원클릭으로 Manus에서 모든 스킬 실행

$pwd:

opentrade-wallet

Name: Opentrade Wallet
Author: 6551Team

// This skill should be used when the user asks to 'create a custodial wallet', 'create a managed wallet', 'get my wallet address', 'show my custodial account', 'custodial swap', 'swap with managed wallet', 'withdraw from custodial wallet', 'withdraw BNB', 'withdraw SOL', 'send native tokens from custodial wallet', or mentions creating, managing, swapping, or withdrawing with a custodial (managed/hosted) wallet. Only supports BSC and Solana networks. Do NOT use for non-custodial wallet operations, general balance queries (use opentrade-portfolio), or swap quotes without custodial execution (use opentrade-dex-swap).

Manus에서 실행

$ git log --oneline --stat

stars:5

forks:0

updated:2026년 4월 17일 20:07

SKILL.md

readonly

related-skills.json

같은 저장소

opentrade-cex.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'place a CEX order', 'trade on centralized exchange', 'buy BTC on CEX', 'sell ETH futures', 'open a long position', 'open a short position', 'close my position', 'set leverage', 'check my CEX balance', 'show my open orders', 'cancel my order', 'check CEX ticker', 'get K-line data', 'set margin mode', 'check my CEX positions', 'view trade history', 'check funding rate', 'get order book', 'check open interest', 'compare funding rates', or mentions CEX trading, futures, contracts, leverage, margin, limit orders, market orders, stop-loss, take-profit, funding rate, order book, open interest. This is for centralized exchange operations only. Do NOT use for DEX swaps (use opentrade-dex-swap), on-chain balances (use opentrade-portfolio), on-chain market data (use opentrade-market), token search (use opentrade-token), custodial wallet (use opentrade-wallet), or transaction broadcasting (use opentrade-gateway).

2026-05-105

opentrade-dex-swap.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'swap tokens', 'trade OKB for USDC', 'buy tokens', 'sell tokens', 'exchange crypto', 'convert tokens', 'swap SOL for USDC', 'get a swap quote', 'execute a trade', 'find the best swap route', 'cheapest way to swap', 'optimal swap', 'compare swap rates', or mentions swapping, trading, buying, selling, or exchanging tokens on XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, or any of 20+ supported chains. Aggregates liquidity from 500+ DEX sources for optimal routing and price. Supports slippage control, price impact protection, and cross-DEX route optimization. Do NOT use for general programming questions about swap code, or for analytical questions about historical swap volume.

2026-04-175

opentrade-gateway.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'broadcast transaction', 'send tx', 'estimate gas', 'simulate transaction', 'check tx status', 'track my transaction', 'get gas price', 'gas limit', 'broadcast signed tx', or mentions broadcasting transactions, sending transactions on-chain, gas estimation, transaction simulation, tracking broadcast orders, or checking transaction status. Covers gas price, gas limit estimation, transaction simulation, transaction broadcasting, and order tracking across XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use for swap quote or execution — use opentrade-dex-swap instead. Do NOT use for general programming questions about transaction handling.

2026-04-175

opentrade-market.md

from "6551Team/opentrade"

Use this skill when users want live on-chain market data: token prices, price charts (K-line, OHLC), trade history, swap activity. Also, it covers on-chain signals — smart money, whale, and KOL wallet activity, large trades, and signal-supported chains. For meme tokens: scanning new launches, checking dev wallets, developer reputation, rug pull detection, rug pull history, tokens by same creator, detecting bundles or snipers, bonding curves %, flagging suspicious launches, and meme token safety checks. For token search, market cap, liquidity, trending tokens, or holder distribution, use opentrade-token instead.

2026-04-175

opentrade-portfolio.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'check my wallet balance', 'show my token holdings', 'how much OKB do I have', 'what tokens do I have', 'check my portfolio value', 'view my assets', 'how much is my portfolio worth', 'what\'s in my wallet', or mentions checking wallet balance, total assets, token holdings, portfolio value, remaining funds, DeFi positions, or multi-chain balance lookup. Supports XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use for general programming questions about balance variables or API documentation. Do NOT use when the user is asking how to build or integrate a balance feature into code.

2026-04-175

opentrade-token.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'find a token', 'search for a token', 'look up PEPE', 'what's trending', 'top tokens', 'trending tokens on Solana', 'token rankings', 'who holds this token', 'holder distribution', 'token market cap', 'token liquidity', 'research a token', 'tell me about this token', 'token info', or mentions searching for tokens by name or address, discovering trending tokens, viewing token rankings, checking holder distribution, or analyzing token market cap and liquidity. Covers token search, metadata, market cap, liquidity, volume, trending token rankings, and holder analysis across XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use when the user says only a single generic word like 'tokens' or 'crypto' without specifying a token name, action, or question. For simple current price checks, price charts, candlestick data, or trade history, use opentrade-market instead. For meme token safety analysis, developer reputation, rug pull checks,

2026-04-175

package.json

"author": "6551Team"

"repository": "6551Team/opentrade"

GitHub 저장소 열기 Creator 저장소 보기

$ install --global

$ download --local

Manus에서 실행

$ useful --forSOC

소프트웨어 개발자컴퓨터 및 수학직15-1252L4

name	opentrade-wallet
description	This skill should be used when the user asks to 'create a custodial wallet', 'create a managed wallet', 'get my wallet address', 'show my custodial account', 'custodial swap', 'swap with managed wallet', 'withdraw from custodial wallet', 'withdraw BNB', 'withdraw SOL', 'send native tokens from custodial wallet', or mentions creating, managing, swapping, or withdrawing with a custodial (managed/hosted) wallet. Only supports BSC and Solana networks. Do NOT use for non-custodial wallet operations, general balance queries (use opentrade-portfolio), or swap quotes without custodial execution (use opentrade-dex-swap).
license	Apache-2.0
metadata	{"author":6551,"version":"1.0.1","homepage":"https://www.newsliquid.com"}

OpenTrade Custodial Wallet

4 API endpoints for custodial wallet creation, account query, swap execution, and native token withdrawal.

IMPORTANT: Custodial wallet only supports BSC and Solana networks.

IMPORTANT: Newly created wallets have zero balance. You must deposit BNB (to the BSC address) or SOL (to the Solana address) before you can swap or withdraw. Do NOT send tokens from other chains (e.g., Ethereum, Polygon, Arbitrum) to these addresses — funds sent from unsupported chains will be lost.

Pre-flight Checks

Every time before running any custodial wallet command, always follow these steps in order:

Find or create a .env file in the project root to load the API credentials:

OPEN_TOKEN=your_token_here

Get your API token at: https://www.newsliquid.com/mcp

Security warning: Never commit .env to git (add it to .gitignore) and never expose credentials in logs, screenshots, or chat messages.

Set the base URL and auth header:

BASE_URL="https://ai.6551.io"
AUTH_HEADER="Authorization: Bearer $OPEN_TOKEN"

Skill Routing

For swap quotes (read-only price estimate) → use opentrade-dex-swap
For token search / metadata → use opentrade-token
For market prices → use opentrade-market
For wallet balances / portfolio → use opentrade-portfolio
For transaction broadcasting (non-custodial) → use opentrade-gateway
For custodial wallet management → use this skill (opentrade-wallet)

Quickstart

# 1. Create a custodial wallet (EVM + Solana)
curl -s -X POST "$BASE_URL/open/trader/custodial/create" \
  -H "$AUTH_HEADER" -H "Content-Type: application/json"

# 2. Get custodial account addresses
curl -s "$BASE_URL/open/trader/custodial/account" \
  -H "$AUTH_HEADER"

# 3. Custodial swap (auto-sign + broadcast)
curl -s -X POST "$BASE_URL/open/trader/custodial/swap" \
  -H "$AUTH_HEADER" -H "Content-Type: application/json" \
  -d '{"chainIndex":"56","fromTokenAddress":"0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee","toTokenAddress":"0x55d398326f99059fF775485246999027B3197955","amount":"1000000000000000000","slippagePercent":"1"}'

# 4. Withdraw native tokens
curl -s -X POST "$BASE_URL/open/trader/custodial/withdraw" \
  -H "$AUTH_HEADER" -H "Content-Type: application/json" \
  -d '{"network":"bsc","to":"0xRecipientAddress","amount":1000000000000000000}'

Command Index

#	Endpoint	Method	Description
1	`/open/trader/custodial/create`	POST	创建托管钱包（同时生成 EVM 和 Solana 地址）
2	`/open/trader/custodial/account`	GET	获取托管钱包地址
3	`/open/trader/custodial/swap`	POST	托管钱包执行 DEX swap（自动签名+广播）
4	`/open/trader/custodial/withdraw`	POST	从托管钱包提现原生代币（BSC/SOL）

Supported Networks

Custodial wallet only supports BSC and Solana.

Chain	chainIndex	Native Token	Withdraw Network
BSC	`56`	BNB	`bsc`
Solana	`501`	SOL	`sol`

Cross-Skill Workflows

Workflow A: Create Wallet → Deposit → Check Balance → Swap

User: "Create a custodial wallet and swap 1 BNB for USDT"

1. opentrade-wallet         POST /open/trader/custodial/create              → get evm_address, sol_address
       → Tell user to deposit BNB (BSC) or SOL (Solana) to the new address
       → WARNING: only accept BNB/SOL, do NOT send other chain assets
2. opentrade-portfolio opentrade portfolio all-balances --address <evm_address> --chains bsc
       → verify BNB balance >= 1 (user must have deposited first)
3. opentrade-wallet         POST /open/trader/custodial/swap
       {"chainIndex":"56","fromTokenAddress":"0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee",
        "toTokenAddress":"0x55d398326f99059fF775485246999027B3197955",
        "amount":"1000000000000000000","slippagePercent":"1"}
       → returns tx_hash

Data handoff:

evm_address from step 1 → --address in step 2
Custodial swap auto-signs and broadcasts — no manual signing needed

Workflow B: Swap Quote → Custodial Swap

User: "Get a quote for swapping BNB to USDT, then execute with custodial wallet"

1. opentrade-dex-swap  opentrade swap quote \
       --from 0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee \
       --to 0x55d398326f99059fF775485246999027B3197955 \
       --amount 1000000000000000000 --chain bsc
       → display quote: expected output, price impact
       ↓ user confirms
2. opentrade-wallet         POST /open/trader/custodial/swap
       → auto-sign and broadcast, returns tx_hash

Workflow C: Withdraw After Swap

User: "Swap BNB to USDT, then withdraw BNB to my external wallet"

1. opentrade-wallet         POST /open/trader/custodial/swap → swap tokens
2. opentrade-wallet         POST /open/trader/custodial/withdraw
       {"network":"bsc","to":"0xExternalWallet","amount":1000000000000000000}
       → returns tx_hash

Note: Withdraw only supports native tokens (BNB on BSC, SOL on Solana).

Operation Flow

Step 1: Identify Intent

Create a new custodial wallet → POST /open/trader/custodial/create
View custodial wallet addresses → GET /open/trader/custodial/account
Execute a swap automatically → POST /open/trader/custodial/swap
Withdraw native tokens → POST /open/trader/custodial/withdraw

Step 2: Collect Parameters

Missing wallet address → call GET /open/trader/custodial/account first, or create one with POST /open/trader/custodial/create
Missing token addresses → use opentrade-token to search token by name
Missing amount → ask user, remind to convert to minimal units
Missing slippage → suggest 1% default
Missing network for withdraw → ask user, only bsc or sol supported
User requests unsupported chain → inform user that custodial wallet only supports BSC and Solana

Step 3: Execute & Display

Run the API call
Parse JSON response
Display human-readable summary

Step 4: Suggest Next Steps

Just completed	Suggest
Wallet created	1. Deposit BNB (BSC) or SOL (Solana) to the new address — do NOT send other chain assets 2. Check balance → `opentrade-portfolio`
Account queried	1. Check balance → `opentrade-portfolio` 2. Execute a swap → custodial swap (this skill)
Swap executed	1. Check updated balance → `opentrade-portfolio` 2. Withdraw to external wallet → custodial withdraw (this skill)
Withdraw completed	1. Check remaining balance → `opentrade-portfolio` 2. Swap another token → custodial swap (this skill)

Present conversationally — never expose endpoint paths to the user.

API Reference

1. Create Custodial Wallet

创建托管钱包，同时生成 EVM（BSC）和 Solana 地址。每个用户只能创建一个钱包。

curl -s -X POST "$BASE_URL/open/trader/custodial/create" \
  -H "$AUTH_HEADER" \
  -H "Content-Type: application/json"

Parameters: None (user identity from JWT token)

Response:

{
  "success": true,
  "data": {
    "evm_address": "0x742d35Cc6634C0532925a3b844Bc9e7595f0bEb",
    "sol_address": "7EcDhSYGxXyscszYEp35KHN8vvw3svAuLKTzXwCFLtV"
  }
}

Return fields:

Field	Type	Description
`evm_address`	String	BSC 链地址
`sol_address`	String	Solana 链地址

Display to user:

"Custodial wallet created!"
"BSC Address: 0x742d..."
"Solana Address: 7EcD..."
"Please deposit BNB to your BSC address or SOL to your Solana address before trading."
"WARNING: Only send BNB (BSC network) or SOL (Solana network). Do NOT send tokens from other chains — funds will be lost."

2. Get Custodial Account

获取当前用户的托管钱包地址。

curl -s "$BASE_URL/open/trader/custodial/account" \
  -H "$AUTH_HEADER"

Parameters: None

Response:

{
  "success": true,
  "data": {
    "evm_address": "0x742d35Cc6634C0532925a3b844Bc9e7595f0bEb",
    "sol_address": "7EcDhSYGxXyscszYEp35KHN8vvw3svAuLKTzXwCFLtV"
  }
}

Return fields:

Field	Type	Description
`evm_address`	String	BSC 链地址
`sol_address`	String	Solana 链地址

3. Custodial Swap

使用托管钱包执行 DEX swap。服务端自动完成签名和广播。仅支持 BSC（chainIndex: 56）和 Solana（chainIndex: 501）。

curl -s -X POST "$BASE_URL/open/trader/custodial/swap" \
  -H "$AUTH_HEADER" \
  -H "Content-Type: application/json" \
  -d '{
    "chainIndex": "56",
    "fromTokenAddress": "0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee",
    "toTokenAddress": "0x55d398326f99059fF775485246999027B3197955",
    "amount": "1000000000000000000",
    "slippagePercent": "1"
  }'

Parameters:

Field	Type	Required	Description
`chainIndex`	String	Yes	链 ID：`"56"`（BSC）或 `"501"`（Solana）
`fromTokenAddress`	String	Yes	源代币合约地址
`toTokenAddress`	String	Yes	目标代币合约地址
`amount`	String	Yes	交易数量（最小单位）
`slippagePercent`	String	No	滑点百分比（默认 `"1"`，即 1%）

Response:

{
  "success": true,
  "data": {
    "tx_hash": "0xabc123def456...",
    "error": ""
  }
}

Return fields:

Field	Type	Description
`tx_hash`	String	交易哈希（成功时返回）
`error`	String	错误信息（失败时返回）

Display to user:

"Swap executed successfully!"
"Tx Hash: 0xabc123..."
If error is non-empty, display the error message

4. Custodial Withdraw

从托管钱包提现原生代币。仅支持 BSC (BNB) 和 Solana (SOL)。

curl -s -X POST "$BASE_URL/open/trader/custodial/withdraw" \
  -H "$AUTH_HEADER" \
  -H "Content-Type: application/json" \
  -d '{
    "network": "bsc",
    "to": "0xRecipientAddress",
    "amount": 1000000000000000000
  }'

Parameters:

Field	Type	Required	Description
`network`	String	Yes	网络类型：`bsc` 或 `sol`
`to`	String	Yes	接收地址
`amount`	Integer	Yes	提现数量（最小单位，必须大于 0）。BSC 单位为 wei（1 BNB = 10^18 wei），Solana 单位为 lamports（1 SOL = 10^9 lamports）

Response:

{
  "success": true,
  "data": {
    "tx_hash": "0xdef789...",
    "network": "bsc"
  }
}

Return fields:

Field	Type	Description
`tx_hash`	String	提现交易哈希
`network`	String	执行提现的网络

Display to user:

"Withdrawal successful!"
"Tx Hash: 0xdef789..."
"Network: BSC"

Native Token Addresses

Chain	Native Token Address
BSC	`0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee`
Solana	`11111111111111111111111111111111`

Input / Output Examples

User says: "Create a custodial wallet for me"

curl -s -X POST "$BASE_URL/open/trader/custodial/create" -H "$AUTH_HEADER" -H "Content-Type: application/json"
# → Wallet created! BSC: 0x742d..., Solana: 7EcD...

User says: "Swap 0.1 BNB for USDT on BSC using my custodial wallet"

# Amount: 0.1 BNB = 100000000000000000 wei
curl -s -X POST "$BASE_URL/open/trader/custodial/swap" \
  -H "$AUTH_HEADER" -H "Content-Type: application/json" \
  -d '{"chainIndex":"56","fromTokenAddress":"0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee","toTokenAddress":"0x55d398326f99059fF775485246999027B3197955","amount":"100000000000000000","slippagePercent":"1"}'
# → Swap executed! Tx Hash: 0xabc...

User says: "Withdraw 1 SOL to my external wallet"

# Amount: 1 SOL = 1000000000 lamports
curl -s -X POST "$BASE_URL/open/trader/custodial/withdraw" \
  -H "$AUTH_HEADER" -H "Content-Type: application/json" \
  -d '{"network":"sol","to":"ExternalSolanaAddress","amount":1000000000}'
# → Withdrawal successful! Tx Hash: 5xYz...

Edge Cases

Wallet already exists: POST /open/trader/custodial/create will return an error if the user already has a wallet. Use GET /open/trader/custodial/account to retrieve existing addresses.
New wallet has zero balance: After creating a wallet, the user must deposit BNB (via BSC network) or SOL (via Solana network) before performing any swap or withdraw. Do NOT deposit tokens from other chains (Ethereum, Polygon, Arbitrum, etc.) — those funds will be permanently lost.
Unsupported chain: Custodial wallet only supports BSC (chainIndex: 56) and Solana (chainIndex: 501). If the user requests another chain (e.g., Ethereum, Arbitrum), inform them that the custodial wallet does not support that chain and suggest using a non-custodial workflow with opentrade-dex-swap + opentrade-gateway.
Insufficient balance: Swap or withdraw will fail if the custodial wallet has insufficient funds. Check balance with opentrade-portfolio first.
Unsupported network for withdraw: Only bsc and sol are supported for withdraw.
Amount must be positive: The amount field for withdraw must be greater than 0.
High slippage swap: If slippage is too low, the swap may fail. Suggest increasing slippage for volatile tokens.
Network error: Retry once, then prompt user to try again later.
Region restriction (error code 50125 or 80001): Do NOT show the raw error code to the user. Instead, display a friendly message: Service is not available in your region. Please switch to a supported region and try again.

Amount Display Rules

Input/output amounts in UI units (0.1 BNB, 50 USDT)
Internal API params use minimal units (1 BNB = "1000000000000000000", 1 SOL = 1000000000)
Display tx hash as clickable link when possible

Global Notes

All endpoints require Authorization: Bearer <token> header
Only BSC and Solana are supported — do not attempt other chains
Amounts must be in minimal units (wei for BSC, lamports for Solana)
EVM contract addresses must be all lowercase
Custodial swap handles signing and broadcasting automatically — no need to call sign or broadcast separately
Withdraw only supports native tokens (BNB/SOL)
The custodial wallet is powered by Turnkey with AWS KMS for delegated key custody — 6551 does NOT store your private keys

opentrade-wallet

이 저장소의 다른 Skills

OpenTrade Custodial Wallet

Pre-flight Checks

Skill Routing

Quickstart

Command Index

Supported Networks

Cross-Skill Workflows

Workflow A: Create Wallet → Deposit → Check Balance → Swap

Workflow B: Swap Quote → Custodial Swap

Workflow C: Withdraw After Swap

Operation Flow

Step 1: Identify Intent

Step 2: Collect Parameters

Step 3: Execute & Display

Step 4: Suggest Next Steps

API Reference

1. Create Custodial Wallet

2. Get Custodial Account

3. Custodial Swap

4. Custodial Withdraw

Native Token Addresses

Input / Output Examples

Edge Cases

Amount Display Rules

Global Notes

OpenTrade Custodial Wallet

Pre-flight Checks

Skill Routing

Quickstart

Command Index

Supported Networks

Cross-Skill Workflows

Workflow A: Create Wallet → Deposit → Check Balance → Swap

Workflow B: Swap Quote → Custodial Swap

Workflow C: Withdraw After Swap

Operation Flow

Step 1: Identify Intent

Step 2: Collect Parameters

Step 3: Execute & Display

Step 4: Suggest Next Steps

API Reference

1. Create Custodial Wallet

2. Get Custodial Account

3. Custodial Swap

4. Custodial Withdraw

Native Token Addresses

Input / Output Examples

Edge Cases

Amount Display Rules

Global Notes

이 저장소의 다른 Skills