| name | ucoz-provisioning-skill |
| description | Agent skill for preparing a uCoz site for work via MCP: create a new site or configure an existing one, ask clarifying questions for the scenario, choose available domain zones and site theme presets from the live uCoz interface, enable required modules, create/reuse uAPI and FTP credentials, assemble the official ucoz-mcp configuration, verify access, and hand off control to downstream task skills.
|
| version | 1.1 |
| author | uCoz / Hermes Agent |
| license | MIT |
| requires | ["browser automation capability for site provisioning via the uCoz web interface",{"recommended":"node >= 18"},{"recommended":"playwright"},"official ucoz-mcp for MCP operations"] |
| metadata | {"tags":["ucoz","mcp","provisioning","helper","onboarding","portable-skill"],"hermes":{"tags":["ucoz","mcp","provisioning","onboarding","website-builder"]},"compatible_agents":["Hermes","Claude Desktop","Cursor","Codex","OpenAI Agents","OpenWebUI","generic MCP clients"],"required_mcp_servers":["ucoz-mcp"],"downstream_skills":[]} |
uCoz Site Launch and MCP Connection Assistant (uCoz MCP Launch Assistant)
Purpose
This is a portable agent skill for preparing a uCoz site so that any MCP-capable agent can work with it through the official ucoz-mcp server.
The skill is intentionally a provisioning/preparation helper layer, not a content or page layout skill. It finishes when the site is ready, MCP credentials are collected, and the agent can hand the task off to the next task skill.
Runtime Requirements
The provisioning scenario requires an agent environment with browser automation capability, because the agent must interact with the live uCoz web interface: site creation, domain zone discovery, theme/configuration cards, module enablement, uAPI and FTP setup.
Recommended stack:
node >= 18
playwright
Similar browser automation tools also work if they can read the live DOM, click elements, submit forms, and read page state.
The official ucoz-mcp server remains the required MCP execution layer after credentials are prepared. Browser automation is for onboarding/provisioning; MCP is for operations on the connected site.
Mandatory Execution: New Site via Browser
Order without exceptions: first chat dialog (clarify and confirm agreement on each parameter), then write to environment variables and run the runner. Do not silently substitute a preset, address, or arbitrary UCOZ_ORIGIN based on guesswork alone.
What the agent must clarify in chat (new site)
- uCoz account login email (can be provided as plain text — it is not a password secret).
- Account password: the agent does not replay the secret from history unless necessary; then one of two paths — the user sets the password locally in ENV/.env or explicitly passes it to the agent for local write to
.env (without publishing the secret in package files/commits).
- New site address: full
prefix.zone string or prefix and desired zone separately — and confirmation before launch.
- Site theme/configuration card is chosen from the live uCoz interface.
browser-runner/preset-catalog.json is advisory/fallback only for aliases and debugging. Do not choose "Landing" or any other preset by default; if the user asks for a theme not in the live UI, say so explicitly and ask them to choose from the visible list.
- Site name in the modal:
UCOZ_SITE_TITLE, if the prefix alone is not enough.
- If needed: non-default
UCOZ_ORIGIN, UCOZ_HEADLESS mode.
After answers, the agent briefly summarizes the agreed configuration in chat (without password or tokens).
Moving agreed values to ENV/.env
The agent offers 2 options:
- The user sets ENV/
.env themselves ($env:... commands or filling browser-runner/.env).
- The user passes values in chat, and the agent fills
.env itself.
Passwords and tokens are not printed in user summaries and are not committed to the repository.
After that: working directory browser-runner/, then npm run provision.
Once parameters are agreed in chat and reflected in ENV, the agent runs the built-in Playwright runner from this package and completes the web chain end to end (login → /createsite → presets → panel) per references/browser-runner.md and references/NEW_SITE_WORKFLOW.md.
- Working directory:
browser-runner/ inside this skill package.
- Secrets: values for
UCOZ_PASSWORD, uAPI tokens, FTP passwords — only in the user's local environment or MCP secrets; do not paste into chat messages or commit to git.
- Commands (install dependencies once locally before first use — not at agent runtime):
cd browser-runner && npm install && npx playwright install chromium
npm run provision
- Runner result: site URL (
UCOZ_SITE_URL=) and file browser-runner/out/provision-site-created.json; then skill steps: modules (with explicit user confirmation), uAPI, FTP, MCP config, verification.
If the platform changed markup and the runner fails, the agent first fixes browser-runner/ucoz-provision.cjs/selectors or opens a ticket to update the package, then if needed offers a manual workaround only as an exception.
Scope
The skill covers:
- Creating a new uCoz site.
- Connecting/configuring an existing uCoz site.
- Asking necessary clarifying questions.
- Reading available domain zones from the live uCoz interface.
- Reading available site theme/configuration cards from the live uCoz interface.
- Asking which modules to enable before uAPI/FTP setup.
- Creating or reusing a uAPI key.
- Setting up or reusing FTP credentials.
- Assembling configuration for the official
ucoz-mcp server.
- Verifying readiness and handing off to downstream skills.
The skill does not include downstream scenarios: site design, page content, shop, blog, user management, form builder. Those belong to separate skills.
Execution Stack
User request
↓
ucoz-site-provision-helper
↓
official ucoz-mcp server
↓
downstream skills: site design, shop, blog, users, forms, etc.
Use the official MCP server:
npx -y ucoz-mcp@latest
Required environment variables for ucoz-mcp:
UCOZ_API_TOKEN
UCOZ_SITE_URL
UCOZ_FTP_HOST
UCOZ_FTP_USER
UCOZ_FTP_PASS
Downstream Skill Registry
Agents can maintain a registry in manifest.json, agent configuration, or this skill's frontmatter.
Recommended structure:
{
"downstream_skills": [
{
"name": "ucoz-task-skill-name",
"trigger": "Which user request should hand off control to this skill",
"requires_modules": ["module_key_or_human_name"],
"handoff_after": "MCP credentials configured and verified"
}
]
}
When provisioning is complete, assess the user's next goal and connect or invoke the appropriate downstream skill. If none exists — stop and tell the user the site is ready for MCP work.
Optional downstream handoff
After MCP provisioning, you may suggest the next step only based on the user's request context: landing, news, shop, users, forms, or another downstream skill. The helper itself does not require or include a downstream skill by default; the registry is empty until explicitly configured.
Scenario Routing
At the start, classify the request:
| Scenario | Typical user request | Required clarifications |
|---|
| New site, address not set | "Create a new uCoz site" | Ask for desired address prefix, then fetch domain zones from uCoz and offer the user a choice |
| New site, address set | "Create example.ucoz.net" | Confirm recognized prefix and zone; verify in the live interface that the zone is available |
| Existing site | "Connect my existing uCoz site" | Clarify/confirm site URL and account credentials |
| Credentials only | "Prepare MCP credentials" | Clarify whether a site already exists; if "yes" — existing site scenario |
| Downstream task first | "Build me a shop/blog/company site" | Explain that site provisioning comes first; then hand off to the next skill |
If ambiguous, ask one routing question:
Create a new uCoz site or connect an existing one?
Mandatory Questions
Common first step
Before protected actions, request in chat everything needed for the scenario (see "What the agent must clarify" above for a new site, and similarly for existing — site URL). After agreement, translate decisions into environment variables (commands for the user's PowerShell/shell) before running the runner or manual panel login.
To prepare the site, access to the uCoz account is required:
1. uCoz account email — clarify and confirm in chat
2. Password — do not duplicate in logs; agree on one of two paths: user sets `UCOZ_PASSWORD` locally (ENV/`.env`) or passes it to the agent for local write to `.env` (without exposing the secret in a public response)
For an existing site, also ask:
Send the URL of the existing uCoz site to connect.
New site without address
If the user asks for a new site but did not specify an address:
What site address do you want?
Specify the desired prefix, for example `my-project`.
I will check the currently available uCoz domain zones and offer you a choice.
Then log into the account, open the site creation interface, read all available domain zones from the live selector, and show them to the user.
Do not assume there is only the .ucoz.net zone. Do not generate a random "production" address unless the user explicitly said this is test/development and a random address is acceptable.
Domain zone selection
Read domain zones from the live uCoz interface, usually from select#domains[name="dom"] or the current equivalent.
Ask:
Available uCoz domain zones: <zones>. Which to use for `<prefix>`?
If prefix+zone is taken — ask for another prefix or zone.
Site theme/configuration card
For the runner browser-runner/ucoz-provision.cjs (and the provision-new-site.mjs layer), the fixed preset list and synonyms live in browser-runner/preset-catalog.json — the agent matches the user's request against this file before launch and on mismatch explicitly reports that the theme is not in the list (the runner also prints the list when UCOZ_PRESET_STRICT=1). For a purely manual panel walkthrough, still rely on live cards on screen.
After the address is accepted, when the interface shows site setup cards:
- Read all visible cards/presets in the current interface.
- Extract visible title, internal key/id if present, description, and listed modules if shown.
- Ask the user to choose from the current list.
Template:
I see these site configurations: <cards>. Which one to choose?
Do not hardcode card order. Do not choose automatically unless the user's goal unambiguously matches one visible card.
Site name
If the chosen card requires a site name:
What site name should be set in the control panel?
If the user already named the project or company — suggest it, but ask for confirmation.
Module enablement before uAPI/FTP
After the site is created and before uAPI/FTP:
Which modules to enable before uAPI and FTP setup?
I can review available modules and suggest a minimal set for your next task.
Rules:
- Get the module list via MCP:
modules_tool → modules_list (fields active, api_enabled). This replaces manual browser scraping of /panel/?a=allmod.
- If the next skill is known — read its
requires_modules and suggest those modules.
- If the next skill is unknown — ask the user to choose or pick a minimal configuration.
- Do not enable modules silently.
- Confirm enablement before changing site state.
- Activate via MCP:
modules_tool → module_install. Check status via module_status.
uAPI setup
After the module decision:
- Open the uAPI page in the site panel.
- Enable uAPI access for modules via MCP:
modules_tool → module_enable_uapi (with user confirmation). Fallback: if MCP returns an error — open /panel/?a=uapi in the browser and enable checkboxes manually on that page only.
- Create a uAPI key only if no suitable one exists or the user asks for a new one.
- Use a human-readable key name tied to the task, e.g. "MCP site connection" or "Agent integration".
- REQUIRED when creating a key: enable the "API access to control panel settings" switch (
input#adv_switcher[name="allow_cp_settings"]). Without it the key will not get access to panel settings and modules. In the POST form this field is allow_cp_settings=on. Via browser: ensure the checkbox is checked (background-color: var(--panel7-blue-550)) before clicking "Add".
- Prefer extracting the full token from raw DOM/HTML, e.g.
data-copy="sk_live_..." attributes, when the interface visually masks the value.
- Do not delete or reissue existing keys without explicit confirmation.
CRITICAL — "User" field when creating a uAPI key:
The uAPI key creation form has a user field. It must be filled with the login of an already existing site user with ID=1 (owner/primary administrator).
The login is read from /panel/?a=users&l=find — first table row where the first cell contains 1.
NEVER create a new user in the control panel just to obtain a login for uAPI.
Creating a new user for this purpose is an error: such a user is not an administrator and the key will have insufficient permissions.
FTP setup
After uAPI:
- Get FTP connection parameters via MCP:
ftp_tool → ftp_password_get. Returns host and login; password is not exposed.
- If password is not set yet — set via
ftp_tool → ftp_password_set. Follow uCoz limits: 6–15 characters, Latin letters, digits, _, -.
- If password is already set — do not overwrite by default. Ask whether to use existing credentials or change via
ftp_password_change.
- If a full reset is needed —
ftp_password_reset (only with explicit confirmation).
- Warn that changing the FTP password may break existing FTP clients/integrations.
Additional module activation after keys/FTP
After uAPI and FTP setup, ask a control question:
Do you need to additionally activate any modules (e.g. "Mail forms", "Video")?
If yes:
- Activate via MCP:
modules_tool → module_install (only after explicit confirmation).
- Verify via
module_status — module must have active: true.
- Enable uAPI access for activated modules:
modules_tool → module_enable_uapi (only with confirmation). Fallback: if MCP returns an error — open /panel/?a=uapi in the browser and enable checkboxes manually on that page.
MCP configuration and mandatory server switch
Assemble configuration for the official MCP server and immediately update the server entry in the agent config (mcp.json / cursor-mcp.json / MCP environment variables).
CRITICAL: After obtaining the uAPI key — before any call to ftp_tool, modules_tool, or any other MCP tool — update the MCP server config, otherwise tools will use credentials from the previous site. Calling MCP tools without switching config is a common mistake that returns data from the wrong site.
Action order:
- After obtaining
sk_live_... from the runner or panel — immediately update mcp.json:
UCOZ_API_TOKEN = new tokenUCOZ_SITE_URL = new site URLUCOZ_FTP_HOST, UCOZ_FTP_USER, UCOZ_FTP_PASS — fill on the next step
- Restart the MCP server (if the agent keeps it running).
- Only after that call
ftp_tool → ftp_password_get / ftp_password_set — they will return data for the new site.
Example mcp.json:
{
"mcpServers": {
"ucoz": {
"command": "npx",
"args": ["-y", "ucoz-mcp@latest"],
"env": {
"UCOZ_API_TOKEN": "<new site sk_live_token>",
"UCOZ_SITE_URL": "https://example.ucoz.net/",
"UCOZ_FTP_HOST": "<from ftp_password_get>",
"UCOZ_FTP_USER": "<from ftp_password_get>",
"UCOZ_FTP_PASS": "<set via ftp_password_set>"
}
}
}
}
Agent-specific templates are in the templates/ directory.
Verification
Verify in layers:
- Public site URL opens.
- Admin panel opens.
- Requested modules are active — check via
modules_tool → module_status.
- uAPI key exists, token saved.
- FTP parameters obtained via
ftp_tool → ftp_password_get; password set/confirmed.
- MCP config assembled.
- If MCP is already connected to the current agent — call a safe read/list method.
- Final step — quarantine: call
modules_tool → quarantine_status. If the site is under quarantine, offer the user to remove it via quarantine_unlock, explaining: "The site is currently closed to search engine indexing. Remove quarantine so it starts indexing?" Execute only with explicit consent.
Final Response Format
Return a brief masked summary:
Done: uCoz site prepared for MCP.
Site: https://example.ucoz.net/
Scenario: new | existing
Site configuration: <chosen card>
Enabled modules: <list>
uAPI: created/reused existing, sk_live_***abcd
FTP: configured/reused existing, user=<ftp user>, host=<host>
MCP config: assembled/written
Verification: <passed checks>
Next: <downstream skill or question to user>
Never include in chat, screenshots, examples, or public package files: raw passwords, full API tokens, browser auth artifacts.
Common Mistakes
- Assuming the only domain zone is
.ucoz.net.
- Assuming theme/configuration card order is fixed.
- Enabling modules without explicit consent.
- Setting up uAPI/FTP before the module decision.
- Reissuing uAPI keys by default.
- Overwriting FTP password without confirmation.
- Mixing site provisioning with downstream "site building" tasks.
- Printing secrets in user output or public examples.
- Treating this skill as the MCP server; it is a workflow layer over official
ucoz-mcp.
- Suggesting a theme like "Blog" without checking
preset-catalog.json / live screen — if the card is missing, say so explicitly, do not stay silent or substitute another preset without discussion.
- Trying to "create a site" again at an address already in "My sites" for the same account — need a different free prefix or log into the existing site from the list.
- Creating a new user in the control panel to bind a uAPI key. The uAPI form
user field must contain the login of existing user ID=1 — read from /panel/?a=users&l=find, do not register a new user.
- Creating a uAPI key without enabling the
allow_cp_settings switch. Without this flag the key has no access to panel settings and modules — MCP integration will not work.
- Calling MCP tools (
ftp_tool, modules_tool, etc.) before updating the MCP server config. After obtaining a new uAPI key, write it to mcp.json and restart the server first — otherwise tools return data from the previous site, not the new one.
- Not updating
UCOZ_FTP_HOST / UCOZ_FTP_USER in config after ftp_password_get. The real FTP host and login come from ftp_password_get (they differ from the site domain name), so the config must include these values before handing off to downstream skills.
- Using
waitForNavigation after clicking "Create site" on /createsite. uCoz does not do a full redirect — content updates via JavaScript. After click wait for [data-preset-id] via waitForSelector, not waitForNavigation. Click the submit button with { force: true } to bypass possible overlays.
Panel Auth Rule
- Before entering a newly created or existing site panel, inspect the live admin login page.
- If the page shows a regular password form, log in through that form first.
- Separate panel password: the
/admin/ page may require a password different from the uCoz account password — older sites may have a separate control panel password set in site settings. If after submitting the form the page stays on the gate or shows an error ("Wrong password", etc.) — do not retry the same password. Immediately ask the user: "Login to panel /admin/ did not accept the uCoz account password. This site may have a separate panel password. Provide the control panel password." Obtain it as PANEL_PASSWORD and try again.
- If the page shows a
uID button/link instead of a regular form, follow the uID flow and sign in there with the same confirmed credentials.
- Do not hardcode only one panel-login method; choose the branch from the page state.
Phone Popup Rule
- If the site panel shows the phone-confirmation popup (
#ucoz_phone_popup), close it before clicking module actions, save buttons, or setup controls.
- Prefer the page's own close handler such as
closePhonePopup() when it exists; fall back to removing the popup only if needed.
- Re-check for this popup after panel navigation, because it can reappear and block pointer events.
