source (Step 3):

• Source was a file → default to writing back. Offer: overwrite in place (--in-place), a new file (--out <path>), or print to chat. Confirm before overwriting (destructive).
• Source was inline or session → default to printing the improved output to chat; offer to write to a new file.
• --out/--in-place/improveOutput.defaultDestination override the default without asking.

Record the resolved destination for Step 7.

Step 6: Run the Refine Loop

Initialize:

iteration = 0
current = target output (from Step 3)
history = [current]          # for oscillation checks

Loop:

WHILE not done:
    iteration++

    6.1 Critique pass — against the Step 4 goal, produce a short list of
        specific, actionable weaknesses. Use the active lenses (Step 1),
        adapted to the artifact type:
          🎯 Intent fit   — does it actually satisfy the goal / answer the ask?
          🧩 Completeness — missing pieces, unsupported claims, gaps?
          🔍 Clarity      — ambiguous, confusing, poorly ordered, jargon?
          ✂️ Concision    — padding, redundancy, filler, hedging?
          🎨 Craft        — tone, correctness, rhythm, polish for the medium
        Each point: one line naming the problem + where it is in the artifact.
        If the artifact already meets the goal and nothing rises above the
        noise floor → mark converged and break.

    6.2 Gate by mode:
          auto        → accept all critique points
          review-each → per-point Yes/No (offer "show the rewrite")
          interactive → per-point: Apply / Skip / Edit-the-goal / Stop-all

    6.3 Refine pass — rewrite `current` into an improved version that addresses
        the accepted points. Change only what the critique justifies; preserve
        the artifact's intent, voice, and any correct content.

    6.4 Show this iteration: the critique points, then a before→after preview
        (full rewrite if short; a diff/section-level view if long).

    6.5 Set current = refined output; append to history.

    6.6 Stop check (see Invariants): stop when the rubric is met, iterations are
        exhausted, the cycle converged, no progress was made, or max-iterations
        is hit.

Loop Invariants — do not violate

1. Convergence requires a fresh pass. Declare "converged/done" only after a critique pass that surfaced nothing meaningful (or the refine produced only trivial change). Never infer convergence from an earlier iteration.
2. No progress → stop. If a cycle accepts nothing (or the rewrite is a no-op) and the goal is unmet, stop and report — repeating the identical critique cannot converge.
3. Oscillation check. If a refined output matches an earlier entry in history, halt: Oscillation detected — output reverted to iteration [k]. Surface both versions for the user to choose.
4. Respect the cap. --max-iterations (default 5) is a hard ceiling for converge/rubric loops. If hit with the goal unmet, stop and report INCOMPLETE.
5. Single pass by default. With no --criteria, --until-converged, or --iterations, run exactly one cycle and stop.

Step 7: Emit Result

1. Deliver current to the destination from Step 5:
   • chat → print the final improved output in a fenced block.
   • file → write it; confirm the path (and that a backup/original is preserved when not overwriting).
2. Summary: [N] iteration(s) · stop reason: [rubric met | converged | iterations done | no progress | max reached] followed by a 1–3 line note on what changed across the run.

Step 8: Save State

mkdir -p .candid

Write .candid/last-improve-output.json:

{
  "timestamp": "ISO timestamp",
  "skill": "candid-improve",
  "source": "file:<path> | inline | session",
  "goal": "resolved criteria",
  "iterations": 2,
  "stopReason": "converged",
  "destination": "chat | file:<path>"
}

Output: Improvement state saved to .candid/last-improve-output.json.

Note: this file is user-specific state and belongs in .gitignore (separate from candid-improve-implementation's .candid/last-improve.json).

---

Output Structure

Per iteration, in order:

1. Critique — the active-lens points (🎯/🧩/🔍/✂️/🎨), one line each.
2. Rewrite — before→after preview.

After the loop: 3. Final output — delivered to the destination. 4. Summary — iterations + stop reason + what changed.

In review-each/interactive modes, the per-point gate (Step 6.2) sits between Critique and Rewrite.

---

Examples

/candid-improve                                  # refine the last session output, single pass, auto
/candid-improve --file README.md --iterations 2  # two cycles on a file
/candid-improve --until-converged --criteria "punchier, under 120 words, active voice"
/candid-improve --mode interactive --file pitch.md
/candid-improve --harsh --criteria "no marketing fluff, concrete claims only"

Remember

The user already has an output — they want the next version of it, aimed at their goal. Be specific (every critique point names a problem and where), honest about what each rewrite trades, and restrained (fix what the goal justifies, not everything you could touch). Default to one pass unless the user asked to loop. Harsh: name the weak, vague, and padded parts directly. Constructive: same honesty, explain why each rewrite is stronger.