Execute a plan step-by-step with verification. Use when you have a plan document — canonically specs/plans/<milestone>.md from /ctx-task-out — and need disciplined, checkpointed implementation.
Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.
Um comando direto ignora o prompt de revisão. Verifique a origem antes de executá-lo.
Execute a plan step-by-step with verification. Use when you have a plan document — canonically specs/plans/<milestone>.md from /ctx-task-out — and need disciplined, checkpointed implementation.
Take a plan — canonically specs/plans/<milestone>.md as written
by /ctx-task-out, though inline text, another file path, or a
plan from the conversation also work — and execute it
step-by-step with build/test verification between steps.
When to Use
After /ctx-task-out has decomposed a spec into
specs/plans/<milestone>.md (the canonical input)
When the user provides a plan document or file and says
"implement this"
When a multi-step task has been planned and needs disciplined
execution
When the user wants checkpointed progress with verification
at each step
After /ctx-brainstorm or plan mode produces an approved plan
When NOT to Use
For single-step tasks: just do them directly
When handed a bare multi-milestone spec instead of a plan:
suggest /ctx-task-out --spec <path> --milestone <first>
first; decomposing on the fly is what it exists to prevent
When the plan is vague or incomplete: use /ctx-brainstorm
first to refine it
When the user wants to explore or discuss, not execute
When changes are trivial (typo fix, config tweak)
Usage Examples
/ctx-implement
/ctx-implement specs/plans/m0a.md
/ctx-implement path/to/plan.md
/ctx-implement (the plan from our discussion above)
Process
1. Load the plan
If a file path is provided, read it
If the file is a multi-milestone spec rather than a plan (no
task breakdown, no acceptance criteria, spans milestones),
redirect: suggest and stop rather than improvising a decomposition
/ctx-task-out --spec <path> --milestone <first>
If the plan's header shows Status: Blocked, stop: a
deferrable TBD graduated to blocking mid-milestone. Route its
resolution (a spec edit or DECISIONS.md entry) and a
/ctx-task-out amendment run before executing further tasks
If inline text is provided, use it directly
If neither, look back in the conversation for the most
recent plan or approved design
If no plan can be found, ask the user for one
2. Break into steps
Parse the plan into discrete, checkable steps. Each step
should be:
Atomic: one logical change (a file, a function, a test)
Verifiable: has a clear pass/fail check
Ordered: dependencies respected (create before use,
test after implement)
Present the step list to the user for confirmation:
Implementation plan (N steps):
[Step description] - verify: [check]
[Step description] - verify: [check]
...
Ready to start?
3. Execute step-by-step
For each step:
Announce what you're doing (one line)
Think through the change before writing code: what does
it touch, what could break, what's the simplest correct path?
Implement the change
Verify with the appropriate check:
Task from a task-out plan → its acceptance criterion,
verbatim (in addition to the map below)
Go code changed → CGO_ENABLED=0 go build -o /dev/null ./cmd/ctx
Tests affected → CGO_ENABLED=0 go test ./...
Config/template changed → build to verify embeds
Docs only → no verification needed
Report step result: pass or fail
If failed: stop, diagnose, fix, re-verify before
moving to the next step
Verify after every individual step before proceeding to the next.
4. Checkpoint progress
After every 3-5 steps (or after a significant milestone):
Summarize what has been completed
If executing specs/plans/<milestone>.md, update the execution
ledger (see Ledger Duties below)
Note any deviations from the plan
Ask the user if they want to continue, adjust, or stop
5. Wrap up
After all steps complete:
Run a final full verification (make check or
CGO_ENABLED=0 go build && go test ./...)
Summarize what was implemented
Note any deviations from the original plan
Suggest context to persist (decisions, learnings, tasks)
Ledger Duties (plans from /ctx-task-out)
A task-out plan is the execution ledger — the only record of
milestone progress. Executing one carries four bookkeeping duties:
st is the record. Flip a task's st cell to [x] only
when its acceptance criterion has demonstrably passed — the
command ran, the test is green, the behavior was observed.
Tasks obsoleted by amendment become [o]. st never moves
backwards silently; a regression is a deviation to report.
DoD is not yours to derive. Scope & DoD checkboxes are
confirmed by measurement or by the user — never checked because
the tasks that "cover" them are done. The rolling-wave gate
reads DoD only; deriving it from task completion defeats the
gate.
Project epics outward. TASKS.md epics carry disjoint
task-id ranges (Plan: specs/plans/<milestone>.md (Txx–Tyy)).
When every task in a range is [x] or [o], mark that epic
[x]. Sync is one-way, plan → TASKS.md; never track task
state in TASKS.md directly.
Amendments, not edits. Never edit a task's acceptance
criterion in place; a criterion change goes back through
/ctx-task-out (amendment mode). When a measurement gate
fires (Risks & measurement gates), stop and route the outcome
through an amendment before executing dependent tasks.
Step Verification Map
Change type
Verification command
Go source code
CGO_ENABLED=0 go build -o /dev/null ./cmd/ctx
Test files
CGO_ENABLED=0 go test ./...
Templates/embeds
CGO_ENABLED=0 go build -o /dev/null ./cmd/ctx
Makefile
Run the new/changed target
Skill files
Build (to verify embed) + check live copy matches
Docs/Markdown only
None required
Shell scripts
bash -n script.sh (syntax check)
Handling Failures
When a step fails verification:
Don't panic: read the error output carefully
Reason through the failure step-by-step before attempting
a fix; understand the cause, not just the symptom
Fix the issue in the current step
Re-verify the fix
Only then move to the next step
If the fix changes the plan, note the deviation
If a step fails repeatedly (3+ attempts), stop and ask the
user for guidance rather than thrashing.
Output Format
Progress updates should be concise:
Step 1/6: Create ctx-next skill directory .......... OK
Step 2/6: Write SKILL.md template .................. OK
Step 3/6: Copy to live skill directory ............. OK
Step 4/6: Build to verify template embeds .......... OK
Step 5/6: Run tests ................................ OK
Step 6/6: Mark task in TASKS.md .................... OK
All 6 steps complete. Build and tests pass.
Examples
Good Implementation
Step 3/8: Add check target to Makefile
Added check: build audit after the audit target.
Verify: make check ... build OK, audit OK.
Result: PASS
Bad Implementation
"I'll implement the whole plan now"
[makes all changes at once without verification]
"Done! Everything should work."
(No step-by-step, no verification, no checkpoints: this
defeats the purpose of the skill.)
Quality Checklist
Before starting, verify:
Plan exists and is clear enough to execute
Steps are broken down and presented to the user
User confirmed readiness to proceed
During execution, verify:
Each step is verified before moving on
Failures are fixed in place, not deferred
Checkpoints happen every 3-5 steps
Task-out plans: st flipped only on demonstrated
acceptance; epics projected to TASKS.md when their range
completes; DoD boxes left to measurement or the user
