atomr-agents-hitl

name	atomr-agents-hitl
description	Use when adding human-in-the-loop pause/resume — dynamic `interrupt()` from a step, static breakpoints (`interrupt_before` / `interrupt_after`), or driving resume with `Command::{Continue, Resume, Update, Goto}`. Triggers on writing `Interruptible { ... }`, calling `ctrl.interrupt(...)`, or porting a LangGraph `interrupt()` / `Command(resume=...)` flow.

Human-in-the-loop in atomr-agents

Interruptible extends the stateful workflow runner with three HITL primitives: dynamic interrupt() from inside a step, static breakpoints on named steps, and a Command resume API. All three ride on the Checkpointer from agents-state.

Mental model

• Dynamic interrupt. A step calls ctrl.interrupt(step_id, Some(payload)) and returns. The runner persists a special checkpoint labelled interrupt:<step> and returns RunOutcome::Paused.
• Static breakpoints. Interruptible::interrupt_before / _after is a HashSet<StepId>. Hitting one persists a before:<step> / after:<step> checkpoint and returns RunOutcome::Paused.
• Resume. Caller invokes Interruptible::resume(command). On resume, the runner disables the next breakpoint hit so a static Before doesn't immediately re-fire.

Dynamic interrupt

use std::sync::Arc;
use std::collections::HashSet;
use atomr_agents_workflow::{
    Command, FnInterruptStep, InterruptCtrl, Interruptible, InterruptibleStep, RunOutcome,
    Dag, StepId,
};
use atomr_agents_state::{InMemoryCheckpointer, LastWriteWins, RunState, StateSchema};
use atomr_agents_core::{RunId, WorkflowId};

let schema = Arc::new(
    StateSchema::builder()
        .add("approved", LastWriteWins)
        .build(),
);

let approve_step: Arc<dyn InterruptibleStep> = Arc::new(FnInterruptStep(
    |_state: &RunState, ctrl: &InterruptCtrl| {
        let ctrl = ctrl.clone();
        async move {
            // On resume, the value passed to Command::Resume(...) shows up here.
            if let Some(approval) = ctrl.take_resume_value() {
                return Ok(vec![("approved".into(), approval)]);
            }
            ctrl.interrupt(
                StepId::new("approve"),
                Some(serde_json::json!({"prompt": "Approve $5,000 transfer?"})),
            );
            Ok(vec![])  // returns empty; the runner persists the pause
        }
    },
));

let dag: Dag<Arc<dyn InterruptibleStep>> = Dag::builder("approve")
    .step("approve", approve_step)
    .build();

let runner = Interruptible {
    workflow_id: WorkflowId::from("wf"),
    run_id:      RunId::from("run-1"),
    dag,
    schema,
    checkpointer: Arc::new(InMemoryCheckpointer::new()),
    interrupt_before: HashSet::new(),
    interrupt_after:  HashSet::new(),
};

match runner.run().await? {
    RunOutcome::Paused { reason, payload, .. } => {
        // Show payload to a human, get their answer …
        let approved = serde_json::json!(true);
        let RunOutcome::Done(state) = runner.resume(Command::Resume(approved)).await? else {
            unreachable!();
        };
        assert_eq!(state.read("approved"), &serde_json::json!(true));
    }
    RunOutcome::Done(_) => unreachable!("we requested a pause"),
}

Static breakpoints

For pauses that don't require the step to know about them (step-debugging, approval gates):

let mut before = HashSet::new();
before.insert(StepId::new("spend_money"));

let runner = Interruptible {
    /* ... */
    interrupt_before: before,
    interrupt_after:  HashSet::new(),
};

The runner pauses before spend_money runs in its super-step. interrupt_after pauses immediately after the named step completes.

The Command resume API

pub enum Command {
    Continue,                           // resume with no edits
    Resume(Value),                      // resume; injects value into ctrl.take_resume_value()
    Update(Vec<(String, Value)>),       // edit channels via reducers, then resume
    Goto(StepId),                       // jump to a specific step on resume
}

Use cases:

UX	Command
Approve	Command::Continue
Approve with payload	Command::Resume(serde_json::json!(true))
Edit + continue	Command::Update(vec![("config".into(), serde_json::json!(...))])
Reject + retry	Command::Update(vec![/* reset */]) followed by Command::Goto(retry_step)

Command::Update writes go through the channel reducers (so e.g. an AppendMessages channel still dedupes by id when you inject new messages mid-flight).

Resume disables next breakpoint

Interruptible::resume(...) always sets a one-shot skip_breakpoints_once flag so a static Before breakpoint doesn't immediately re-fire on resume. Without this, Command::Continue would loop forever on the same breakpoint.

Dynamic interrupts don't loop because the step itself reads ctrl.take_resume_value() and skips the interrupt(...) call on the resume path (your step code is responsible for this — see the approve_step example above).

Combining with checkpointer fork

Command::Update performs an in-place edit. To create a divergent run instead (so the original paused run is preserved), call Checkpointer::fork(checkpoint_key, edits) directly, then run a new Interruptible keyed on the new RunId:

let new_run = cpt.fork(
    &CheckpointKey {
        workflow_id: "wf".into(),
        run_id: "run-1".into(),
        super_step: 0,           // pause persisted at super_step before "approve"
    },
    vec![("approved".into(), serde_json::json!(false))],
).await?;

let alt_runner = Interruptible {
    run_id: new_run,
    /* same dag/schema/cpt */
    ..runner_template
};
let _ = alt_runner.run().await?;

Canonical references

• docs/workflows-and-hitl.md
• docs/state-and-checkpointing.md
• crates/workflow/src/interrupt.rs

Common mistakes

• Forgetting take_resume_value() in the step. Without it the step pauses, resumes, pauses again — infinite loop.
• Using Command::Continue after a dynamic interrupt that expects a value. The step's take_resume_value() returns None; it'll re-pause. Use Command::Resume(Value::Null) to resume without injecting data.
• Resuming from a different RunId. Resume re-reads from the checkpointer keyed on (workflow_id, run_id). Wrong id → no checkpoint found → error.
• Forgetting to disable static breakpoints when iterating. They pause every time the corresponding super-step is reached. Drop them from the interrupt_before/_after sets when you're done debugging.
• Command::Goto to a step in a finished super-step. The runner skips already-completed super-steps. Use fork if you need to rewind.