ctx-architecture

name	ctx-architecture
description	Build and maintain architecture maps. Use to create or refresh ARCHITECTURE.md and DETAILED_DESIGN.md. Supports principal mode for deeper analysis: vision, future direction, bottlenecks, implementation alternatives, gaps, upstream proposals, and intervention points.

Build and maintain two architecture documents incrementally: ARCHITECTURE.md (succinct project map, loaded at session start) and DETAILED_DESIGN.md (deep per-module reference, consulted on-demand). Coverage is tracked in map-tracking.json so each run extends the map rather than re-analyzing everything.

Execution Priority

When time or context budget runs short, execute in this order. Never skip a tier to do a lower one:

1. Authoritative truth first: ARCHITECTURE.md + DETAILED_DESIGN.md must be accurate and honest. Incomplete is fine; wrong is not.
2. Surface uncertainty honestly: partial coverage with correct confidence scores beats inflated scores. Mark what you don't know.
3. Offer judgment only where grounded: danger zones, extension points, improvement ideas only for modules you actually analyzed.
4. Prefer fewer sharp insights over many shallow sections: a CHEAT-SHEETS.md with one excellent cheat sheet beats five thin ones. An ARCHITECTURE-PRINCIPAL.md with three concrete risks beats ten vague ones.

Mode Detection

Read the invocation for a mode keyword:

• No keyword (or default) → run Default mode (Phases 0-5 below)
• principal → run Principal mode (Phases 0-5 + Principal phases P1-P3)

Examples:

/ctx-architecture
/ctx-architecture principal
/ctx-architecture (principal)

---

When to Use

• First time setting up architecture documentation for a project
• Periodically to refresh stale module coverage after significant changes
• After major refactors, new package additions, or dependency changes
• When the agent nudges that the map is stale (>30 days, commits detected)
• When you need deep understanding of a module before working on it
• When you want strategic analysis of the architecture (principal mode)

When NOT to Use

• For minor code changes that don't affect module boundaries or data flow
• When ARCHITECTURE.md just needs a quick path fix (use /ctx-drift instead)
• Repeatedly in the same session without intervening code changes
• When the user has opted out (opted_out: true in map-tracking.json)

---

Default Mode (Phases 0-5)

Phase 0: Check Opt-Out

Read .context/map-tracking.json. If it exists and opted_out: true, say:

Architecture mapping is opted out for this project. Delete .context/map-tracking.json to re-enable.

Then stop.

Phase 0.25: Companion Tool Check

Check if a web-search-with-citations MCP is available by attempting a simple query. The canonical implementation is Gemini Search (mcp__gemini-search__search_with_grounding); if your toolchain provides the same capability via a different server (Firecrawl, Exa, Tavily, etc.), use whatever is connected. This capability is for upstream documentation, design rationale, KEPs, peer-project patterns — anything outside the local codebase that helps understand why the code is shaped the way it is.

If available: note it silently. Use it throughout the analysis for upstream lookups. Prefer it over built-in web search.

If not available: silently fall back to built-in web search for upstream lookups. Do not prompt the user to install anything — ctx does not vouch for companion-tool install paths (see DECISIONS.md, 2026-05-23).

Important: this capability is for upstream and external context only. Do not use it to understand the local codebase — read the code directly. The depth of analysis comes from forced reading, not from search shortcuts.

Phase 0.5: Quick Structure Scan + Focus Areas

Before any deep analysis, do a lightweight structural survey to discover what the project actually contains. This takes seconds and makes the focus-area question concrete instead of open-ended.

Scan steps (no file reads - structure only):

# Detect ecosystem
ls go.mod package.json Cargo.toml pyproject.toml 2>/dev/null

# List top-level source directories / packages
# Go:
go list ./... 2>/dev/null | sed 's|.*/||' | sort -u | head -40
# or: ls internal/ cmd/ pkg/ 2>/dev/null

# Node/other: ls src/ lib/ packages/ 2>/dev/null

# Large monorepo guard: if >100 packages, limit to top 2 levels only
find . -mindepth 1 -maxdepth 2 -type d \
  ! -path './.git/*' ! -path './vendor/*' ! -path './node_modules/*' \
  | sort | head -60

Then ask (present the discovered package/module names):

I found these top-level packages/modules:
  [list from scan]

Any specific areas you'd like me to go deep on? You can name
packages from the list above, describe subsystems (e.g. "the
reconciler loop", "auth handling"), or say "all" for a uniform
pass.

Skip or press enter to do a standard uniform pass.

If focus areas are given, carry them forward:

• Phase 2 goes deep on focus packages (target confidence ≥ 0.8)
• Direct dependencies of focus packages get a solid pass (≥ 0.7)
• All other packages are stubbed (0.2) unless they appear as transitive dependencies
• DETAILED_DESIGN.md sections for focus packages are written first and in full detail
• Principal mode Phase P2 strategic questions reference the focus areas explicitly

If "all" or no answer, proceed with standard uniform analysis.

Phase 1: Assess Current State

Determine if this is a first run or subsequent run:

• First run: no .context/map-tracking.json exists
• Subsequent run: tracking file exists with coverage data

For subsequent runs, identify the frontier: modules that need analysis:

1. Read map-tracking.json for coverage state
2. For each covered module, check staleness:

git log --oneline --since="<last_analyzed>" \
-- <module_path>/

3. Frontier = uncovered modules + stale modules (commits after last_analyzed) + low-confidence modules (confidence < 0.7)

Phase 2: Survey (First Run) or Analyze Frontier (Subsequent Run)

First run: full survey:

0. Run ctx deps to bootstrap the dependency graph:

   ctx deps
   

   Auto-detects the ecosystem (Go, Node.js, Python, Rust) from manifest files. Use this as the starting point for "Package Dependency Graph": verify and enrich with semantic context.

1. Read the project manifest for project identity (name, version, description): ctx deps covers the dependency tree

2. Explore directory structure:

   ctx status
   

3. Read key files in each package: exported types, functions, imports

4. Trace data flow through main entry points

5. Identify architectural patterns (dependency injection, interfaces, registries)

Subsequent run: targeted analysis:

1. For each frontier module, read its source files
2. Trace data flow and dependencies
3. Note changes since last analysis
4. Update confidence based on depth of understanding

Phase 3: Update Documents

ARCHITECTURE.md: update ONLY if module boundaries, dependency graph, data flow, or key patterns changed. Internal implementation changes do NOT warrant updates. Target: under 4000 tokens (~16KB) so ARCHITECTURE.md loads within the session-start context budget.

Required sections:

• Overview (design philosophy, key concepts)
• Package Dependency Graph (mermaid graph TD)
• Component Map (tables: package, purpose, depends on)
• Data Flow (mermaid sequence diagrams for key operations)
• Key Architectural Patterns
• File Layout (ASCII tree)

DETAILED_DESIGN.md: update per-module sections using this format:

## <module_path>

**Purpose**: One-line description.

**Key types**: List main structs/interfaces.

**Exported API**:
- `FuncName()`: what it does
- `Type.Method()`: what it does

**Data flow**: Entry → Processing → Output

Include an ASCII sequence diagram when there are 3+ actors or
non-obvious ordering:

Caller Scheduler Worker |--schedule()-->| | | |--dispatch()-->| | |<--result------| |<--done--------| |

Include an ASCII state diagram when the module manages lifecycle
or status transitions:

[Init] --configure()--> [Ready] --start()--> [Running] | | error()---------| |--stop()-->[ Stopped] | [Stopped] --reset()--> [Ready] [Failed]

Use plain ASCII (not mermaid) for DETAILED_DESIGN.md - it renders
in any terminal, editor, or raw file view without a renderer.
Reserve mermaid for ARCHITECTURE.md only.

**Edge cases**:
- Condition → behavior

**Performance considerations**:
- Known or likely bottlenecks (hot paths, allocation pressure,
  lock contention, I/O bound operations)
- Scale assumptions baked into the design (e.g. "assumes <1000
  items", "single-threaded reconcile loop")
- What breaks first under load

**Danger zones** (top 3 riskiest modification points):
1. `<symbol or area>` - why it's dangerous (hidden coupling,
   ordering assumption, shared mutable state, etc.)
2. ...
3. ...

**Control loop & ownership** (if the module participates in
reconciliation or state management):
- What owns the reconciliation for this module's resources?
- What is source of truth vs. derived/cached state?
- What triggers re-reconciliation?

**Extension points** (where features would naturally attach):
- `<symbol or pattern>` - what kind of extension fits here

**Improvement ideas** (1-3 concrete suggestions, not generic):
- `<specific change>` - what it fixes and why it's feasible

**Dependencies**: list of internal packages used

Splitting DETAILED_DESIGN.md when it grows large:

When DETAILED_DESIGN.md exceeds ~600 lines or covers 3+ natural domains, split into domain files and keep a shallow index:

• DETAILED_DESIGN.md - index only (domain name, file pointer, module list, one-line domain purpose)
• DETAILED_DESIGN-<domain>.md - full module sections for that domain

Domains are natural groupings, not arbitrary splits. Examples:

• storage, auth, api, reconciler, cli, observability
• If no natural grouping exists, split by: core vs. peripheral

Index format:

# Detailed Design Index

| Domain  | File                       | Modules              | Summary           |
|---------|----------------------------|----------------------|-------------------|
| storage | DETAILED_DESIGN-storage.md | pkg/store, pkg/cache | Persistence layer |
| auth    | DETAILED_DESIGN-auth.md    | pkg/authn, pkg/authz | Identity + policy |

> See individual files for module-level detail.

Update map-tracking.json to record which domain file each module lives in:

"pkg/store": {
  "domain_file": "DETAILED_DESIGN-storage.md",
  ...
}

Each section is self-contained. The agent reads specific sections when working on a module, not the entire file.

CHEAT-SHEETS.md: write (or update) short mental models for key lifecycle flows. One cheat sheet per major lifecycle or flow identified in the codebase. Format:

## <Lifecycle or Flow Name>

Steps:
1. <event or trigger>
2. <what happens next>
3. ...

Key invariants:
- <thing that must always be true>

Common failure modes:
- <condition> → <outcome>

Flow (ASCII - include when sequence or state is non-obvious):

  [Trigger] --> [Step A] --> [Step B] --> [Done]
                               |
                            [Error] --> [Retry] --> [Dead Letter]

Aim for cheat sheets that fit on one screen. If a flow needs more than ~15 steps, split it. Write cheat sheets for at minimum:

• The main entry-point lifecycle (e.g. controller reconcile loop, request handler, CLI command dispatch)
• Any policy or rule evaluation flow
• Any significant async or background job lifecycle

Skip if the project has no meaningful lifecycles (e.g. a pure library with no runtime behavior).

GLOSSARY.md: append project-specific terms discovered during analysis. This captures the vocabulary that makes the codebase searchable: type names, internal concepts, abbreviations, and domain jargon that a new reader wouldn't know to search for.

Rules:

• Skip entirely if .context/GLOSSARY.md does not exist (the project hasn't opted into a glossary)
• Additive only: never modify or remove existing entries
• Maximum 10 new terms per run to avoid flooding
• Project-specific terms only: skip generic programming concepts (e.g. "mutex", "goroutine") and well-known patterns (e.g. "singleton"). Include terms that are unique to this codebase or used in a project-specific way
• Insert alphabetically into the existing list
• Format: **Term**: one-line definition
• Print added terms in the convergence report under a "Glossary additions" line

Phase 4: Update Tracking

Write .context/map-tracking.json with:

{
  "version": 1,
  "opted_out": false,
  "opted_out_at": null,
  "last_run": "<ISO-8601 timestamp>",
  "coverage": {
    "<module_path>": {
      "last_analyzed": "<ISO-8601 timestamp>",
      "confidence": <0.0-1.0>,
      "files_seen": ["file1.go", "file2.go"],
      "notes": "Brief summary of understanding"
    }
  }
}

Phase 5: Convergence Report + Search Prompts

Print a structured convergence report AND write it to .context/CONVERGENCE-REPORT.md. The printed version is the primary output the user reads. The file version is the artifact that /ctx-architecture-enrich and future sessions consume.

The source of truth for confidence scores is map-tracking.json. CONVERGENCE-REPORT.md is a human-readable view of that data - if they ever conflict, map-tracking.json wins.

Format:

## Convergence Report

### By Module

| Module | Confidence | Status | Blocker |
|--------|------------|--------|---------|
| pkg/foo | 0.9 | ✅ Converged | - |
| pkg/bar | 0.6 | 🔶 Shallow | Internal flow unclear |
| pkg/baz | 0.2 | 🔴 Stubbed | Not analyzed |

### By Domain (if natural groupings exist)

Group related modules and show aggregate coverage:
  e.g. "Auth layer: 2/3 modules converged (avg 0.72)"

### Overall

- Total modules: N
- Converged (≥ 0.9): N  ✅
- Solid (0.7-0.89): N   🟡
- Shallow (0.4-0.69): N 🔶
- Stubbed (< 0.4): N    🔴

### What Would Help Next

For each non-converged module, print a specific suggestion:

🔶 pkg/bar (0.6) - Shallow
  → Read the test files to understand expected behavior under
    edge cases: `pkg/bar/*_test.go`
  → Trace the internal flow through <specific function identified>
  → Ask: "walk me through what happens when X"

🔴 pkg/baz (0.2) - Not analyzed
  → Run /ctx-architecture with focus area: pkg/baz
  → Or: open pkg/baz/README.md if present

### Convergence Verdict

One of:
- ✅ CONVERGED - all modules ≥ 0.9, frontier empty. Further runs
  without code changes won't improve coverage.
- 🟡 MOSTLY CONVERGED - core modules ≥ 0.9, peripheral modules
  shallow. Diminishing returns on full re-run; use focus areas.
- 🔶 PARTIAL - significant modules below 0.7. Re-run with focus
  areas or read tests.
- 🔴 INCOMPLETE - substantial portions unanalyzed. Run again.

Convergence thresholds:

• Module is converged at confidence ≥ 0.9
• Project is converged when all non-peripheral modules ≥ 0.9
• Peripheral = no other modules depend on it AND it has no exported API surface (pure internal helpers, generated code, vendor)

Blocker vocabulary (use these consistently in the table):

• Internal flow unclear - exports known, internals not traced
• Not analyzed - directory listed only
• Tests not read - implementation known, behavior under edge cases unknown
• Design rationale unknown - code understood, "why" is unclear
• Converged - nothing left to learn from static reading

---

After printing the convergence verdict, append a Search Prompts section. The skill has just read the codebase and knows its jargon - this is the most useful thing it can hand back to someone who is not blocked by intelligence but by not knowing the right words.

Format:

## Search Prompts

The right keyword changes everything. Based on what I found in
the codebase, here are targeted searches worth running - in your
internal docs, Confluence, Notion, Slack, or publicly:

### Fill the gaps (ranked by how much they'd help)

For modules/areas still below 0.9:

🔶 pkg/bar - Internal flow unclear
  Try searching:
  - "<SpecificTypeName> design" or "<SpecificTypeName> internals"
  - "<pattern observed, e.g. 'leader election'>  <project name>"
  - "why does <ProjectName> use <pattern>" (ADR or design doc)

🔴 pkg/baz - Not analyzed
  Try searching:
  - "<package name> <project name> explained"
  - "<key interface or type found> behavior"

### Concepts worth understanding deeply

List 3-5 technical concepts the codebase clearly depends on but
that can't be learned from the code alone. Give the exact search
phrase, not a topic:

- "<ExactConceptName> explained" - e.g. "etcd watch semantics
  explained", "CRDT merge strategies", "OIDC token refresh flow"
- "<pattern name> tradeoffs" - e.g. "saga pattern vs 2PC tradeoffs"

### Architecture decision records (if relevant)

If the code shows signs of a deliberate non-obvious choice
(e.g. custom retry logic instead of a library, unusual data
structure), suggest:
  - "<ProjectName> <decision> ADR"
  - "<ProjectName> <decision> RFC"
  - "why <ProjectName> doesn't use <obvious alternative>"

---
Note: I won't run these searches for you - you may have internal
docs where these are more useful than public results, and you know
which sources to trust. Pick the phrases that match what's blocking
you.

Rules for this section:

• Always generate search prompts, even for converged modules - there's always design rationale that code can't express
• Phrases must be concrete and use actual names/types from the codebase - no generic "learn more about X" fluff
• Rank by usefulness: gaps in shallow modules first, concepts second, ADRs third
• Maximum ~10 phrases total; fewer sharp ones beat many vague ones
• Default: do NOT run the searches yourself
• Exception: if a web-search-with-citations MCP is available (Gemini Search is the canonical example; equivalents include Firecrawl, Exa, Tavily), you MAY run upstream searches for KEPs, design docs, peer-project patterns, and ADRs — but only for concepts the codebase shows clear dependency on. Note what you searched and what you found. This applies in any mode, not just principal mode.
• If no such MCP is available and the user requested principal-mode depth, fall back to built-in web search for the same purpose

---

Principal Mode (Phases 0-5 + P1-P3)

Run all default mode phases first (0-5), then continue below. Principal mode is for strategic thinking - beyond "what is" to "what could be" and "what should concern us."

Phase P1: Extended Context Gathering

In addition to the default phase sources, read:

• .context/TASKS.md - outstanding work, future plans
• CHANGELOG.md or docs/changelog.md - trajectory of decisions
• docs/ - any design rationale in user-facing docs
• Recent git log: git log --oneline -30

Phase P2: Gather Strategic Context

Two-tier behavior - do not stall:

If answers are available (user provided them in the prompt, or they exist in .context/TASKS.md / DECISIONS.md): use them. Do not ask for what you already have.

If answers are not available: do NOT stop. Generate a provisional principal analysis with assumptions explicitly labeled (see Principal Mode Fallback below). Include a "Questions That Would Sharpen This" section at the end of ARCHITECTURE-PRINCIPAL.md.

When asking the user, present all questions at once as a numbered list - do not ask one-at-a-time:

Before I write the principal analysis, a few questions - skip
or say "unsure" on anything you don't know:

0. **Focus areas** (if not already set in Phase 0.5)

1. **Vision**: What is this project trying to become in 12-24 months?

2. **Future direction**: Any architectural pivots being considered?
   (plugin system, multi-tenant, cloud sync, daemon model, etc.)

3. **Known bottlenecks**: Where does the current design hurt you?

4. **Implementation alternatives**: Any decisions you'd do
   differently starting fresh?

5. **Gaps**: What's missing that you expect to need?

6. **Areas of improvement**: Known tech debt or structural awkwardness?

Phase P3: Write Principal Analysis

After collecting answers, write .context/ARCHITECTURE-PRINCIPAL.md (separate from ARCHITECTURE.md - speculation must not pollute the authoritative doc).

# Architecture - Principal Analysis
_Generated <date>. Strategic analysis only; see ARCHITECTURE.md
for the authoritative architecture reference._

## Current State Summary
[Condensed narrative of the current architecture - ~1 page max]

## Vision Alignment
[How does the current architecture support or constrain the stated
vision? What structural changes would enable it?]

## Future Direction
[Architectural implications of planned pivots or new capabilities.
What would need to change if [feature X] were added?]

## Known Bottlenecks
[Analysis of performance, scalability, or dev-experience pain
points identified in the codebase or raised by the user]

## Implementation Alternatives
[For 2-3 key design decisions: current approach, alternatives,
tradeoffs]

## Gaps
[Missing capabilities or abstractions the architecture doesn't
handle yet but probably will need to]

## Areas of Improvement
Ranked by impact/effort:
- **High impact, low effort** (do first)
- **High impact, high effort** (plan for)
- **Low impact** (defer or skip)

## Risks
[Architectural risks as the system scales, team grows, or
requirements evolve]

## Intervention Points
Top 5 highest-leverage places to implement new features or
improvements, ranked by impact/effort:
1. `<symbol or subsystem>` - what kind of change fits here and why
2. ...

(These are concrete locations - package paths, interface names,
function boundaries - not vague subsystem labels.)

## Upstream Proposals
2-3 changes worth proposing to the project upstream (KEP / RFC /
issue style thinking). For each:
- **What**: one-sentence description of the change
- **Why**: what problem it solves that the current design can't
- **Where**: which abstraction boundary it touches
- : what it breaks or complicates

Each proposal must cross an abstraction boundary - it must affect
how modules interact, not just refactor internals. If it doesn't
change an interface, a contract, or an ownership boundary, it's
not upstream-worthy; it's a local improvement (put it in
Improvement Ideas instead).


What would need to change for this to work at enterprise scale?
 Multi-cluster / multi-tenant gaps
 Observability and debuggability holes
 Operational hardening missing from current design
 What a large customer would hit first


[Hidden assumptions baked into the architecture. What breaks
silently vs. loudly? What would cause a cascade? What does the
system assume about its environment that may not hold?]


[Practical, not theoretical - this is what a new engineer actually
hits in week one:]
 What makes this system hard to understand quickly?
 Which modules require tribal knowledge to use safely?
 Where would a new engineer get stuck first, and why?
 What isn't written down anywhere?

Boundary hygiene - ARCHITECTURE-PRINCIPAL.md is for synthesis, leverage, risk, direction, and judgment. Do NOT restate module details that already exist in DETAILED_DESIGN.md. Reference module paths only where needed to ground an argument. If you find yourself summarizing what a module does, stop - link to it instead.

Principal mode fallback - if Phase P2 answers were not provided, label speculative sections clearly and add at the end:

## Questions That Would Sharpen This Analysis

Answering any of these would move speculative sections to grounded ones:

1. **Vision** - What is this project trying to become in 12-24 months?
2. **Future direction** - Any architectural pivots being considered?
3. **Known bottlenecks** - Where does the current design hurt?
4. **Assumptions marked** - These sections are labeled [inferred]:
   [list them]

Autonomous inferences - principal mode must also answer the following from the codebase alone, without waiting for user input. These are things the code is silently deciding. Surface them:

• Where are abstraction boundaries likely to calcify under growth?
• Which current APIs are accidentally becoming public contracts?
• What will become expensive when team size or data volume doubles?
• Where is the architecture optimized for current workflow rather than long-term extensibility?
• Which parts are structurally elegant but strategically wrong for the likely future?

These go in a dedicated "Silent Choices" section in ARCHITECTURE-PRINCIPAL.md. The code is making bets - name them.

Opinion floor - ARCHITECTURE-PRINCIPAL.md must contain at minimum:

• 3 risks (specific, not "this could be slow")
• 3 improvement ideas (concrete, not "add more tests")
• 2 upstream opportunities (actionable, not "contribute more")

Generate opinions, not just descriptions. If you find yourself writing neutral summaries, push harder.

When in doubt, prefer a strong, falsifiable opinion over a safe, generic one. Weak opinions are noise; strong opinions can be corrected.

Cross-project comparison (include when the codebase shows non-obvious design choices or when focus areas have well-known peers):

For any module where a comparable exists in another project, add:

### Compared to <PeerProject>/<Component>

- What <ThisProject> does differently
- What <PeerProject> does better
- What could be unified or learned from

Examples worth comparing when relevant:

• Velero vs Stash (backup)
• controller-runtime reconciler vs custom loops
• Gatekeeper vs Kyverno (policy)
• Any CNCF project vs its closest peer

Skip if no meaningful peer exists. Do not force comparisons.

Be direct. This document is for engineering judgment, not external audiences.

Phase P4: Write DANGER-ZONES.md

Extract danger zones from all DETAILED_DESIGN.md module sections and compile them into a standalone .context/DANGER-ZONES.md. This is the consolidated view - one document a reviewer or new engineer can read to know where the dragons live.

# Danger Zones

_Generated <date> from DETAILED_DESIGN.md danger zone sections.
Run `/ctx-architecture-enrich` to add verified blast radius data._

## Summary

| Module | Zone | Risk | Why |
|--------|------|------|-----|
| <path> | <symbol/area> | HIGH/MEDIUM/LOW | one-line reason |

## By Module

### <module_path>

1. **<symbol or area>** - <why it's dangerous>
   - Hidden coupling / ordering assumption / shared mutable state
   - Modification advice: <what to check before changing>

2. ...

Rules:

• Only include danger zones from modules actually analyzed (confidence ≥ 0.4)
• Risk level is the skill's judgment based on code reading: HIGH (will break things), MEDIUM (likely to cause subtle bugs), LOW (worth knowing but manageable)
• /ctx-architecture-enrich can later add verified blast radius numbers - leave room for that (don't claim precision you don't have from reading alone)
• If no danger zones were identified, skip the file entirely rather than writing an empty one

---

Confidence Rubric

Score by decision usefulness, not descriptive completeness. Ask: "What could an engineer safely do with this understanding?"

Level	Decision usefulness
0.0 - 0.3	Stubbed: not safe to make any decisions; directory listed only
0.4 - 0.6	Shallow: can describe purpose; not safe to modify without more reading
0.7 - 0.79	Safe to make localized changes with care; can review simple PRs
0.8 - 0.89	Can reason about design tradeoffs; safe to design changes in this module
0.9 - 1.0	Can predict likely breakage from non-trivial changes; safe to own the module

Inflate scores and you lie to the next agent that reads the tracking file. Under-score and the convergence report will never clear. Score the decision-usefulness honestly.

Opt-Out Handling

If the user says "never", "don't ask again", or similar:

1. Set opted_out: true and opted_out_at: "<timestamp>" in map-tracking.json
2. Confirm: "Noted: won't ask again. Delete .context/map-tracking.json to re-enable."
3. On future invocations, exit immediately with brief message

Nudge Behavior

The agent MAY suggest /ctx-architecture during session start when:

• No tracking file: "This project doesn't have an architecture map yet. Want me to run /ctx-architecture?"
• Stale (>30 days): "The architecture map hasn't been updated since and there are commits touching modules. Want me to refresh?"
• Opted out: say nothing

The nudge is a suggestion, not automatic execution.

Quality Checklist

After running, verify:

• ARCHITECTURE.md is under 4000 tokens (~16KB)
• ARCHITECTURE.md has all required sections (Overview, Dependency Graph, Component Map, Data Flow, Key Patterns, File Layout)
• DETAILED_DESIGN.md uses consistent per-module format
• Each module section has Purpose, Key types, Exported API, Data flow, Edge cases, Performance considerations, Control loop & ownership (if applicable), Danger zones, Extension points, Improvement ideas, Dependencies
• ASCII sequence diagram included when 3+ actors or non-obvious ordering
• ASCII state diagram included when module manages lifecycle or status transitions
• No mermaid in DETAILED_DESIGN.md (ASCII only)
• If DETAILED_DESIGN.md > ~600 lines or 3+ domains: split into domain files with shallow index
• map-tracking.json records domain_file for each module when split
• map-tracking.json is valid JSON with version, coverage entries
• Confidence levels are honest (not inflated)
• Stale modules were re-analyzed, not just marked current
• ARCHITECTURE.md was only updated for boundary/flow/dependency changes, not internal implementation details
• Convergence report printed with per-module table
• Domain groupings shown if natural groupings exist
• Each non-converged module has a specific "what would help" suggestion (not generic advice)
• Overall convergence verdict stated (CONVERGED / MOSTLY / PARTIAL / INCOMPLETE)
• Blocker column uses consistent vocabulary
• Search Prompts section printed after convergence verdict
• Search phrases use actual type/function/pattern names from the codebase (not generic topics)