원클릭으로 Manus에서 모든 스킬 실행

cad-modeling

Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.

Manus에서 실행

개요

Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.

설치 명령

npx skills add https://github.com/00000star/AGI_engineering_forge --skill cad-modeling

이 명령을 Claude Code에 복사하여 붙여넣어 스킬을 설치하세요

출처

00000star/AGI_engineering_forge

스타0

포크0

업데이트2026년 3월 26일 19:32

SKILL.md

readonly

name	cad-modeling
description	Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.
metadata	{"openclaw":{"emoji":"📐","requires":{"anyBins":["python3"]}}}

CAD Modeling with OpenSCAD

Generate parametric 3D geometry from code. Produces .scad files (and .stl if OpenSCAD binary is installed).

Usage

python3 /workspace/bridge.py openscad '
// Parametric bracket
thickness = 5;
width = 30;
height = 40;
hole_d = 6;

difference() {
    cube([width, thickness, height]);
    translate([width/2, -1, height - 15])
        rotate([-90, 0, 0])
            cylinder(h=thickness+2, d=hole_d, $fn=32);
}
'

Best Practices

Always parameterize dimensions (no magic numbers)
Use $fn=32 or higher for smooth curves
Comment design intent
Export to STEP/STL when manufacturing
Use module for reusable components

이 저장소의 다른 Skills

같은 저장소

circuit-design

00000star/AGI_engineering_forge

Analytical circuit design and simulation — voltage dividers, RC/RL/RLC filters, power calculations, impedance analysis, transfer functions. Uses sympy for symbolic analysis and numpy for numerical.

2026-03-260

flight-controls

00000star/AGI_engineering_forge

Design and simulate control systems — transfer functions, PID controllers, Bode plots, root locus, stability analysis, state-space modeling. Uses scipy.signal and sympy.

2026-03-260

forge-engineering

00000star/AGI_engineering_forge

Run a complete engineering project through Forge's 8-phase autonomous pipeline. Decomposes any idea into subsystems, assigns specialist agents, produces real artifacts (CAD, firmware, schematics, BOMs), and iterates until the design works.

2026-03-260

structural-analysis

00000star/AGI_engineering_forge

Perform real structural engineering calculations — beam deflection, stress analysis, buckling, safety factors. Uses numpy and scipy with built-in helper functions.

2026-03-260

tool-fabricator

00000star/AGI_engineering_forge

When no existing engineering tool fits the problem, the fabricator creates a new one from scratch. Designs, writes, tests, and registers new computational tools at runtime. This is the AGI capability.

2026-03-260

출처

00000star

00000star/AGI_engineering_forge

GitHub 저장소 열기 Creator 저장소 보기

설치 명령

다운로드

Manus에서 실행

유용한 대상SOC

소프트웨어 개발자컴퓨터 및 수학직15-1252L4

name	cad-modeling
description	Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.
metadata	{"openclaw":{"emoji":"📐","requires":{"anyBins":["python3"]}}}

CAD Modeling with OpenSCAD

Generate parametric 3D geometry from code. Produces .scad files (and .stl if OpenSCAD binary is installed).

Usage

python3 /workspace/bridge.py openscad '
// Parametric bracket
thickness = 5;
width = 30;
height = 40;
hole_d = 6;

difference() {
    cube([width, thickness, height]);
    translate([width/2, -1, height - 15])
        rotate([-90, 0, 0])
            cylinder(h=thickness+2, d=hole_d, $fn=32);
}
'

Best Practices

Always parameterize dimensions (no magic numbers)
Use $fn=32 or higher for smooth curves
Comment design intent
Export to STEP/STL when manufacturing
Use module for reusable components