원클릭으로 Manus에서 모든 스킬 실행

hpc-calculix

스타67

포크8

업데이트2026년 3월 16일 15:31

Build, review, debug, and automate CalculiX finite-element workflows. Use when working with CalculiX `.inp` decks, Abaqus-style keywords, materials, steps, contacts, boundary conditions, static or frequency analyses, or CalculiX solve and post-processing issues.

설치

Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.

Manus에서 실행

출처

SciMate-AI

SciMate-AI/HPC-Skills

GitHub 저장소 열기 Creator 저장소 보기

다운로드

Manus에서 실행

HPC CalculiX

Treat CalculiX as an input-deck-driven FEM workflow centered on .inp keywords.

Start

Read references/input-deck-manual.md before creating or editing a .inp file.
Read references/keyword-and-step-matrix.md when mapping materials, sections, loads, and analysis steps.
Read references/mesh-boundary-and-output.md when working with nodes, elements, sets, boundary conditions, and result output.
Read references/cluster-execution-playbook.md when staging a CalculiX deck for scheduler-backed cluster execution.
Read references/error-recovery.md when parsing, solving, or post-processing fails.

Additional References

Load these on demand:

references/time-control-and-amplitudes.md for step time, amplitude logic, and incremental loading behavior
references/result-files-and-postprocessing.md for .dat, .frd, and eigenmode artifacts
references/thermal-and-coupled-procedures.md for heat transfer and coupled analysis patterns
references/step-load-output-matrix.md for procedure-to-load-to-output compatibility tables
references/element-section-material-matrix.md for element, section, and material assignment lookup tables
references/error-pattern-dictionary.md for structured parse, singularity, and procedure-mismatch failure signatures
references/cluster-execution-playbook.md for launch style, result-artifact planning, and cluster-side deck execution

Reusable Templates

Use assets/templates/ when a concrete .inp scaffold is needed, especially:

static_minimal.inp
frequency_minimal.inp
thermal_minimal.inp
beam_static.inp
calculix-ccx-slurm.sh

Guardrails

Do not invent Abaqus-style keywords that CalculiX does not support.
Do not mix node or element set names inconsistently across sections and steps.
Do not define loads and boundary conditions without checking the active step type.
Do not skip material and section coherence when the deck fails later in the solve.

Outputs

Summarize:

analysis type
materials and sections
sets and boundary assumptions
step sequence
expected result files

이 저장소의 다른 Skills

같은 저장소

hpc-ls-dyna

SciMate-AI/HPC-Skills

Create, review, debug, and recover LS-DYNA keyword decks and simulation workflows. Use when working with LS-DYNA `*.k` or `*.key` input files, include trees, explicit crash or impact models, implicit static or quasi-static solves, contact definitions, section and material selection, timestep or mass-scaling control, hourglass stabilization, thermal or coupled workflows, ALE/SPH/ICFD/EM/DEM/CESE/IGA cases, or LS-DYNA runtime instability and model-quality issues.

2026-04-0667

hpc-gmsh

SciMate-AI/HPC-Skills

Build, review, debug, and automate Gmsh geometry and meshing workflows. Use when working with `.geo` scripts, the Gmsh Python API, GEO versus OpenCASCADE modeling, physical groups, mesh-size fields, transfinite or recombine options, boundary layers, structured/unstructured algorithm selection, mesh partitioning, periodic meshes, high-order elements, mesh export and solver handoff (FEniCS, OpenFOAM, Elmer, SU2, etc.), CAD/STL import, or Gmsh CLI and meshing failures.

2026-04-0467

hpc-openfoam

SciMate-AI/HPC-Skills

Generate, review, debug, and recover OpenFOAM case files for CFD workflows. Use when working with OpenFOAM dictionaries, case structure, turbulence fields, boundary conditions, decomposition, numerics, or OpenFOAM runtime errors. Also covers RANS/LES turbulence setup, wall functions, y+ targeting, conjugate heat transfer, compressible flows, VOF multiphase, mesh quality, and scheme tuning.

2026-04-0467

hpc-vasp

SciMate-AI/HPC-Skills

Build, review, debug, and automate VASP first-principles workflows. Use when working with VASP input sets such as INCAR, POSCAR, KPOINTS, and POTCAR; when choosing SCF, relaxation, static, DOS, or band-structure stages; or when fixing convergence, symmetry, cutoff, and k-point issues. Also covers magnetic calculations, spin-orbit coupling, hybrid functionals, surface slabs, DFT+U, van der Waals, phonons, molecular dynamics, NEB, and defect calculations.

2026-04-0467

hpc-foundations

SciMate-AI/HPC-Skills

Navigate foundational HPC knowledge across concepts, architectures, schedulers, Linux usage, storage and RDMA, containers, cloud basics, and cluster administration patterns distilled from hpclib.com. Use when the task is about understanding or explaining HPC basics, Slurm or PBS or LSF concepts, Linux-on-cluster workflows, software environment setup, storage or network fundamentals, or when turning general HPC knowledge into future skills.

2026-04-0167

hpc-gpu-stack

SciMate-AI/HPC-Skills

Build, review, debug, and launch CUDA- and GPU-accelerated HPC workflows. Use when working with `nvcc`, host-compiler compatibility, CUDA-aware MPI, rank-to-GPU mapping, `CUDA_VISIBLE_DEVICES`, Slurm GPU scheduling, GPU memory or stream behavior, or CUDA build and runtime failures.

2026-04-0167

name	hpc-calculix
description	Build, review, debug, and automate CalculiX finite-element workflows. Use when working with CalculiX `.inp` decks, Abaqus-style keywords, materials, steps, contacts, boundary conditions, static or frequency analyses, or CalculiX solve and post-processing issues.

HPC CalculiX

Treat CalculiX as an input-deck-driven FEM workflow centered on .inp keywords.

Start

Read references/input-deck-manual.md before creating or editing a .inp file.
Read references/keyword-and-step-matrix.md when mapping materials, sections, loads, and analysis steps.
Read references/mesh-boundary-and-output.md when working with nodes, elements, sets, boundary conditions, and result output.
Read references/cluster-execution-playbook.md when staging a CalculiX deck for scheduler-backed cluster execution.
Read references/error-recovery.md when parsing, solving, or post-processing fails.

Additional References

Load these on demand:

references/time-control-and-amplitudes.md for step time, amplitude logic, and incremental loading behavior
references/result-files-and-postprocessing.md for .dat, .frd, and eigenmode artifacts
references/thermal-and-coupled-procedures.md for heat transfer and coupled analysis patterns
references/step-load-output-matrix.md for procedure-to-load-to-output compatibility tables
references/element-section-material-matrix.md for element, section, and material assignment lookup tables
references/error-pattern-dictionary.md for structured parse, singularity, and procedure-mismatch failure signatures
references/cluster-execution-playbook.md for launch style, result-artifact planning, and cluster-side deck execution

Reusable Templates

Use assets/templates/ when a concrete .inp scaffold is needed, especially:

static_minimal.inp
frequency_minimal.inp
thermal_minimal.inp
beam_static.inp
calculix-ccx-slurm.sh

Guardrails

Do not invent Abaqus-style keywords that CalculiX does not support.
Do not mix node or element set names inconsistently across sections and steps.
Do not define loads and boundary conditions without checking the active step type.
Do not skip material and section coherence when the deck fails later in the solve.

Outputs

Summarize:

analysis type
materials and sections
sets and boundary assumptions
step sequence
expected result files