원클릭으로 Manus에서 모든 스킬 실행

distributed-patterns

Use when designing distributed systems or evaluating distributed architecture patterns. Covers CAP theorem trade-offs, consensus protocols (Raft, Paxos), saga orchestration, CRDTs, event sourcing, partition handling, distributed transactions, and failure detectors. Do not use for general API design (use api-design) or database schema design (use schema-design).

Manus에서 실행

개요

설치 명령

npx skills add https://github.com/dtsong/my-claude-setup --skill distributed-patterns

이 명령을 Claude Code에 복사하여 붙여넣어 스킬을 설치하세요

출처

dtsong/my-claude-setup

스타5

포크0

업데이트2026년 3월 26일 08:42

SKILL.md

readonly

name	distributed-patterns
department	architect
description	Use when designing distributed systems or evaluating distributed architecture patterns. Covers CAP theorem trade-offs, consensus protocols (Raft, Paxos), saga orchestration, CRDTs, event sourcing, partition handling, distributed transactions, and failure detectors. Do not use for general API design (use api-design) or database schema design (use schema-design).
version	1
triggers	["distributed","consensus","partition","saga","CRDT","event sourcing","microservices","distributed transactions","Raft","Paxos","CAP theorem"]

Distributed Patterns

Purpose

Evaluate distributed system design decisions and recommend appropriate patterns for consistency, availability, partition tolerance, and failure handling. Ensure designs account for the fundamental constraints of distributed computing.

Scope Constraints

Analyzes architecture documents, system diagrams, and code for distributed system patterns. Does not modify files or execute code. Does not benchmark or load-test distributed systems.

Inputs

System architecture overview (services, data stores, communication patterns)
Consistency requirements (strong, eventual, causal)
Availability and latency SLAs
Expected failure modes and partition scenarios
Current distributed patterns in use, if any

Input Sanitization

No user-provided values are used in commands or file paths. All inputs are treated as read-only analysis targets.

Procedure

Progress Checklist

Step 1: Classify CAP trade-offs
Step 2: Evaluate consistency patterns
Step 3: Design failure handling
Step 4: Review data synchronization
Step 5: Assess transaction patterns
Step 6: Validate operational readiness

Step 1: Classify CAP Trade-offs

Identify each service's position on the CAP spectrum.
Map which data requires strong consistency vs eventual consistency.
Document partition behavior: does the system favor CP or AP per data domain?
Flag services that implicitly assume no partitions (single-region, no failover).
Verify the design explicitly acknowledges CAP trade-offs rather than ignoring them.

Step 2: Evaluate Consistency Patterns

Identify consensus requirements (leader election, distributed locks, config agreement).
Recommend consensus protocol fit: Raft for simplicity, Paxos/Multi-Paxos for flexibility, ZAB for ordered broadcast.
Evaluate CRDT suitability for conflict-free replicated data (counters, sets, registers, maps).
Check event sourcing applicability: append-only event log, projection rebuilds, event versioning.
Verify causal ordering where needed (vector clocks, hybrid logical clocks).

Step 3: Design Failure Handling

Enumerate failure detector strategy (heartbeats, phi-accrual, swim protocol).
Define timeout budgets per service call (connect, read, total).
Specify circuit breaker configuration (threshold, half-open behavior, fallback).
Plan for partial failure: which operations can proceed with degraded service?
Document split-brain prevention strategy for stateful services.

Step 4: Review Data Synchronization

Map data replication topology (single-leader, multi-leader, leaderless).
Identify read-after-write consistency requirements and implementation.
Check for anti-entropy mechanisms (Merkle trees, read repair, hinted handoff).
Verify conflict resolution strategy for concurrent writes (last-writer-wins, merge functions, manual).
Assess replication lag tolerance per data domain.

Step 5: Assess Transaction Patterns

Identify cross-service transaction requirements.
Evaluate saga pattern fit: orchestration (central coordinator) vs choreography (event-driven).
Define compensating transactions for each saga step.
Check idempotency guarantees for all saga participants.
Verify at-least-once delivery with deduplication for message-driven flows.
Flag any use of distributed locks or two-phase commit — justify or replace.

Step 6: Validate Operational Readiness

Verify distributed tracing spans cross service boundaries (trace ID propagation).
Check that partition/failover scenarios have runbooks.
Confirm chaos engineering tests cover: network partition, node failure, clock skew.
Validate that the system degrades gracefully under partial failure.

Validation gate: Revisit this analysis after 5+ sessions to verify patterns held up under real-world usage and evolution.

Compaction resilience: If context was lost, re-read the Inputs section to identify the system under analysis, check the Progress Checklist for completed steps, then resume from the earliest incomplete step.

Output Format

Pattern Selection Matrix

Concern	Pattern	Rationale	Trade-off
Consistency	Raft / CRDT / Event sourcing	...	...
Failure handling	Circuit breaker + phi-accrual	...	...
Transactions	Saga (orchestration)	...	...
Replication	Single-leader with read replicas	...	...

Failure Scenario Table

Scenario	Impact	Mitigation	Recovery Time
Network partition between A and B	...	...	...
Leader node failure	...	...	...

Handoff

Hand off to api-design for service boundary API contracts.
Hand off to operator/deployment-plan for multi-region deployment topology.
Hand off to prover/formal-spec if consensus protocol correctness needs formal verification.

Quality Checks

CAP trade-offs explicitly documented per data domain
Consensus protocol selection justified with requirements
Failure detectors and timeout budgets specified
Saga compensating transactions defined for each step
Idempotency and deduplication verified for message-driven flows
Replication strategy and conflict resolution documented
Distributed tracing confirmed across service boundaries
Chaos engineering scenarios identified

Evolution Notes

이 저장소의 다른 Skills

같은 저장소

docx-to-pdf

dtsong/my-claude-setup

Use to convert a Word .docx file to PDF and/or verify its page count. Triggers on: converting docx to pdf, rendering a document, checking how many pages a docx produces, or asserting a page-count constraint (e.g. a resume must stay 2 pages). Wraps LibreOffice headless conversion.

2026-05-265

resume-tailor

dtsong/my-claude-setup

Use whenever Alan Yu is applying to a specific job and needs his resume or cover letter tailored to that opportunity. Triggers on: pasting a job description, asking 'how should I tailor this for [role]', requesting a cover letter for a specific company, asking for fit analysis between Alan's background and a posted role, or producing a .docx resume targeted at a specific employer. Do NOT use for unrelated resume work or for other people's resumes.

2026-05-265

evaluate-diagram

dtsong/my-claude-setup

Use this skill when scoring or comparing a generated diagram against a human reference. Triggers on "score this diagram", "evaluate my diagram", "compare to reference", or "how accurate is this". Applies when both a generated diagram and a reference image exist and quality assessment is needed. Do NOT use for creating new diagrams (use generate-diagram) or plotting data (use generate-plot).

2026-04-065

generate-diagram

dtsong/my-claude-setup

Use this skill when creating a methodology diagram from research text. Triggers on "make a diagram", "visualize this methodology", "diagram this process", or "generate a figure from this paper". Applies to methodology descriptions, process flows, and research paper sections. Do NOT use for scoring existing diagrams (use evaluate-diagram) or plotting data from CSV/JSON (use generate-plot).

2026-04-065

generate-plot

dtsong/my-claude-setup

Use this skill when creating a statistical plot or chart from a data file. Triggers on "plot this data", "make a chart", "graph this CSV", or "visualize these results". Applies to CSV, JSON, or tabular data needing bar charts, scatter plots, line graphs, or similar visualizations. Do NOT use for methodology diagrams from text (use generate-diagram) or diagram scoring (use evaluate-diagram).

2026-04-065

verilator-simulation

dtsong/my-claude-setup

Use when planning or reviewing Verilator-based simulation workflows for SystemVerilog designs. Covers lint analysis, simulation setup, trace/waveform debugging, coverage-driven verification, and C++ co-simulation. Do not use for commercial EDA tools (use verification-methodology) or RTL design flow (use chip-design-flow).

2026-03-305

출처

dtsong

dtsong/my-claude-setup

GitHub 저장소 열기 Creator 저장소 보기

설치 명령

다운로드

Manus에서 실행

유용한 대상SOC

소프트웨어 개발자컴퓨터 및 수학직15-1252L4