원클릭으로 Manus에서 모든 스킬 실행

visio-iteration-journal

Distill reusable lessons from Visio drawing iterations in DrawForge. Use when an agent encounters a drawing problem, layout failure, export surprise, bridge recovery issue, or any repeatable obstacle during Visio work and should convert that one-off fix into a generalized lesson stored under learningskills.

Manus에서 실행

개요

설치 명령

npx skills add https://github.com/qweadzchn/DrawForge --skill visio-iteration-journal

이 명령을 Claude Code에 복사하여 붙여넣어 스킬을 설치하세요

출처

qweadzchn/DrawForge

스타3

포크0

업데이트2026년 3월 24일 14:45

SKILL.md

readonly

name	visio-iteration-journal
description	Distill reusable lessons from Visio drawing iterations in DrawForge. Use when an agent encounters a drawing problem, layout failure, export surprise, bridge recovery issue, or any repeatable obstacle during Visio work and should convert that one-off fix into a generalized lesson stored under learningskills.

Visio Iteration Journal

这个 skill 负责把“这次好不容易解决的问题”变成“下次 agent 可以直接用的经验”。

Input Contract

优先读取：

../../../../docs/architecture/LAYER_CONTRACTS.md
../../../../docs/architecture/ARTIFACT_CONTRACTS.md
../templates/lesson-template.md
../../../../Setup/jobs/<job_name>/reviews/round-*.json
导出预览 PNG

Output Contract

这个 skill 有两个层次的产物：

../../../../Setup/jobs/<job_name>/reviews/round-*.json
../lessons/*.md

如果只是本轮观察，还没抽象成通用规律，就先留在 round-review.json，不要直接写进 lesson。

When To Capture A Lesson

遇到下面这些情况就应该考虑沉淀：

导出 PNG 后才发现布局很乱
字体、文本块、尺寸反复调不对
connector 画早了导致整图难以维护
bridge / session / save / export 出现可复用的恢复经验
planner 的图分类或区域拆解明显误判
某个 drawskill 规则明显该补

Capture Workflow

先写清现象，不要一上来就写结论
抽离任务特有细节，保留可泛化信息
用 ../templates/lesson-template.md 记录
存到 ../lessons/
如果经验需要变成规则：
- 规划层经验 -> 更新 plannerskills
- 操作层经验 -> 更新 visioskills
- 构图层经验 -> 更新 drawskills
- 只是暂时观察 -> 先留在 reviews/

Writing Rule

lesson 必须写成 generalized knowledge，不写成一次任务的流水账。

Files To Read

../templates/lesson-template.md
../../../../AGENT_GUIDE.md
../../../../docs/architecture/LAYER_CONTRACTS.md
../../drawskills/visio-figure-builder/references/layout-iteration-notes.md

이 저장소의 다른 Skills

같은 저장소

visio-figure-builder

qweadzchn/DrawForge

Build publication-style figures in Microsoft Visio through the DrawForge bridge after a planner has already analyzed the source figure and produced a plan. Use when the agent needs to translate a drawing plan into layout, typography, spacing, line-style semantics, and DrawDSL, especially for research figures.

2026-03-243

visio-operator

qweadzchn/DrawForge

Operate Microsoft Visio through the DrawForge bridge with stable atomic actions. Use when an agent needs to create sessions, add/edit/connect/style shapes, save documents, export PNG previews, or execute a prepared drawing spec without taking over planning decisions.

2026-03-243

drawforge-bootstrap

qweadzchn/DrawForge

Bootstrap skill for DrawForge. Use this skill to onboard an agent into the DrawForge GitHub repository, understand the project structure, run the canonical cold-start smoke test, and begin working with the Visio-based drawing loop safely.

2026-03-243

visio-drawing-orchestrator

qweadzchn/DrawForge

Analyze a source figure, classify the diagram family, decompose regions and elements, and produce a drawing plan before any detailed Visio drawing begins. Use when a job starts from an input image and the agent must decide what to draw first, which drawskills to invoke, which visioskills capabilities are needed, and how round-by-round critique should be structured.

2026-03-203

출처

qweadzchn

qweadzchn/DrawForge

GitHub 저장소 열기 Creator 저장소 보기

설치 명령

다운로드

Manus에서 실행

유용한 대상SOC

소프트웨어 개발자컴퓨터 및 수학직15-1252L4

name	visio-iteration-journal
description	Distill reusable lessons from Visio drawing iterations in DrawForge. Use when an agent encounters a drawing problem, layout failure, export surprise, bridge recovery issue, or any repeatable obstacle during Visio work and should convert that one-off fix into a generalized lesson stored under learningskills.

Visio Iteration Journal

这个 skill 负责把“这次好不容易解决的问题”变成“下次 agent 可以直接用的经验”。

Input Contract

优先读取：

../../../../docs/architecture/LAYER_CONTRACTS.md
../../../../docs/architecture/ARTIFACT_CONTRACTS.md
../templates/lesson-template.md
../../../../Setup/jobs/<job_name>/reviews/round-*.json
导出预览 PNG

Output Contract

这个 skill 有两个层次的产物：

../../../../Setup/jobs/<job_name>/reviews/round-*.json
../lessons/*.md

如果只是本轮观察，还没抽象成通用规律，就先留在 round-review.json，不要直接写进 lesson。

When To Capture A Lesson

遇到下面这些情况就应该考虑沉淀：

导出 PNG 后才发现布局很乱
字体、文本块、尺寸反复调不对
connector 画早了导致整图难以维护
bridge / session / save / export 出现可复用的恢复经验
planner 的图分类或区域拆解明显误判
某个 drawskill 规则明显该补

Capture Workflow

先写清现象，不要一上来就写结论
抽离任务特有细节，保留可泛化信息
用 ../templates/lesson-template.md 记录
存到 ../lessons/
如果经验需要变成规则：
- 规划层经验 -> 更新 plannerskills
- 操作层经验 -> 更新 visioskills
- 构图层经验 -> 更新 drawskills
- 只是暂时观察 -> 先留在 reviews/

Writing Rule

lesson 必须写成 generalized knowledge，不写成一次任务的流水账。

Files To Read

../templates/lesson-template.md
../../../../AGENT_GUIDE.md
../../../../docs/architecture/LAYER_CONTRACTS.md
../../drawskills/visio-figure-builder/references/layout-iteration-notes.md