worktree-lifecycle

name	worktree-lifecycle
description	Use when starting isolated feature work or before executing implementation plans. Manages full worktree lifecycle from creation through cleanup with safety checks and error recovery.
keywords	["worktree","git","isolation","feature-branch","parallel-development","workspace","cleanup","lifecycle","worktrees"]
created	"2026-02-11T00:00:00.000Z"
updated	"2026-02-11T00:00:00.000Z"
plugin	dev
type	discipline
difficulty	intermediate

Worktree Lifecycle

Purpose: Manage git worktrees for isolated feature work with safety checks, multi-stack setup, and clean lifecycle management.

When to Use

This skill applies whenever you:

• Start a new feature that requires isolated workspace
• Execute risky or experimental changes
• Need to keep current work untouched while testing alternatives
• Coordinate parallel agent work (each agent in separate worktree)
• Follow an implementation plan requiring clean environment
• Preserve long-running feature work across sessions

Trigger keywords: experiment, prototype, risky, breaking, parallel, isolate, worktree, workspace

Red Flags (Anti-Patterns)

• Creating worktree without checking if branch already exists
• Creating worktree without checking if directory path is available
• Forgetting to add worktree directory to .gitignore
• Manually deleting worktree with rm -rf (use git worktree remove)
• Removing worktree with uncommitted changes without user confirmation
• Using same branch in multiple worktrees simultaneously
• Working in worktree after returning to main directory (stale CWD)
• Not storing original CWD before entering worktree
• Skipping dependency installation in new worktree
• Not running baseline tests before starting work

6-Phase Lifecycle

Phase 1: Pre-flight Checks

Purpose: Verify all prerequisites before creating anything.

Required checks (all must pass):

# 1. Verify git repository
git rev-parse --git-dir &>/dev/null
if [ $? -ne 0 ]; then
  ERROR: "Not a git repository"
  RECOVERY: Abort with clear error message
fi

# 2. Detect detached HEAD state
if ! git symbolic-ref HEAD &>/dev/null; then
  WARNING: "Currently in detached HEAD state"
  RECOVERY: Ask user if they want to create branch from current commit
fi

# 3. Check if branch already in a worktree
if git worktree list | grep -q "$BRANCH"; then
  ERROR: "Branch $BRANCH already checked out in a worktree"
  RECOVERY: Ask user - reuse existing, rename branch, or cancel
fi

# 4. Check if branch exists (but not in worktree)
if git branch --list "$BRANCH" | grep -q .; then
  WARNING: "Branch $BRANCH already exists"
  RECOVERY: Ask user - use existing branch or create new with different name
fi

# 5. Check if target path is available
# IMPORTANT: Create directory first before checking (git check-ignore needs path to exist)
mkdir -p "$WORKTREE_DIR"
if [ -d "$WORKTREE_PATH" ]; then
  ERROR: "Directory $WORKTREE_PATH already exists"
  RECOVERY: Ask user - choose different path or remove existing
fi

Error Recovery Table:

Error	Detection	Recovery
Not a git repo	git rev-parse --git-dir fails	Abort with clear error
Detached HEAD	git symbolic-ref HEAD fails	Ask: create branch from commit?
Branch in worktree	git worktree list | grep $BRANCH succeeds	Ask: reuse, rename, or cancel
Branch exists	git branch --list $BRANCH returns result	Ask: use existing or rename
Path exists	Directory already present	Ask: choose different path or remove
Parent not writable	Cannot create parent directory	Abort with permission error

Phase 2: Directory Selection

Priority order (cascading, first match wins):

1. Check for existing .worktrees/ directory → use it (no prompt)
2. Check for existing worktrees/ directory → use it (no prompt)
3. Check CLAUDE.md for worktree preference → follow it (no prompt)
4. Ask user (only if no default found)

For orchestrator integration: Pass WORKTREE_DIR=".worktrees" to skip this phase entirely.

Example detection:

if [ -d ".worktrees" ]; then
  WORKTREE_DIR=".worktrees"
elif [ -d "worktrees" ]; then
  WORKTREE_DIR="worktrees"
elif grep -q "worktree.*directory" CLAUDE.md 2>/dev/null; then
  WORKTREE_DIR=$(grep "worktree.*directory" CLAUDE.md | extract_path)
else
  # Ask user via AskUserQuestion
  # Options: .worktrees/, worktrees/, custom
fi

Phase 3: Creation

Steps (must be executed in order):

# 1. Verify .gitignore safety
# IMPORTANT: Directory must exist before git check-ignore
mkdir -p "$WORKTREE_DIR"

if ! git check-ignore -q "$WORKTREE_DIR" 2>/dev/null; then
  echo "$WORKTREE_DIR/" >> .gitignore
  git add .gitignore
  git commit -m "chore: add $WORKTREE_DIR to .gitignore"
fi

# 2. Store original CWD (critical for Phase 6 cleanup)
ORIGINAL_CWD=$(pwd)

# 3. Create worktree
git worktree add "$WORKTREE_PATH" -b "$BRANCH"

# 4. Verify creation succeeded
if [ ! -d "$WORKTREE_PATH" ]; then
  ERROR: "Worktree creation failed"
  RECOVERY: Clean up any partial state, report error
  exit 1
fi

# 5. Change to worktree directory
cd "$WORKTREE_PATH"

# 6. Initialize submodules (if any)
if [ -f .gitmodules ]; then
  git submodule update --init --recursive
fi

# 7. Write statusline worktree marker (persists across compaction)
if [ -n "$SESSION_ID" ]; then
  cat > "$HOME/.claude/.statusline-worktree-${SESSION_ID}" <<MARKER_EOF
{
  "worktree_path": "$WORKTREE_PATH",
  "branch": "$BRANCH",
  "worktree_name": "$(basename "$WORKTREE_PATH")"
}
MARKER_EOF
fi

Error handling: If git worktree add fails, clean up any partial state and report the error to user.

Phase 4: Setup

Multi-stack detection:

# Detect all present stacks
STACKS=()
[ -f package.json ] && STACKS+=("nodejs")
[ -f Cargo.toml ] && STACKS+=("rust")
[ -f go.mod ] && STACKS+=("golang")
[ -f pyproject.toml ] || [ -f requirements.txt ] && STACKS+=("python")
[ -f Gemfile ] && STACKS+=("ruby")

# Run setup for each detected stack
for stack in "${STACKS[@]}"; do
  echo "Setting up $stack..."
  case "$stack" in
    nodejs)
      if [ -f bun.lockb ]; then
        bun install
      elif [ -f pnpm-lock.yaml ]; then
        pnpm install
      elif [ -f yarn.lock ]; then
        yarn install
      else
        npm install
      fi
      ;;
    rust)
      cargo build
      ;;
    golang)
      go mod download
      ;;
    python)
      if [ -f pyproject.toml ]; then
        pip install -e .
      else
        pip install -r requirements.txt
      fi
      ;;
    ruby)
      bundle install
      ;;
  esac
done

Baseline test verification:

# Run tests and capture output (allow pre-existing failures)
for stack in "${STACKS[@]}"; do
  case "$stack" in
    nodejs)
      if [ -f bun.lockb ]; then
        bun test 2>&1 | tee test-output.log
      else
        npm test 2>&1 | tee test-output.log
      fi
      ;;
    rust)
      cargo test 2>&1 | tee test-output.log
      ;;
    golang)
      go test ./... 2>&1 | tee test-output.log
      ;;
    python)
      pytest 2>&1 | tee test-output.log
      ;;
  esac

  # Parse test results (do NOT block on pre-existing failures)
  PASSING=$(grep -o '[0-9]* passing' test-output.log | cut -d' ' -f1)
  FAILING=$(grep -o '[0-9]* failing' test-output.log | cut -d' ' -f1)

  echo "Baseline tests: $PASSING passing, $FAILING failing"
  if [ "${FAILING:-0}" -gt 0 ]; then
    echo "WARNING: Pre-existing test failures detected. Proceed with caution."
  fi
done

Phase 5: Handoff

Structured output for orchestrator:

Worktree ready:
  Path: .worktrees/feature-auth-system
  Branch: feature/auth-system
  Stacks: nodejs
  Dependencies: installed
  Tests: 47 passing, 0 failing
  Status: READY

Original CWD: /path/to/project
Worktree CWD: /path/to/project/.worktrees/feature-auth-system

Write metadata to session (for cleanup phase):

cat > "${SESSION_PATH}/worktree-metadata.json" <<EOF
{
  "worktreePath": "$WORKTREE_PATH",
  "absolutePath": "$(realpath $WORKTREE_PATH)",
  "branchName": "$BRANCH",
  "originalCwd": "$ORIGINAL_CWD",
  "createdAt": "$(date -u +%Y-%m-%dT%H:%M:%SZ)",
  "stacks": $(printf '%s\n' "${STACKS[@]}" | jq -R . | jq -s .),
  "baselineTests": {
    "passing": ${PASSING:-0},
    "failing": ${FAILING:-0}
  },
  "status": "active"
}
EOF

Orchestrator context passing (for dev:developer):

SESSION_PATH: ${SESSION_PATH}
WORKTREE_PATH: ${WORKTREE_PATH}
BRANCH_NAME: ${BRANCH_NAME}
ORIGINAL_CWD: ${ORIGINAL_CWD}

IMPORTANT: You are working in an isolated worktree.
- cd to WORKTREE_PATH before writing any code
- Session artifacts stay in SESSION_PATH (main worktree)
- When complete, return control to orchestrator for cleanup

Phase 6: Cleanup

Trigger conditions:

• Orchestrator completion phase
• Explicit user request via /dev:worktree cleanup
• Error recovery (abort implementation)

Steps (with safety checks):

# 1. Verify worktree metadata exists
if [ ! -f "${SESSION_PATH}/worktree-metadata.json" ]; then
  ERROR: "No worktree metadata found"
  RECOVERY: Ask user for worktree path manually
fi

# Read metadata
WORKTREE_PATH=$(jq -r .worktreePath "${SESSION_PATH}/worktree-metadata.json")
ORIGINAL_CWD=$(jq -r .originalCwd "${SESSION_PATH}/worktree-metadata.json")
BRANCH=$(jq -r .branchName "${SESSION_PATH}/worktree-metadata.json")

# 2. Return to original CWD if currently in worktree
CURRENT_CWD=$(pwd)
if [[ "$CURRENT_CWD" == *"$WORKTREE_PATH"* ]]; then
  cd "$ORIGINAL_CWD"
fi

# 3. Check for uncommitted changes
cd "$WORKTREE_PATH"
if [ -n "$(git status --porcelain)" ]; then
  # Use AskUserQuestion to resolve
  echo "WARNING: Uncommitted changes detected in worktree"
  # Options: commit now, stash, discard, abort cleanup
  # DO NOT proceed until resolved
fi

# 4. Return to original CWD
cd "$ORIGINAL_CWD"

# 5. Remove worktree (NEVER use rm -rf)
git worktree remove "$WORKTREE_PATH"

# 6. Optionally delete branch (only if merged or user confirms)
if git branch --merged | grep -q "$BRANCH"; then
  git branch -d "$BRANCH"  # Safe delete (only if merged)
else
  # Ask user: keep branch or force delete?
  # git branch -D "$BRANCH"  # Force delete (only with confirmation)
fi

# 7. Update metadata status
jq '.status = "removed" | .removedAt = "'$(date -u +%Y-%m-%dT%H:%M:%SZ)'"' \
  "${SESSION_PATH}/worktree-metadata.json" > "${SESSION_PATH}/worktree-metadata.json.tmp"
mv "${SESSION_PATH}/worktree-metadata.json.tmp" "${SESSION_PATH}/worktree-metadata.json"

# 8. Remove statusline worktree marker
if [ -n "$SESSION_ID" ]; then
  rm -f "$HOME/.claude/.statusline-worktree-${SESSION_ID}"
fi

Error handling during cleanup:

Error	Detection	Recovery
Currently in worktree	CWD matches worktree path	Auto-return to original CWD
Uncommitted changes	git status --porcelain not empty	Ask user: commit/stash/discard
Worktree in use	git worktree remove fails	Ask: force removal with --force?
Branch not merged	git branch -d fails	Ask: keep branch or force delete?
Stale marker file	Marker exists but worktree removed	Auto-cleaned by statusline (marker ignored if worktree gone)

Error Recovery

Critical errors (abort workflow):

• Not a git repository
• Permission denied creating directory
• Git worktree creation fails without clear reason

Recoverable errors (ask user):

• Branch already exists → Use existing or rename
• Path already exists → Choose different path or remove
• Uncommitted changes during cleanup → Commit/stash/discard
• Tests fail during baseline → Proceed or abort

Quick Reference Card

Before starting isolated work:

1. ✅ Run Pre-flight Checks (Phase 1)
   • Git repo valid
   • Branch available
   • Path available
2. ✅ Select or detect worktree directory (Phase 2)
3. ✅ Create worktree + verify .gitignore (Phase 3)
4. ✅ Install dependencies for all stacks (Phase 4)
5. ✅ Run baseline tests (Phase 4)
6. ✅ Store metadata and hand off to agent (Phase 5)

After completing work:

7. ✅ Return to original CWD if in worktree
8. ✅ Check for uncommitted changes → resolve
9. ✅ Remove worktree with git worktree remove
10. ✅ Optionally delete branch (only if merged or confirmed)

Remember: Always use git worktree remove, never rm -rf.

Orchestrator Integration

/dev:feature Integration

Phase 0 (after session init):

• Add AskUserQuestion: "Create isolated worktree?"
• If yes: Run Phases 1-5, pass WORKTREE_PATH to all agents
• If no: Continue as normal

Phase 8 (completion):

• If worktree created: Ask cleanup options (PR, merge, keep, discard)
• Execute Phase 6 with chosen option

/dev:implement Integration

Phase 1 (lightweight version):

• Add AskUserQuestion: "Use isolated worktree?"
• If yes: Run Phases 1-5 with defaults (no directory selection)
• Use .worktrees/ automatically, skip multi-stack detection

Phase 6 (finalization):

• If worktree created: Ask "Merge and clean up?"
• Execute Phase 6 with merge or keep option

Subagent Context Template

When delegating to agents in worktrees, always include:

SESSION_PATH: ${SESSION_PATH}
WORKTREE_PATH: ${WORKTREE_PATH}
BRANCH_NAME: ${BRANCH_NAME}

IMPORTANT: You are working in an isolated worktree.
- cd to WORKTREE_PATH before writing any code
- Read from ${SESSION_PATH} for architecture/requirements
- Write code to WORKTREE_PATH (current branch: ${BRANCH_NAME})
- Session artifacts stay in ${SESSION_PATH} (main worktree)

Integration with Other Skills

• test-driven-development: Baseline tests verify environment readiness
• verification-before-completion: Worktree cleanup requires clean state
• systematic-debugging: Isolated worktrees for reproducing bugs
• context-detection: Multi-stack detection feeds into setup phase
• agent-coordination-discipline: Parallel agents use separate worktrees